Custom Fit Trailer Hitch Receiver for 2014 Toyota Prius C

Question

Question:

I just want to confirm that this is the correct hitch for the 2014 model Prius C. Thank you.

asked by: Billy H

0

Expert Reply:

You are correct, the Draw-Tite Sportframe Trailer Hitch Receiver, # 24971, has been confirmed to fit your 2014 Toyota Prius c.

expert reply by: Leah S

0

Answer 1

We do have Class I hitches confirmed to fit your 2014 Toyota Prius C, including Curt hitch #C11484, that you can see on the linked page. We do not have a hitch part 35799. I recommend the Draw-Tite #24971 over the Curt hitch since it does not have…

view full answer...

Answer 2

In order to carry 2 bikes on your 2013 Toyota Prius c, one of which is a 57 pound electric bike, you will need to install a trailer hitch and use a hitch mounted bike rack. The Saris Freedom, #SA4412B, is a hitch mounted bike rack, it is compatible…

view full answer...

Answer 3

In the owners manual Toyota does not recommend towing a trailer with your 2014 Toyota Prius C, or even installing a hitch. However, if you choose to do so, I can recommend the parts you will need. We offer two hitches for your 2014 Toyota Prius C,…

view full answer...

Answer 4

That's a good question, and between the Curt Trailer Hitch Receiver #C11484 and the Draw-Tite Trailer Hitch Receiver #24971 that fit your 2012 Toyota Prius C, the best option is definitely the Draw-Tite #24971. The reason the Draw-Tite is the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Custom Fit Trailer Hitch Receiver for 2014 Toyota Prius C

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching