Recommended 7-Way Wiring Harness And Brake Controller For 2006 Lincoln Navigator With Factory 4-Way
Question:
I have a 2006 Lincoln Navigator with a factory 4 prong plug and I want to convert it to a 7 plug to use my electric brakes on my trailer whats the best way to do that and what kit do I use.
asked by: Jeff
Expert Reply:
In order to convert your wiring to operate the brakes on your trailer you will need a couple of items.
First, I recommend part # 37185. This will plug into your 4-way plug and with additional wiring will give you a 7-way connector and a 4-way connector at the back of your Navigator.
You will also need a brake controller. I recommend the Prodigy P3, part # 90195. This is one of our most popular brake controllers for electric brakes because it is easy to install and operate.This is a proportional controller that activates your trailer brakes in proportion to the Navigator braking action.
You will also need the Plug-In Wiring Adapter, part # 3035-P. One end simply plugs into the back of the controller and the other end plugs into the built-in port beneath the dash of your Lincoln.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Adapter 7 Pole to 4 Pole with Tester and Cover
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 7 Round - Blade
- Plug Only
- 4 Flat
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Review of Buyers Products Tailgate - 3373014999
- Search Results: 6 pin to 7 pin adapter
- Shop: Conventional Ramp Door Spring for 7' Wide Enclosed Trailer - Dual Spring - 120-lb Capacity
- Shop: Replacement Roller Wheel for Buyers Products EZ Gate Tailgate Assist - Qty 1
- Q&A: 7 Pole to 4 Pole Adapter For 2018 Nissan Pathfinder
- Q&A: Troubleshooting Trailer Using 6-Way to 7-Way Adapter Where Brakes Are Always Locked Up
- Q&A: Wiring Diagram for the Adapter 6-Pole to 7-Pole Trailer Wiring Adapter # 47435
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Shop: Trailer Hitch
- Video: Conventional Ramp Door Spring Review
- Q&A: Picking Out Replacement Axle for Snowbear 550LHD Trailer
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Shop: Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 185-lb Capacity
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Shop: Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 250-lb Capacity
- Video: Review of M-3 and Associates Enclosed Trailer Parts - Ramp Door Spring - M394FR
- Q&A: Wiring Diagram for Bargman 7-Way RV Style Connector # WG54006-043
- Search Results: 68149
- Shop: Trailer Wiring
- Shop: Brake Controller
- Video: Review of M-3 and Associates Trailer Ramp Springs - Ramp Door Dual Spring - CB250D96SHD
- Shop: Ramp Spring - 2K Torque for 1-1/2" Round Shaft - LH
- Search Results: dust cap
- Shop: Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 230-lb Capacity
- Search Results: ramp door spring
- Video: Review of TRC Enclosed Trailer Parts - Ramp Door Spring - 362SA8HD
- Shop: Fifth Wheel Hitch
- Video: Review of TRC Enclosed Trailer Parts - Ramp Door Spring - 362SA7
- Shop: Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 120-lb Capacity
on Trailer Wiring
