Trailer Hitch for a 2013 Hyundai Santa Fe with Dual Exhaust
Question:
Will this hitch work with the factory dual exhaust? One specifically states that it will not fit dual exhaust equipped cars. I see no mention of dual exhaust on this hitch.
asked by: Michael I
Expert Reply:
On Curt trailer hitch # C13152 it only fits the 2013 Hyundai Santa Fe models that have either the 2.0 liter or 2.4 liter 4 cylinder motor. I don't believe that models with dual exhaust had either of those motors so it would not be a fit.
Curt hitch # C13153 fits models with dual exhaust (GLS and Limited, not Sport). I have included a link to a video showing it being installed on a 2013 Santa Fe with dual exhaust. It doesn't look like any of the hitches that fit the Sport models will fit with dual exhaust.
For Curt hitch # C13153 if you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
For trailer wiring, if the vehicle came with the factory tow package, use # C56332. If it did not come with the factory tow package use # C56184.
Products Referenced in This Question
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Brake Controller for 2019 Ford Edge With Factory Tow Package
- Q&A: Are There Different Size 4-Way Round Connectors Available?
- Q&A: Aero Bar Roof Rack that Fits 2022 Toyota Highlander
- Q&A: Recommended Hitch for a 2014 Hyundai Santa Fe Sport
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How to Determine if 2015 Kia Sorento EX Has Factory Tow Prep Package
- Q&A: Dexter Hub Replacement for Hub Part # K08-219-9B
- Q&A: Correct Replacement Load Stops for TracRac Ladder Rack
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size