Can Sway Control Plate # RP26003 be Flipped for Use on Left of Ball Mount on 2009 Toyota Highlander
Question:
Why cant I flip over adapter plate #26003 and attach to bottom of ball base so it is upside down and held by shank nut/washer? I cant figure out from picture how left sided plate[#3475] attaches since it is more complicated than simple mirror image of #26003. Thanks.
asked by: jim h
Expert Reply:
The Reese Sway Control Adapter Plate, # RP26003, cannot be flipped to be used on the left side of a ball mount because the lip (see photo) on the bottom of the plate would not allow the hitch ball for the sway control bar to be completely tightened to the plate.
Also, the lip would interfere with the sway control bar during turns which would not only damage the plate, but also affect the effectiveness of the sway control bar.
To use a sway control bar on the left hand side, I recommend having the Sway Control Tab, # 3442, welded to the left side of the ball mount. At this time, there are no bolt on brackets designed to mount the sway control bar on the left side.
Product Page this Question was Asked From
Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Sway Control Parts
- Brackets
- Reese
more information >
Continue Researching
- Shop: Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV
- Shop: Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 6" Drop - 7K
- Article: How to Measure for Trailer Hitch Drop
- Video: Review of Gen-Y Hitch Trailer Ball Mount - Adjustable Ball Mount - 325-GH-12005
- Video: Review of Gen-Y Hitch Sway Control Plate - GY33YR
- Video: Gen-Y Glyder Shock Absorbing Ball Mount Review
- Shop: Ball Mount 4" Rise or 5-1/4" Drop
- Video: Reese Dual Cam High-Performance Sway Control Review and Installation
- Video: Reese Friction Sway Control Kit Review
- Video: Review of Reese Weight Distribution - Friction Sway Bar - 83660
- Shop: Gen-Y Phantom X Ball Mount w/ Stacked Receivers for 2" Hitch - 6" Drop/4.5" Rise - 7K
- Shop: Curt Shock Absorbing Towing Kit w Sway Control, Wireless Brake Controller - 2-5/16" Ball - 7.5K
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch
- Q&A: Does Gen-Y Phantom X Reduce Hitch Tongue Weight Capacity For Motorcycle Carrier
- Q&A: Gen-Y Glyder Ball Mount to Improve Towing Ride Quality Experience
- Q&A: Can Fastway Flash E Series Adjustable Ball Mount be Used with Sway Control Device
- Q&A: Is Adjustable Ball Mount w/Sway Control Tab 7390 Compatible with Curt Friction Sway Control Bar
- Q&A: Cushioned Adjustable Ball Mount for Trailer with 480 lb Tongue Weight
- Q&A: Why Cant 2019 Audi Q7 Use Weight Distribution System
- Q&A: Installing Hitch Ball On Gen-Y Phantom X Adjustable Ball Mount GY87VR
- Search Results: sway control only
- Search Results: sway control
- Video: Review of Shocker Hitch Trailer Hitch Ball Mount - XR Adjustable Drop Mount 2-5/16" Ball - SHK78ZR
- Search Results: battery monitor
- Search Results: 44649
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: dust cap
- Article: The 5 Best Trailer Drop Hitches You Can Buy