How To Install a Brake Controller in a 2005 Dodge Ram 1500 with 4-Way
Question:
My truck only has a 4 way from the factory I have it wired to a 7 way and works fine for turn / light but just bought a fifth wheel and need the aux and electric brakes. Is there anything I can do without running the wires all the way up the frame. I have the plug in under the dash for the for the electric brakes but I guess it gos to nothing. Thank you advance for any help you can give me
asked by: Jeffrey A
Expert Reply:
The brake controller port you have found in your 2005 Dodge Ram doesn't go all the way back to the rear of your vehicle, it stops at the connector that is located under the driver's side wheel well. In order to finalize the installation you must splice into this wire and continue it back to the plug. I attached a picture that shows what the wire looks like in the harness.
I also attached an FAQ that details how to install a brake controller in a truck like yours.
If you need the 12 volt power circuit to be functional on your 7-way you will need to run a 10 gauge wire like part # 10-1-1 (sold by the foot), through a 40 amp circuit breaker like # PK54540 to the positive post of the battery.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. The needed install harness is the part # 3020-P.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Dodge
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Pollak Circuit Breaker - Cycling/Automatic Reset - 40 Amp - Straight Mount Bracket
- Accessories and Parts
- Wiring
- Circuit Breaker
- 40 Amp
- Pollak
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Q&A: Brake Controller Installation for a 2005 Dodge Ram 1500
- Shop: Trailer Wiring
- Video: Curt Wiring - Wiring Adapters - C57300 Review
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Towing Mirrors
- Article: Electric Brake Controller Installation on Dodge Ram Trucks to 2012
- Shop: CURT Dodge OEM Harness Adapter
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: brake controller
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Installation - 2006 Dodge Ram Pickup
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Search Results: wheel covers
- Q&A: Adding a 7-Way Trailer Connector to a 2005 Dodge Ram 1500 with Factory 4-Way
- Shop: Wheel Cover
- Search Results: caster wheels
- Shop: Suspension Enhancement
- Article: Brake Controller Installation: Starting from Scratch
- Video: Trailer Wiring Harness Adapter Installation - 2006 Dodge Ram 1500
- Q&A: How to Install a 7-Way Trailer Connector on a 1998 Dodge Ram for a Brake Controller
- Q&A: Adding a 7-Way Trailer Connector to a 2004 Dodge Ram with Factory 4-Way
- Video: Trailer Brake Controller Installation - 1990 Dodge Ram Pickup
- Search Results: anti~sway bar