bing tracking image
  1. Trailer Wiring
  2. Pollak
  3. Trailer Connectors
  4. Vehicle End Connector
  5. 7 Round - Blade
  6. Plug and Lead
THIS ITEM IS NOT A FIT FOR
2010 Chevrolet Silverado

Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket

Item # PK11898
Retail:$73.09
Our Price: $38.68
You Save: 47%
Trailer Wiring
Not Confirmed to Fit

2010 Chevrolet Silverado

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 1.32 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This kit provides a 7-pole, RV-style trailer connector, wiring harness and mounting bracket for adding an aftermarket socket. Wiring harness includes a 4', color-coded, 7-wire lead. Great Prices for the best trailer wiring from Pollak. Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket part number PK11898 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (87)
  • Q & A (0)
  • Photos

2010 Chevrolet Silverado - Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket

  • Trailer Connectors
  • Vehicle End Connector
  • 7 Round - Blade
  • Plug and Lead
  • 0 - 5 Feet Long
  • Pollak

This kit provides a 7-pole, RV-style trailer connector, wiring harness and mounting bracket for adding an aftermarket socket. Wiring harness includes a 4', color-coded, 7-wire lead.


Features:

  • Replacement 7-pole, sealed socket, RV-style trailer connector with pigtail and mounting bracket
  • High-impact nylon construction
    • Resists corrosion
  • 4' Long wiring harness
    • Hard-wires into vehicle wiring system
    • Has 1/2" convoluted tubing
    • Forms weathertight seal on back of socket
      • Keeps out moisture
      • Prevents corrosion
      • Includes color-coded, 7-wire leads that meet RVI standards
  • Right-angle mounting bracket
    • Convenient mount under rear bumper of truck or SUV
    • Zinc-plated construction
    • Black, epoxy coating
      • Protects against rust and corrosion
  • Spring-loaded lid with stainless steel spring and runner gasket
    • Prevents leaks when closed
    • Has drain slot and angled design for drainage
    • Includes wiring diagram for quick installation
  • Copper-plated terminal pins
    • High conductivity and low resistance
    • Sealed with silicone at the back of the socket
      • Prevents moisture from contacting mating connector


Specs:

  • Current rating: 30 amps
  • Volt rating: 12 volts
  • Wiring configuration:
    • Color - circuit - recommended wire gauge:
      • Red - Left Turn and Stop - 14 gauge
      • White - Ground - 10 gauge
      • Blue - Electric Brakes - 12 gauge
      • Green - Right Turn and Stop - 14 gauge
      • Black - Battery - 12 gauge
      • Brown - Running Lamps - 14 gauge
      • Yellow - Backup Lamps - 14 gauge
  • 1-Year limited warranty


11-898 Pollak 7-Way, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket

Replaces 20024



Customer Satisfaction Score:


Customer Reviews

Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket - PK11898

Average Customer Rating:  4.8 out of 5 stars   (87 Customer Reviews)

This kit provides a 7-pole, RV-style trailer connector, wiring harness and mounting bracket for adding an aftermarket socket. Wiring harness includes a 4', color-coded, 7-wire lead.

by:

This is the product I expected and it arrived in factory new condition.
To no fault of etrailer.com the currier wagon train and the ox’en that pulled the load were heading East. This was not the direction they were accustomed to so it took a few extra days. All in all good job I will do more business with this company.



by:

I wish than all trailer wiring was color coded the same. I have wired a lot of trucks ant trailers and trouble shot problems and always solved the problems. this one gave some serious thinking since the wiring was color coded different. But it is working and I do like the Pollak plug.



by:
2018 Chevrolet Express Van

I love Etrailer and especially, if your lucky enough to speak with any of the people on the phone



by:
2005 Isuzu N-Series

All the hardware is included to install.

Kevin

12/22/2023

The trailer brake plug is working great a year later as expected.



by:
1973 Chevrolet C/K Series Pickup

Installation was easy, good instructions. used this in conjunction with a Prodigy brake controller on a 1973 Chevy K20 square body pickup, replacing my original. wired using crimp on connectors, fast easy, clean. Re taped all connectors and loom. Used silicone on the back of the to seal off moisture.

Craig N.

8/27/2020

After a year of constant use the everything works perfect. So nice to hook up, plug in and go. Perfect.



by:

After I received this item, it just sat on the shelf until I could find the time to install. I just review this and I find the 7-pin plug is missing. The mounting flange and wiring harness is there, but not the 7-pin plug.

Etrailer Expert

Katrina B.

5/9/2023

Well you need the 7-pin plug! Let me get you over to our customer service department for them to get you this missing part.



by:

This was a perfect replacement for an old worn out 7-pole connector on my motorhome. This unit has a heavy guage wiring harness with standard color coding for each wire. The socket has a sturdy spring loaded cover that should keep out water a dirt. The instruction sheet includes a wiring diagram. I like that the connector socket can be easily removed from the wiring harness if it ever needs replacement.



by:
ChevroletSilverado

Although parts have only been installed less than a week this was a direct replacement for my Chevy Silverado 1500hd harness and outlet. I relocated from the side of the receiver to the bumper. Everything is provided in the kit. I used different hardware due to installing through bumper and different butt connections with heat shrink tubing because this was one of my reasons for replacing, the other being corrosion in harness to socket.



by:

Beware it took a week to get here from their warehouse 1 hrs away.



by:

Fast we'll packed shipping no damage.lights work great on my featherlite trailer.



by:

Appears to be high quality connector! I like the fact that it comes apart so you can mock it up on your truck's bumper, frame, etc. and the connector is well made and even has a seal inside making it watertight. Glad i bought it! Istall appears to be very easy and the length is long enough to where you can have options during install.



by:
Chevrolet

I ORDERED A WIRING PLUG FOR MY 1989 CHEVY CAR HAULER AND IT WAS PROMPTLY FILLED AND SENT WITHIN DAYS TO MY HOME.

IT IS EXACTLY WHAT I ORDERED AND WAS THE SECOND ONE I ORDERED FROM ETRAILER.COM

THE OTHER WAS FOR MY DODGE PICK UP A COUPLE MONTHS PAST.

MAIL SERVICE HAS ALWAYS BEEN VERY PROMPT TO ME SINCE MY FIRST ORDER MANY MONTHS AGO.

WOULD RECOMMEND ETRAILER.COM TO ALL FOR PROMPT SERVICE AND QUALITY ITEMS!!

Dan M.

5/25/2018

GOOD MORNING!! IT WAS THE SECOND UNIT I BOUGHT FROM YOUR COMPANY, AND BOTH ARE WORKING FINE WITHOUT ANY PROBLEMS. AS IN PAST, I WILL ALWAYS LOOK AT YOUR COMPANYS LIST OF PRODUCTS BEFORE I WOULD EVER GO TO ANYONE ELSE. THANK-YOU



by:
2001 ChevroletSilverado

The Curt hitch was delivered on time and in good condition.I had prepped the threaded holes in the frame earlier,which made install easy.Took all of 15 minutes ! This is my second time using Curt hitches,the last one on our 2013 Honda CRV.Great installation video and instructions. Would purchase again . Thanks!!!!

Jim L.

7/5/2017

terrific,thanks



by:

This has worked great on my vehicle. I put a 30-Lb magnet on bracket and that gives me the flexibility to mover the connector when in use.

JH

11/3/2020

Still working great. I like that it is hidden behind my bumper fascia until needed.



by:
2007 Ford F-150

his is the product if you do not have the trailer package on your vehicle. The 07 F150 I bought does not have the trailer towing package so I could not buy the plug and play version of this. The wire length is good so that you can easily locate the socket and still reach the vehicle's wiring harness. The instructions were good but I had trouble finding the correct lead for +battery to hook up to. Great price and delivery from etrailer as always.



by:

I want to thank Molly for all the help for pk11898 I have not yet installed this harness planning to do so to day weather here in McKeesport has not been that good. Again thank you Molly for all your help you are a asset to the company.

Cresson A.

4/12/2020

Works great



by:

I purchased this as a replacement for an identical wire harness already installed on my vehicle. Old harness was occassionally losing taillight/running lamps. Note that the new harness is the same make and model as old harness yet 2 wires are of different color (i.e. old + wire was red, new + wire is black)...so trace your wires carefully if performing a replacement.

Harness was received in just a few days and included all needed components for installation. I soldered and used heat shrink tubing on connections. The inclusion of waterproof butt connectors would be a good addition to this package instead of the included standard butt connectors.



by:
GMC

Great product. Very Well made and more than enough wiring to complete the job.
2000 GMC pickup and the wiring had been cobbled up back to the trailer receptacle.
Only took about 30 minutes to complete the job. The instructions regarding matching up the wiring from the truck to the new wiring harness were concise and easy to follow.



by:

Received precisely what I expected I was ordering. Looking forward to getting this installed.



by:
2008 Ford F-350, 450, and 550 Cab and Chassis

Product was just what I was looking for.
I would like to say something more about the etrailer.com customer service if I may.
I received a call from Molly with etrailer letting me know there was a slight shipping delay of one of my items in my order so if I did need it right away I could make necessary changes. I would like to personally thank Molly and the team at etrailer for going that extra mile!



by:

A very good harness and it is working fine a year after I installed it, however, the mounting screws are rusting so the reason it did not get a five-star review is because in my opinion the mounting screws should’ve been stainless steel



by:

It was exactly what I have been searhing for. E trailer has the fastest delivery and great customer service.

Peter G.

4/22/2014

Its been a year and the product still works great. Thanks again.



by:
2003 GMC Sierra

great parts / fast service



by:

This connector socket and wiring harness were exactly what my husband needed to get his truck and trailer working together. Thanks for providing this complete solution!



by:

Working great. Initial install required running at lest one wire from the distribution panel at the front of the PU to the back because Pick up was not originally wired for a 7 pole plug. Been doing its intended job.


25
87
Show More Reviews

See what our Experts say about this Pollak Trailer Wiring

  • How To Wire a 7-Way Trailer Connector On the Back of a Trailer
    In order to install a 7-way trailer wiring harness on the back of a trailer you'll simply need the Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness part # PK11898. The wires will splice into the tail light circuits that are already run to the rear. If you need to extend any of the circuits like the brake output or battery charge line you can simply purchase the correct gauge wire by the foot such as part # 10-1-1. We do offer the bonded 7-wire as part # DW04914-1 but this...
    view full answer...
  • Parts Needed to add Electric Trailer Brakes to 1990 Skamper 190c
    You are able to install an electric braking system on your trailer. The parts needed are going to be determined by the axle that your camper is equipped with. From what I can tell from your picture, it looks like this is a 4 lug axle which is going to likely mean you have a 2,000-lb axle with a 1-3/4" diameter. In order to verify that is correct you will need to confirm that the Inner and Outer bearings on your trailer wheel hubs match L44649. You can verify this once you've taken it apart...
    view full answer...
    Image 1 for
  • Recommended Proportional Brake Controller For 2013 Chevy Silverado 1500
    The best option for a proportional brake controller for your 2013 Chevy Silverado 1500 is from Redarc, and the brake controller and wiring adapter you need are the following part numbers: - Redarc Tow-Pro Liberty Trailer Brake Controller # RED24FR - Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR I really like the Liberty because of its control knob which not only keeps a cumbersome unit out of your cab, but also because it gives you more control over...
    view full answer...
  • How Much Clearance is Needed Behind 7-Way Trailer Connectors # PK11898 and # HM48470
    I have included some pictures showing how far the 7-Ways in # PK11898 and # HM48470 stick back behind the mounting brackets. On # PK11898 it is 3 inches. For # HM48470 it is 2-1/2 inches. I also included a picture showing what is essentially the same bracket for both (the one for # HM48470 is a little different) and all of the measurements. The one with # HM48470 top part sticks back slightly further though, about 1 inch total instead of 3/4 inches. In either case you could flip the bracket...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Brake Controller Installation on a 2001 Chevrolet Silverado With Factory Tow Package
    To get a 7-Way connector at the rear of your 2001 Chevrolet Silverado you will need to use the Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness, part # PK11898, if you have a bundle of wires above the spare tire. I would recommend using a circuit tester like the Quickee Tester, part # PTW2993, and test the wires for function. This is how the wires should normally attach by color. The Red wire on the harness will attach to the yellow wire above the spare and is for the...
    view full answer...
  • Brake Controller Doesn't Power Up Once Installed on a 2000 GMC Sierra 1500 4x4
    It sounds like you still need to make a couple connections under the hood of the truck. 2000 GMC Sierra models that did not come with a factory 7-Way do not have all the brake controller functions for you, but it is fairly easy to get everything hooked up and functioning. On the driver side under the hood, first remove the bracket in the top, driver side corner closest to the cab. This will allow you to remove the top and lower covers from your accessory fuse block. Once you have the...
    view full answer...
  • 7-Way Trailer Connector with Long Wiring Harness for a 1998 Chevy C/K Series 2500 Pickup
    We have 7-Way Pre-Wired Car Connector # 20023 that is 7 feet long. I have linked a video review of this product for you.
    view full answer...
  • Parts Needed To Install Brake Controller In 2007 Chevy Silverado
    In order to install the Draw-Tire Activator IV Brake Controller # 5504 in your 2007 Chevy Silverado (Classic body style) with the factory towing package, you will need to use the Tekonsha Plug-In Wiring Adapter for Brake Controllers # 3015-P . This adapter plugs into the port under your dash board that vehicles with the factory towing package come equipped with and makes for a quick and easy installation. If you have the 2007 Silverado with the new body style, you do not have a plug under...
    view full answer...
  • 7-Way and Brake Controller for 2005 Chevrolet Silverado
    We can help you with 7-way wiring and a brake controller for your 2005 Silverado. Your truck should already have wiring run for a 7-way; this is likely to be found tucked up above the spare tire. If you find blunt-cut wires there you will use part # PK11898. If you instead find a round U.S. Car connector then you will use part # 30955. Both of these options give you a 7-way socket on the vehicle. For a brake controller I recommend the highly-rated and easy-to-use Prodigy P2 # 90885. This...
    view full answer...
  • Installing Vehicle Side Trailer Connector to Trailer Deep Cycle Battery to Power 12V Interior Lights
    The Hopkins Endurance Quick-Install 7-Way Trailer Connector with Universal Pigtail Harness - Vehicle End # HM47210 can be connected directly to your trailer battery. You will run the Red wire to the positive terminal on your battery, but the white ground wire will connect to your trailer frame, just like the negative terminal of your battery does. You just want to make sure that connection to your frame is free of rust or corrosion for a bare metal to metal connection. That will give...
    view full answer...
  • Installing Brake Controller on 2001 GMC Sierra Without Factory 7-Way Trailer Connection
    The brake controller wiring for a 2001 GMC Sierra truck will utilize a wiring harness like # 3025-P. If you have a factory 7-way, there is no further wiring needed for that application as you can see in the attached video. If you do not have a factory 7-way, then you will need to use that wiring harness # 3025-P and also add a 7-way using # PK11898 if there is a bundle of wires above the spare tire. If there is a round plastic harness on the wires, then you will use the 7 way # 30955....
    view full answer...
    Image 1 for
  • Parts Needed to Match Goldwing Motorcycle and Trailer Wiring Together
    I recommend replacing both connectors with 7-Way Blade-Style connectors so they not only match with each other, but they also will match easier with other vehicles and trailers in the future. For your bike you need the part # PK11898 and then you need part # H20044 for your trailer. Just make sure the functions and pins all match and you'll be good to go!
    view full answer...
  • Recommended Trailer Connector To Use Curt Echo On a 2012 Chevy Silverado
    In order to install a 7-way on a 2012 Chevy Silverado you can use the Twist-in, 7-Pole, RV-Style Trailer Connector for Chevy and GMC Vehicles part # PK11916 if you have a US CAR Connector (see photo) or the Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness part # PK11898 if not. These will both then allow you to use the Curt Echo Mobile Trailer Brake Controller part # C51180.
    view full answer...
    Image 1 for
  • Trailer Hitch and Wiring Recommendations for a 2002 Chevy Silverado 1500HD
    If your 2002 Chevy Silverado 1500 has a roll pan bumper (which is basically the absence of a bumper) then yes, Curt trailer hitch # 13932, will fit. If your truck has the regular step bumper then you can use Curt trailer hitch # 13332 instead. I also recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow...
    view full answer...
  • Parts Needed to Convert From Hydraulic Drum to Electric Over Hydraulic on 2005 GMC Sierra 2500
    We can get you everything you need to go from hydraulic drum brakes to an electric over hydraulic set up for your trailer and 2005 GMC Sierra 2500. You'll need an EOH actuator, breakaway kit, and brake controller that is compatible with an EOH set up. First, for the actuator and breakaway kit you'll need the following: - Dexter DX Series Electric Over Hydraulic Brake Actuator for Drum Brakes # K71-650 - Bright Way Push-to-Test Trailer Breakaway Kit # 3802311 Then for the brake controller...
    view full answer...
  • Brake Controller for 2001 Chevrolet Silverado Without Factory Trailer Wiring
    For your 2001 Chevrolet Silverado you will only need a couple more parts. I have linked a video below of the installation process on your Silverado. In the video they are using the Universal Installation Kit # ETBC7 for the installation which you can choose to also use or stick with the Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness # PK11898. If you are using the Pollak connector you will need the Jacketed 2 Wire # 12-2-1 which is sold by the foot. Our installation...
    view full answer...
  • Replacement 7-Way for 2005 Beaver Patriot Thunder Motorhome Built on Roadmaster Chassis
    There is not a replacement 7-way wiring harness that is a custom fit for your 2005 Beaver Patriot Thunder that is built on a Roadmaster chassis; what you will need to do is replace it with a universal connector, the Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket # PK11898.
    view full answer...
  • Replacement 7-Way for a 2002 Ford F-350, 450, and 550 Cab and Chassis
    The pin locations for the Curt T-Connector # C55243 are different from your connector because the 55243 fits a 1999 - 2001 Ford F-250 and F-350 Super Duty with factory 4-flat. Since you input your vehicle info as a 2002 Ford F-350, 450, and 550 Cab and Chassis the only replacement options we have look like the Curt # C55774 which plugs into the US Car Connector which would be on the other end of your wiring harness. If just the 7-Way on your vehicle is needing to be replaced then the 55774...
    view full answer...
  • Hitch and Brake Controller for 2000 GMC Sierra 3500 Pickup
    The 2000 model year was a split year for GMC pickups so checking hitch fits can be tricky. Curt Class V hitch # C15400 fits only the cab-and-chassis versions from 2001 forward; it does not fit your 2000 GMC Sierra 3500 pickup. If your 2000 Sierra pickup has a 10-inch deep-drop bumper you can use Curt Class V hitch # C15317. If it has a standard or step bumper you can use Class V hitch # C15325. If your Sierra has a factory 7-way you can install a trailer brake controller like the Prodigy...
    view full answer...
  • Troubleshooting Trailer Brakes that Engage when Headlights are Turned On, 2000 Chevy Silverado
    It sounds to me like you may have a brake controller wiring harness that is pinned out improperly. Check out the pins in the port under your dash with a circuit tester, item # PTW2993 if needed. The middle right pin should be hot at all times, the bottom right pin should go hot when the brakes are pressed the top right pin is the trailer brake feed circuit and the bottom left pin will be the ground wire. Now looking at your brake controller connector as if you were ready to plug it in...
    view full answer...
  • What is Needed to Install Curt Venturer Brake Controller in 2007 GMC Sierra New Body?
    If you have the factory 7-way on your 2007 GMC Sierra New Body you can install the Curt Venturer Trailer Brake Controller # C74VV with just the Universal Wiring Adapter for Curt Trailer Brake Controllers # C51515. Should your truck not have a factory 7-way you will still need the adapter, but you will also need to add Connector # PK11898 or, if your Sierra has a round plug with a cap instead of a bundle of wires above the spare tire, use part # 30955 instead. There is going to be a bundle...
    view full answer...
  • Locating Stop Light Switch on 1999 Chevy Silverado to Install Trailer Brake Controller
    Based on my research, it appears the correct brake light switch wire at the brake pedal on your 1999 Chevy Silverado should be white in color. However, I still recommend testing the wires on your truck with a circuit tester like # PTW2993 to ensure that this is correct. You are looking for the wire that only receives power when the brake pedal is depressed and no power during any other function. For your 1999 Chevy Silverado 1500, we do also have a Plug-In Adapter with part # 3025-P that...
    view full answer...
  • Recommended Wiring And Brake Controller For 2002 Chevy Silverado 1500
    Your 2002 Chevy Silverado came wired with a factory 7-way so I recommend you use the Replacement Multi-Tow 7-Way & 4 Pole Trailer Connector # 74682. If that wiring connector isn't present, then I recommend hardwiring the plug using the Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket # PK11898. I've attached an article to help you with this wiring, but you will simply splice into the present wiring based on function. Then to adapt to your camper's...
    view full answer...
  • How To Wire a 7-Way Trailer Connector On a 2000 Chevy Silverado
    The 2000 Chevrolet Silverado's all come with some sort of factory trailer wiring under the rear bumper that you can attach a trailer connector to. There are models with simply blunt cut wires and in which case you would need the Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket part # PK11898. There are also models that already have a plug you can attach a trailer connector to and there is no hard wiring required and in which case you'd simply use the...
    view full answer...


< Previous
123. . .6



Do you have a question about this Trailer Wiring?


Info for this part was:

Employee Tyler C
Written by:
Tyler C
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video by:
Kathleen M
Employee Aidan B
Video by:
Aidan B
Employee Shane T
Test Fit:
Shane T
Employee Robert C
Test Fit:
Robert C
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.