B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
(3569 reviews)
Price: $599.00
In Stock
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Item # BWGNRK1108
Retail:$619.00
Our Price: $599.00
You Save: $20.00
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (3569)
- Q & A (0)
- Photos
2006 Ford F-350 Super Duty - B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- B and W
- Removable Ball - Stores in Hitch
- Below the Bed
- Wheel Well Release
- Manual Ball Removal
- 2-5/16 Hitch Ball
Install this heavy-duty hitch on your so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.
Features:
- Heavy-duty underbed hitch lets you tow your gooseneck trailer
- Complete truck bed access when you're not towing
- Remove ball from hitch, flip it upside down, and drop it back into hitch for storage
- 5/8" Thick, spring-loaded, steel locking pin on end of handle goes all the way through ball to secure it in place
- Access handle at rear driver's-side wheel well
- Single-piece, machined ball socket provides rugged durability
- Square ball base prevents ball from turning in hitch during hookup
- "Corners only" fit of stowed ball prevents grime buildup inside of hitch
- Specially designed accessories (sold separately) make it easy to customize the hitch to fit your needs
- Tow a 5th-wheel trailer with the B&W Companion hitch adapter
- Spring-loaded safety-chain hookups are built in
- Simple installation with included custom mounting kit
- No welding required
- Truck bed does not have to be removed
- 4" Diameter hole must be cut into bed
- Powder coated steel is sturdy and corrosion resistant
- Made in the USA
Specs:
- Gross towing weight: 30,000 lbs
- Vertical load limit: 7,500 lbs
- Ball size: 2-5/16"
- Limited lifetime warranty
With the B&W Turnoverball underbed gooseneck trailer hitch you get the best of both worlds. When you go to tow, the Turnoverball creates a sturdy, dependable connection with your gooseneck trailer. And when you're done towing, you can stow the ball upside down in the hitch to get full bed access and a clean appearance.
Easy-to-Remove, Simple-to-Store Hitch Ball
The durable steel hitch ball included with the Turnoverball system secures in the hitch with a sturdy, 5/8" thick steel pin that is incorporated into the end of the operating handle. To lock the ball in place, drop it into the hitch hole in the bed of your truck. Then rotate the handle in your driver's-side wheel well counterclockwise until the latch engages. When the latch is engaged, the spring-loaded pin on the end of the handle will be inserted all the way through the base of the hitch ball, forming a strong, solid connection and ensuring absolute security when you're towing.
When you're done towing, remove the hitch ball by simply pulling the handle out as far as it will go and then rotating it clockwise until it unlatches. Remove the ball, flip it upside down, and drop it back into the ball hole of the hitch. Then reengage the latch to secure the stowed ball in place.
Unlike typical gooseneck balls - which have round bases - the Turnoverball hitch ball is designed with a square base. This makes latching the ball in the hitch easier because the base won't rotate inside of the hitch like a round base might, so lining the pin up is a snap. The base of the ball also fits tightly within the ball hole during storage. Because only the corners of the base contact the sides of the socket, any dirt or grime that gets into the hitch will fall through the socket, thus helping to prevent any buildup that could cause the ball to seize up in the hitch.
Simple, Custom Installation
This hitch is custom designed for your vehicle. The included mounting brackets bolt to existing holes in your truck's frame. While some modification is required - you will need to cut a 4" diameter hole in your bed for the hitch ball and drill holes for the built-in safety chain loops - there is no need to weld onto or to drill into your frame.
Once you have the hitch brackets and body installed, set up the operating handle. This handle is designed to be accessed from the rear driver's-side wheel well. On the end of the handle is the heavy-duty steel pin that secures the hitch ball.
B&W Turnoverball Gooseneck Hitch Accessories
B&W makes it easy to tow just about anything. With the many adapters and accessories available, the Turnoverball can be made to work with almost any gooseneck trailer. Hitch balls are available that have a built-in rise, an offset, and even a different connection type. Add on the Companion fifth-wheel hitch - which attaches directly to the Turnoverball with no other parts required - and you can tow your fifth-wheel trailer.
GNRC800 B and W Turn Over Ball Under-Bed Gooseneck Trailer Hitch - 30,000 lbs
GNRM1108 B and W Turn Over Ball Gooseneck Custom Installation Kit
Installation Details
Tech Tip
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
California residents: click here
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- etrailer mistake
Customer Reviews
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs - BWGNRK1108
Average Customer Rating: 4.8 out of 5 stars (3567 Customer Reviews)
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.by: Greg04/09/2022
2002 Ford F-350 Super Duty
Great service and a great product! Quick delivery and good communication regarding status. Of course it’s a great hitch, it’s a B&W…
by: Brian05/07/2023
Difficult to determine installation ease, as I had the bed off my truck while installing. That made it very easy, but instructions were good and its a straightforward process. Very well made, and fit precisely on my truck. I think the B&W system is very tough to beat. Solid and dependable. And their after sale customer service is excellent.
by: Norman 03/09/2023
Quickly shipped. Easy to install. Did the install by myself in about 3.5 hours without a lift. I do have an older truck so I didn’t have to lower the exhaust or notch anything to install.
Norman
3/10/2024
Product is durable and easy to use. Highly recomended.
by: Michael10/04/2023
Love B&W products! One minor complaint is packaging could be more robust. Package arrived having been broken open and retaped by carrier. Fortunately, all the parts were there.
by: Donald 01/25/2024
B & W builds high quality products,this is my second turn over ball hitch because the first one worked so well. Etrailer is my go to supplier. They know what they are doing. I ordered this hitch and it arrived the next day.Wow!
Thanks etrailer you are the best!
by: Tim 03/08/2024
I am extremely happy with the hitch and the install was very quick and professional I will definitely be back for my next truck
by: Nicolas04/14/2020
ETrailer was really helpful when I called them with a question. Was installing pretty easy but since I have a older truck bed wasn’t exactly straight so put 2x4 under floor jack and was able to raise it enough to install my rails underneath without it hitting shock like it was first doing. Took few hours but looks good. Haven’t used it so can’t give a rating for how well it actually tows heavy loads. I plan on towing my gooseneck trailer with tractor which should be around 25k pounds.
Nicolas
4/15/2021
Works great, I have no complaints. Will buy again for any other truck I have that needs one.
by: Brian 08/22/2022
Good heavy built piece of equipment, but not too crazy about how it's mounted to my truck. Would love to discuss the design with your engineer, especially when the bed is removed or lifted off of the frame to install. Other than design, I'm happy with it.
Brian B.
8/23/2023
The under bed hitch is doing exactly what I want it to do. The handle for te pin is garbage need to be a T shape to keep a good grip on it. Should have put a grease hole and fitting at the pin for lubrication because it can have a tendency to stick. Like I said at purchase, it is well built.
by: Lewis07/09/2022
Luckily I had a friend with a vehicle lift and it only took two hours from start to finish. Fairly easy instructions to follow, no modifications were needed. I recommend this hitch and would definitely install it in another truck. Construction of the hitch was top notch.
Lewis
7/13/2023
Totally fine, no issues at all.
by: Donald 12/04/2023
The product was a perfect fit - no drilling required. By the way, Chole C was very helpful in the ordering selection process.
by: Larry G07/13/2017
2009 Ford F-250 and F-350 Super Duty
It took me a while to get this hitch installed because there were after market airbag suspension supports that were in the way. After I removed them the installation went a bit smoother. The B&W instructions were so light, I was glad to had the opportunity to view the etrailer.com resource video and other helpful informaiton in determining the rear airbag support could be removed without causing a structural issue to the truck.
So if you got these airbags install, know that they can be removed so you can take advantage of this high quality hitching system. I used impact wrenches to loosen the old and install the new bolts... made life a lot easier than with the standard wrenches, so worth the price i invested in the right tools for the job.
by: Steve09/28/2023
Like all B&W products, this hitch installed easily and functioned as designed!
by: Mike01/02/2020
Suprised how quickly again etrailer was on shipping out!
Holiday week and the they had it on its way the day I ordered it.
I always have had great success with etrailer.
Simple to install hitch with the directions and online video instructions.
Hardest part was drilling the 4" hole in the floor of the bed. Again the video had excellent tips to aide with that.
We were really surprised how quickly it was to install.
Absolutely love the quick way the ball flips over to remove it out of the way for the use of the truck bed.
Only thing I would do different, order the rubber cover for the bottom of the ball to keep debris out of the hitch while inverted.
Going to place an order for one now from etrailer!
by: Ernest07/10/2023
1999 Ford F-350 Super Duty
Excellent heavy duty construction and fit. Would have got 5 stars but was missing several 3/4 bolts, nuts and washers, had to go to town and buy some to finish
Rebecca N.
7/13/2023
It is ok to replace the hardware as long as you are using grade 5 or grade 8 hardware. Still it should not have been missing anything. I will have our Customer Service team reach out to you.
by: Jim C.12/08/2014
2006 Ford F-250 Super Duty
I purchased the B & W turnover ball hitch from E Trailer for my 2006 Ford F250 SuperDuty. Jan in customer service was very helpful. I received the hitch within 2 days. My wife and I installed it according to the instructions and installation video on their website. E trailer really did their homework on the installation of their hitches. We got the hitch insatlled with minimal problems. All you have to do is follow the video/instuctions. I am very pleased with the hitch and would recommend ETrailer and the B&W hitch to anyone who tows. I tow a 5th wheel with a Ranch Hitch Gooseneck adapter. Now I dont have to deal with the 5th wheel hitch in the bed of my truck. I will continue to purchase other towing accessories from ETrailer. A wonderful experience.
by: Ambyr11/09/2022
Easy to instal and has been great this past year!! Still looks and acts brand new. Shipping was quick and customer service was amazing!
Ambyr
11/10/2023
I use my hitch at least 4-6times a week and it works amazing! 1010 product! Still super easy to reverse when I’m not using it and vise versa.
Mike L.
11/16/2023
@Ambyr We're glad it's working well for you!
by: Daniel 01/27/2024
The hitch was exactly as the description stated . Fit perfectly in truck and works great . It’s being used 2-3 days a week since installed a year ago . Thanks
by: Philip 08/25/2023
Fairly easy to install with no experience and I like the quality of the hitch. So far so good.
by: David R in Shelbyville, Tn07/13/2017
2012 Ford Transit Connect
This was my Second Hitch to order from etrailer. The first was on my 2012 Ford Transit Connect. This time was on my newly purchased 2008 Ford F250 Super Duty Diesel truck. It did not have the Goosneck Hitch and I have Horses and use a Trailer to transport them. Instead of paying Much More to have the hitch put in, I elected to do it myself. I looked at the Video and read the instructions Twice before starting. Since I am almost 75, I need the help of my son. While he was at work, I did most of the work myself. When he got off work, we finished the job. I will continue to purchase from etrailer. The items fit Perfectly and instructions are Great. In the picture, is Sophie, my dog which watched as we worked.
by: Nate 02/05/2024
Great product have had many of them over the years!
by: Douglas03/18/2024
Really nice set up, easy to install just follow the directions. No surprises and shipping was a day early
by: Randell 03/31/2023
The hitch installation was extremely easy for my truck, because I had the bed off of it for replacement anyway. The hitch is very easy to use and works great. The only issue I had was the safety chain bolts. The originals were rounded and not squared off to sit in the bed properly. I called B&W and they sent a new set that fit as they are intended. Would definitely recommend this hitch to anyone needing to add a gooseneck hitch to their truck.
by: Jack07/07/2023
Great product received quickly easy install.I have installed on several different trucks and never had an issue .We tow from 5 to 25 thousand pounds.Gret install instructions
by: Chris05/07/2023
Super fast shipping, and great purchasing support. While it was a challenge to install only because my truck had an airbag system that had to be removed first (it didn't work anymore and was welded to the frame) The hitch installed effortlessly in about an hour. This hitch has to be my favorite of the hitch systems, its simple but ery effective at doing its job with great additional features!
by: Brian 07/25/2023
instructions were sufficient, product is in use with no problems to date.
25
3546
Show More Reviews
See what our Experts say about this B and W Gooseneck Hitch
- How to Install a Companion Fifth Wheel Hitch on a Flat Bed TruckSince you have a flatbed on your truck now the only recommended way to use a Companion hitch will be to first use the # BWGNRK1500 as a gooseneck hitch and then for a fifth wheel hitch you would need the # BWRVK3050. The # BWGNRK1108 that you had previously installed on your truck is not compatible with flatbed trucks so there would be no recommended way for you to use it.
view full answer... - Which Air Bag Helper Springs Fit a 2002 Ford F-250 With B&W Turnover Ball GNRK1108 Gooseneck Hitch?You will need to use the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88291 on your 2002 Ford F-250. This kit is specifically designed to work with the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1108 you have. I recommend adding the Air Lift WirelessAIR Compressor System # AL58WQ when you add the air springs. This compressor has a smart manifold which allows you to control the air pressure in each spring from your smartphone using the Air Lift app. This means...
view full answer... - Underbed Mounting Kit for 5th Wheel Towing with a 2008 Ford F-250 Super DutyThe underbed mount system I recommend for your 2008 Ford F-250 Super Duty is the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1108. You can use this for towing a gooseneck trailer or you can use the Fixed # BWRVK3500 or Sliding # BWRVK3400 Companion 5th wheel hitch to tow a 5th wheel trailer. Reese is the company that makes the OEM puck system for the Ford trucks and unfortunately it doesn't look like they have a fit listed for your truck. If you...
view full answer...
- Curt X5 Adapter Recommendation for a B and W Gooseneck Hitch to Allow Fifth Wheel Hitch InstallSince you said you have a square shank gooseneck hitch installed in the bed of your 2006 Ford F-350 there is a very strong chance it is a B and W gooseneck hitch part # BWGNRK1108 and the Curt X5 adapter part # 16310 would fit it and work well as an adapter for you to use with your Reese fifth wheel hitch. What you will want to do is get underneath your truck to see if you can find anything that would identify your gooseneck hitch. If it is a B and W hitch there should be a sticker on...
view full answer...
- Would a B&W Hitch that Fits on a 2008 Ford F-250 Super Duty Fit on a 2016 Ford F-250?The brackets that mount on the frame rails of the 2008 Ford F-250 Super Duty B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs item # BWGNRK1108 look completely different than the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs item # BWGNRK1111 which fits the 2016 Ford F-250 Super Duty. The B&W Installation Kit item # BWGNRK1108 would not fit on a 2016 Ford F-250 Super Duty without the B&W Turnoverball Gooseneck...
view full answer... - How Can I Pull a Fifth Wheel Trailer with My Gooseneck Trailer HitchYou are correct that the best route is to use the B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3500 with the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1108. There isn't a way to convert your fold down to a turnover and I definitely don't recommend trying to modify your current hitch. The frame brackets and hitch head will have to completely swapped out. You also mentioned changing your pin box to a Goose Box. This is could be a great option if you...
view full answer... - Are There AirLift Air Bags Compatible with B&W Turnoverball 1108 on 2006 Ford F-350I have a solution for you, but there are not AirLift airbags available that will work with your B&W Turnoverball # BWGNRK1108 system on a 2006 Ford F-350. However, there is the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2400 which are similar to the AirLift bags and will give you an air bag system that's compatible with your Turnoverball's brackets. If you also need a compressor system to keep the bags aired up then you can use the Firestone Air Command...
view full answer... - What is the DIfference in The B&W Goosenecks Part # BWGNRK1111 and BWGNRK1108The difference in the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit part # BWGNRK1108 and part # BWGNRK1111 is what vehicles they fit. Part # BWGNRK1108 is designed for the 1999-2010 Ford F-250, F-350 and F-450's and part # BWGNRK1111 is designed for the 2011-2016 Ford F-250, F-350 and F-450's without the OEM Prep Package. Both are designed with the same center section and can be paired with the B&W companion Fifth Wheel with part # BWGNRK1108-5W and part...
view full answer... - Recommendation for a Gooseneck Hitch on 2002 Ford F350 4x4 Long BedAccording to B&W, on gas trucks the exhaust will not cause any clearance issues. On models with Diesel engines, in some cases the muffler might need to be moved slightly to clear the hitch. There is an bracket included with the hardware kit that is used to relocate the muffler if needed. The installation instructions make no mention of the need to relocate a brake line, they just mention that they want to be aware of where they are to make sure you don't damage them when positioning the...
view full answer... - Recommended Air Bags for 2005 Ford Super Duty F-250 or F-350 with B&W Gooseneck HitchI have a solution for you, but the # AL57396 are not a fit on a 2005 Ford F-250 or F-350 Super Duty truck. However, the Firestone Ride-Rite # F2400 are a confirmed fit on both the 2005 F-250 and F-350 and will fit with a B&W Gooseneck hitch system # BWGNRK1108. This Firestone kit gives you a durable air bag system that will help keep your truck level when you're gooseneck towing. If you also would like a compressor system to allow for on-the-fly inflation of the bags, I recommend using...
view full answer... - Placement of Gooseneck Ball with B&W Hitch BWGNRK1108 Installed in 2000 Ford F-250 8-Foot BedIn your 2000 Ford F-250 with 8-foot bed the B&W Gooseneck Hitch # BWGNRK1108 will install with the center of the ball positioned 47-inches from the rear edge of the bed. For this gooseneck hitch there is no front-to-back adjustment; it can only mount in this location.
view full answer... - Can I Put A B&W Turnover Ball In My 2019 F-350 With The Factory Puck System?No, you would not be able to install an aftermarket gooseneck hitch like the # BWGNRK1108 on a truck that already has the factory puck system. Parts of the puck system would obstruct both the frame brackets and crossmembers of the gooseneck hitch. The puck system would have to be completely removed, which in my opinion is not a logical thing to do and would be way more trouble than it is worth. If the factory puck system has a gooseneck ball spot already you can just drop in the B&W gooseneck...
view full answer... - Weight Capacity of B and W Turnoverball 1105RThe 1105R is no longer made but the kit that replaced it was the # BWGNRK1108 which has a 30k weight capacity. The 1105R has the same capacity.
view full answer... - Will B&W Turnoverball Gooseneck Be Compatible Between 2008 Dodge 2500 And 2008 Ford F-350?I reached out to B&W and there are no components of the 2008 Dodge 2500 Hitch # BWGNRK1313 that are compatible with the 2008 Ford F-350. It isn't even something you can switch brakets out on. You will need to get the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1108 for your 2008 Ford F-350. I also recommend getting the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug # 41157 for the bed of your truck....
view full answer... - Does Rubber Mat in Truck Bed Need to be Trimmed to Install Fifth Wheel Rail KitFifth wheel rails need to make a direct connection to the bed of the truck they install on. If you plan to use a rubber bed mat you'd have to make a cut out for the rail system you install. The rail kit needed for the B and W Companion hitch part # BWRVK3500 you mentioned in the bed of your 2004 Ford Super Duty long bed would be the # BWGNRK1108 which would require a smaller cut out for the rail kit since it uses a gooseneck ball attachment but would require cut outs made for the hitch...
view full answer... - Will Air Lift Springs # AL88390 Fit With Gooseneck Hitch On a 2001 Ford F-250 Super Duty? Yes, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88390 will fit with a gooseneck trailer hitch like the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1108 on your 2001 Ford F-250. You will use the large bolt included with the B&W hitch to secure both points on the bolt through the frame. This is addressed on page 5 of the installation instruction for the Air Lift springs linked below. The Air Lift WirelessAIR Compressor System # AL58WQ is the on board compressor...
view full answer... - Adapter Needed to Carry 5th Wheel Hitch with a 2003 Ford F-350 8 foot Bed with a B&W Gooseneck HitchI do have a solution for you to carry a 5th wheel hitch that fits standard above bed base rails with the B&W Gooseneck Hitch # BWGNRK1108 installed on your 2003 Ford F-350 with an 8 foot bed. I believe that the 5th wheel hitch from B&W that you were referring to was the Patriot, like part # BWRVK3200 or part # BWRVK3255, as opposed to the B&W Companion, like part # BWRVK3500, which was built to install directly into a B&W Gooseneck Hitch. If the B&W hitch that your Dad owns fits into standard...
view full answer... - Difference Between B&W BWGNRK1108 and BWGNRK1108-5W Turnover Ball Gooseneck HitchThere is no difference between the two. We have two similar but different part numbers because we market the # BWGNRK1108 as a gooseneck hitch and the # BWGNRK1108-5W as the mount for the # BWRVK3400 sliding version of the B&W Companion 5th wheel hitch for short bed trucks or # BWRVK3500 for long bed trucks. Both The BWGNRK1108 and The BWRVK3500 are needed and confirmed to fit your 2005 Ford F-350 Super Duty. The Companion hitch is a good choice because of its immense jaws, cushioned bushings,...
view full answer... - Comparison of B&W BWGNRK1108-5k Rail Kit and BWGNRK1108 Turnover Ball Gooseneck HitchThere is no difference between the two parts you mentioned, # BWGNRK1108 and # BWGNRK1108-5K. We use two different part numbers because we're marketing one as a Turnover Ball gooseneck hitch, and the other as an underbed rail kit for the B&W Companion 5th Wheel Hitch, such as part # BWRVK3400-5W. I've linked you some helpful videos.
view full answer... - Recommended Replacement Gooseneck Hitch For 2008 Ford F-250 Super DutyThank you very much for your question, I just need a few more details to make sure I can try to accurately answer your question. Do you have a 6 3/4bed or a 8 foot bed? Do you have a 2008 F-350 Super Duty? or a F-350 Cab and Chassis? Is it possible to fine the make and model on your gooseneck? If not I have links attached that show all the available products that fit a 2008 Ford F-250 and F-350 Super Duty 6 3/4 and 8 foot bed. Let me know which one looks familiar.
view full answer...
- Adapter to Tow a Fifth Wheel Trailer with a B&W Gooseneck Turnoverball HitchThe Curt X5 Adapter # 16310 is designed to work with your B&W Gooseneck # BWGNRK1108. It will also provide you with the industry standard rails needed for the Curt E16 Fifth Wheel Hitch # 16516. This will give you up to 12 inches of travel for turning clearance so you don't hit your truck with your trailer anymore. Another option is the B&W Companion Fifth Wheel Hitch # BWRVK3400 that fits right into the Turnoverball gooseneck. This will also give you 12 inches for turn clearance. ...
view full answer... - Will the B&W Turnoverball Underbed Hitch #BWGNRK1067 Fit My 1999 Ford F-350 Super Duty?The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs, # BWGNRK1108, is the right fit for the 1999 Ford F-350 Super Duty with either an 8 foot or 6-3/4 foot bed. The B&W Turnoverball, # BWGNRK1067, unfortunately is not a fit for your vehicle. I'm sorry to be the bearer of bad news since you've already purchased this one, but I do want to make sure you get the right fit for your vehicle.
view full answer... - Can a Lifted 2003 Ford F-250 Short Bed Truck Tow a Gooseneck TrailerFirst you have to look at what kind of lift you have on the 2003 Ford F-350. If it is a body lift, where the truck bed has been moved further from the frame then you will not be able to install a custom gooseneck hitch and would need to have something fabricated. If it is a suspension lift where the body and truck bed are still the same distance apart as stock then you can install a gooseneck hitch. But please note that often times a lift kit will make the capacity of the truck unknown. The...
view full answer... - Recommended Air Helper Springs For 2007 Ford F-350 2WD 8' Bed W/ B&W Turnoverball Gooseneck HitchFor your 2007 Ford F-350 2WD 8' Bed with the B&W Gooseneck Hitch and B&W Companion I recommend the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2398 which will fit with your gooseneck hitch. The # F2398 has a 5000lb load leveling capacity making it a perfect option for carrying a heavy payload, or towing a trailer. To keep from having to manually inflate the helper springs each time you tow a trailer or carry a heavy payload I recommend adding an on-board...
view full answer...
Do you have a question about this Gooseneck Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Shane T
Test Fit:
Joe B
Test Fit:
David F
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Written by:
Lindsey S
Installed by:
Jeff D
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Noah M
Video by:
Alan C
Video by:
Sue W
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Greg
4/11/2023
I am enjoying my B&W turnover hitch very much after a year of owning it. B&W has the friendliest, most helpful customer service as well. I’ll be using their products for years to come. You can’t beat their quality and customer service!