Are the holes you are referring to threaded? If so then you could drill a 1/4" hole into one of our pads (see below) and then use a bolt to attach them to the wall. If the holes are not threaded then it may just be best to use a few…

Hi Kat, The rubber bumpers that we offer are all 96" in length but can come in different widths. Based on the dimensions you provided i your pictures the #D3-96 is going to be the best fit, but you will have to cut it down to size.

A 3/8" self tapping screw seems a bit large for the Horse Trailer Side Pads #HTP1260BK but I do recommend always using a washer like the 3/8" #01292006-020-01. This will help spread out the surface area which means the pad is less…

Currently the Curt Echo Trailer Brake Controller #C51180 will not work with Android Auto on your vehicle dash. So while you will be able to use it on your android phone it will not interfere with you using the OneControl app while connected to…

The closest we have to match those measurements is going to be the H-Channel for Enclosed Trailer #36281-955 which has an internal width of 1.027" and a height of 2". We do also have a C-Channel #362213-955 which has an inside…

For a 10 lb gas strut we only have the Taylor Made Marine Gas Strut for Boat Hatches #3691835-10 which is only 20" long. Seeing as though you'd prefer a 23" long strut, the best we can offer is the Taylor Made Marine Gas Strut for Boat…

They are different in width. Aside from that and price everything else is the same. The Horse Trailer Side Pad item #HTP1260BK measures 60" long x 12" wide x 2" thick. The Horse Trailer Side Pad item #HTP60BK measures 60" long x…

The bumper part #D3-96 that you referenced is our best option and could work for you but you will need to make some modifications. You would need to cut it down to the 84 inch length you need and would also need to drill new holes in it that line up…

For the installation of your 60-inch horse trailer side pads, I recommend using the Trailer Horse Pad Screw #PS-8. The pads are installed in the trailer directly via the screws and can be mounted wherever is convenient. I have included a photo from…

Generally speaking, the hub face measurements will be around 15" longer than the spring center measurement. That said, this can vary based on multiple different factors such as tire size, offset, etc. The most common options we offer are the…

The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.

On your Curt TriFlex Trailer Brake Controller #C24VV, the decimal point as you put it is standby mode with no trailer connected. The blank screen is also standby mode and that screen is what is seen when simply starting the vehicle, but that screen…