I sent an email to verify the correct trailer plug for my Sub and they responded in a timely manner. Made the purchase and it fit perfectly!1728268

Just what we were looking for! The 2007 Chevy truck needed a replacement connector and this did the job!1723219

I twisted this connector into the stock location and the locking tab that keeps it from twisting back out broke off. I locked it into place with a screw so it won’t twist out. Disappointed that it broke so easily .1690854

Broke my trailer electrical socket on my GMC pickup, I’m 1,500 miles from home waiting for the snow to start melting to go home. The local GM dealer wanted over $70.00 for replacement part. Found this one at etrailer.com for $16.95. I had it sent priority mail as mail has been slow here in AZ , received in six day and took less than five minutes to install. Hate to leave AZ , but home in SD is calling. We will be be back next winter. Thanks to etrailer for saveing me money I’ll need for gas home.612121

Click to Enlarge

Fits perfectly and works as intended 1722971

Very easy...Installed in about 10 seconds. Product did not completely cover the holes through the bumper that existed from the factory harness insert. So you can see light a little bit of light around the product.14933

Click to Enlarge

This connector arrived fast and was very easy to install. Took about two minutes to put in. It seems to be of very good quality. 782080

Click to Enlarge

Click to Enlarge

Click to Enlarge

Perfect fit for my 2008 Silverado. Identical to the adapter used in my wife's 2007 Suburban, except hers says "GM" and mine says "Pollack." This is all assuming it works, I haven't hooked a trailer up to it yet.11806

Click to Enlarge

Click to Enlarge

Looks to be good quality. Easy to install.

Remove the old connector by depressing the keeper, turning it counter clock wise about a quarter turn, slide it out, depress the keeper on the wiring harness connector and unpluging the unit. Install the new connector by pluging in the wiring harness connector, sliding the unit through the bumper hole and turning it about a quarter turn clock wise to lock it in place. It took less time than writing this.89755

Leon

7/17/2014

After a year, I still believe this product is well made of high quallity products. It is operating well as I expected it would. Thank you for building and selling this product.

by: Matt Q09/06/2023

Fast shipping, superior product, I would definitely buy again!1661977

Old electric plug in on my 2007 Chevy 2500 was worn out. Cord from RV would not stay plugged in. Went on line on E-Trailer, ordered a new part for GM vehicles, when it arrived, it took me about five minutes or lees to remove the plug all I needed was a small regular blade screwdriver. New part woks fine. This is the 2nd or 3rd time I have ordered from E-Trailer. I have always been satisfied. Thank you Ken Hill231504

Kenneth H.

11/5/2016

Still working great

Works perfect just like GM specs....fast shipping 132356

Click to Enlarge

Duncan

11/14/2014

This looks like my GMC 2006 connector. What is the year of your truck. The spec says it is for 2007 and up.

Victor

11/14/2014

I have a 07 Chevy Avalanche

Fit no issues tight and quality. Spot on. 2011 gmc 2500hd fit right in the factory light plug in. Those that don’t have the 7 way connector already in it this adapts.1233232

by: Danny05/22/2022

Took five minutes to install. Works gr eat.1300982

Danny

5/23/2023

Works great. Was a snap to install

Replaces plug with broken cover tab. Old plug matches photo. Correct model year replacement not exact duplicate but fits cutout and wire harness. Average price. Very fair shipping fee. 296713

Arp

9/20/2017

Looks good, fits good, works fine.

Worked out great just want I needed.
When I called was very helpful and understood what I was looking for1660472

by: Joel 08/27/2018

After 18 years, my original trailer plug connector was showing signs of corrosion. When I bought a travel trailer with electric brakes, I knew I could no longer trust my old connector. I purchased this replacement because it is identical to the OEM connector which I knew was excellent quality, not a cheap knock-off. It was simple to install and the wire connector plugged right in. I've been using it extensively for a year now and it's been working flawlessly. I'm glad I purchased this quality connector that I can trust.558817

Trailer parts arrived quickly, were well packaged & fit exactly. Etrailer.com will be my first call for additional trailering needs.339206

Rc

2/2/2018

works well, no problems, fast delivery

After spending a little time online figuring out how this connector attaches to the factory hitch (push the tab, twist about 1/4 turn, pull out far enough to reach wiring harness connector), I ordered one from etrailer. When I got it, it took me all of 5 minutes to remove the broken connector and install the new one. Upon examining the OEM connector, which says "GM" on the lid's outside, it says "Pollak" on the inside, so the OEM part was built by this aftermarket company. No wonder it fit so well! BTW, the original broke because of cockpit error, not because of manufacturing defect.128958

This little marvel was a piece o' cake to install. Less than 10 minutes from taking it out of the box to installing in the bumper of my Chevy and wiping my hands on my pants. If my nosy and talkative neighbor wouldn't have been staring over my shoulder, it would have been installed in under 5 minutes.127695

Mike B.

4/29/2015

Working fine.

Mike B.

5/5/2015

No issues to report, the unit is working fine.

Looks like OEM and took all of a minute or two to install. The video was very helpful to show how to remove plate on back of rear bumper. The wiring harness on my 2012 Silverado wasn place so it was only a matter of removing plate and plugging in. A seven point adapter then plugs into this and the trailer plug just pushes onto the adapter. I tried both a seven point adapter that I kept from my 2005 Silverado and also a seven point adapter that my brother has on a 2011 Honda Pilot and they are all universal and worked just fine.. Very user friendly.The tow hitch took about 45 minutes to also install with no help (though a second person could make it a 30 minute ordeal tops). Very pleased and the shipping was ahead of original date with just normal ground freight.. 47314

REPLACED OEM PART PERFECTLY. TWISTED OUT THE OLD ONE AND REPLACED IT WITH THE NEW ONE, PLUGGED IN THE HARNESS AND WAS GOOD TO GO. 214066

Wally

8/5/2016

They are all still performing well.

by: Chuck K.01/04/2017

2007 GMC Sierra Classic

Exact fit and works great. I couldn't give it a 5 because it rotates slightly in the mount which doesn't seem to affect it's function, but the old factory part that it replaced didn't do that.329819

Chuck K.

1/4/2018

Have had no problems with it.

used this plug to replace the factory "filler". this item is well built, excellent spring, just what i needed to keep the 7 way option (used with a four way trailer harness). breeze to install and fits snugger than the factory one (2008 silverado). would recommend and first time ordering with etrailer...will do business again, great products to fit any situation, outstanding service and prices. videos are great too. look no further than this company. shipping was fast. A++++ all the way around. good job guys.75414

The manufacturer (Pollak) directed me to etrailer where I easily located the correct trailer connector. Apparently my 2004 Nissan
Titan was retrofitted at the dealer with this style connector. I bought the vehicle new. The dealer's parts department had no information for this part or the hitch.
Your website was easy to navigate and the pictures simplified the process. Replacing the broken original was a five minute job. The new connector fit perfectly. I wish all repairs were as easy. 65118