You will need the Taylor Made Mooring Buoy Rod # TM65GR for your Taylor Made Sur-Moor T3C Mooring Buoy with Center Tube - 24" Diameter # 36946374. view full answer...
The blue line of the Taylor Made Sur-Moor Mooring Buoy with Center Tube and Recessed Top # 36946372 is to indicate that it is an anchor buoy and does not indicate a load of any type. This is an 18 inch diameter buoy with a 100 lbs of buoyancy. For a similar buoy with 60 lbs instead we have the part # 36946371 which is 15 inches in diameter. view full answer...
The Taylor Made Sur-Moor T3C Mooring Buoy with Center Tube # 36946372 is made of polyethylene which is considered a softer but durable plastic. I want to say it would hold up well to being stabbed but it's unfortunately never been tested for that. I hope you catch the buoy stabber though. view full answer...
The blue stripe of the Taylor Made Sur-Moor T3C Mooring Buoy with Center Tube # 36946374 is to indicate that it is an anchor buoy and does not indicate a load of any type. You'd still be able to see the blue stripe if it was loaded with 240 lbs. view full answer...
The # 36922171 Taylor Made Sur-Moor Traditional Mooring Buoy does include the galvanized center rod with the attachment point on one end and a swivel on the other.
I've linked to a product description video that you might find helpful. view full answer...
I reached out to Taylor Made who informed me that you will want to use a chain that weighs 50% of the buoyancy rating for the Taylor Made Sur-Moor Traditional Mooring Buoy # 36922174. Since this buoy has a buoyancy rating of 240lbs you will want to use a chain that weighs 120lbs. I have added a diagram from Taylor Made that will show the recommended anchoring with the light chain being the chain with the 120lbs weight rating.
The length will depend on the depth of the water to your concrete... view full answer...
We have just what you are looking for.
You will need the Taylor Made Sur-Moor T3C Mooring Buoy with Center Tube - 24" Diameter # 36946374 with metal collar # 36933025.
I included videos of the products mentioned for you to take a look at. view full answer...
The distance between the two eyes on the Taylor Made Mooring Buoy Rod # 36933015 is going to be 15".
I have attached a video depicting this measurement for you to check out as well. view full answer...
I don't have any information available that would tell me which bearings your trailer used, but I can certainly help you figure it our for yourself.
Closely examine the old bearings, looking for a part number engraved on the bearing cage. Get the numbers off both the inner and outer bearing. If you can't read the reference number, you can use an accurate measuring device like a digital caliper to measure the diameter of the spindle where the inner and outer bearings ride, as well as the... view full answer...
I do have an option for you but all of our boat trailer covers are designed to be used with a boat on a trailer or in storage. That said, if you are able to find a way to secure the straps for the cover to the boat while in the water then I do not see any other reason as to why they would not work in this application as well.
In order to make sure we get you the correct cover I would need to know the widest point of your pontoon boat. If it does not exceed 96" then you can use the Classic... view full answer...
We've checked with Convert-a-Ball in the past and they have told us that the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter # CAB-C5G is perfectly compatible with the Morryde pin boxes like what you have. The cushioning would not be an issue at all or cause too much movement. view full answer...
We have spoken with our contacts at Classic Accessories about fitting their covers to deckboats like your 2009 Hurricane 202 OB deck boat and they have stated that they will fit. So for yours that is right at 20 feet you would want the part # 052963889581.
A breathable fabric wouldn't be waterproof so this would not be considered breathable but it is mildew resistant. That is why we don't offer a breathable solution. view full answer...
I do have a solution for you but the cover you referenced Taylor Made Eclipse Pontoon Boat Cover item # 36970912 is not for trailering. I recommend the Classic Accessories StormPro Pontoon Boat Cover item # CA20028, this cover is rated for both storing and hauling your 2015 Suntracker Party Barge 22foot DLX. The cover fits boats from 21' - 24' long and 96" wide at the widest point of boat. view full answer...
Yes, the Trailair Air Ride 5th Wheel Pin Box # LC158778 referenced in your question is compatible with your PullRite 2700 as long as you use the correct capture plate. We do not currently carry PullRite products but according to my research the correct capture plate is the part 331758, which you can obtain from PullRite directly. view full answer...
Hi Tom,
We don't currently offer the a version of the Better Bath # LC209795 with a 10-1/2" height but we do offer the Better Bath RV Shower Pan # LC298087 and # LC325246 which are slightly smaller at 27" long x 27" wide as options with a 10-1/4" (LC298087) and 10-7/8" (LC325246) height and front access panel. view full answer...
According to Benjamin Moore, the paint manufacturer, their parchment is "Inherently sophisticated and endlessly versatile, the Off-White collection offers subtle nuances of whites that suit tranquil, serene environments as well as creates color-enhancing accents for dynamic spaces. A compilation of 152 white and off-white colors."
Or in other words it is sort of a light beige and I would say it meets the above explanation; and, based on what you are looking for, Better Bath 24-5/8" x... view full answer...
Yes, I pulled up pictures of your 2017 Sunseeker Class C and the taillights it has is the # 328-003-30LEM2.
The really great thing about RV trailer taillights is that they are all very universal since they all wire up the same and most manufacturers make versions of the same designs so that means that if you are looking for replacement taillights and you find an assembly that looks just like what you have then it will work great. So if your RV has what looks like the # 328-003-30LEM2... view full answer...
From my research it looks like the 1998 Chevrolet S-10 pick with the Extreme Kit comes with a roll pan bumper. If that describes your vehicle then we do have a class III trailer hitch for you. Take a look at part # 13920.
I have included a link to the installation instructions for you.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch... view full answer...