There is a padlock that is compatible with the Blaylock EZ Lock Gooseneck Coupler Lock # BLTL-50, but if you were referring to the Master Lock Shrouded Padlock # 37DAT, it will not fit because the Coupler Lock has a 3/8 inch diameter hole for the padlock to fit and the Shrouded Padlock fits openings of 1/2 inch diameter or larger.
The padlock which is compatible with the Blaylock EZ Lock Gooseneck Coupler Lock # BLTL-50 is the Master Lock Stainless Steel Padlock with Shielded Shackle #... view full answer...
I went out to the warehouse and grabbed the Bauer Products Compression Latch # BA87FR and Bauer Products Padlock # BA46VR and was able to get the padlock to sit inside of the handle. It is a tight fit to get the body of the padlock in the handle but it can be done.
Both the latch and the padlock only come keyed alike with other latches or padlocks so you would have to have a professional locksmith rekey the locks to have them alike. view full answer...
Yes, the BOLT padlock you'd need for the ignition key of your 2020 Chevy Silverado part # BL7023537 would fit in place of the supplied padlock of the ToyLok Retractable Cable Lock with Padlock # LC337120 that you referenced. view full answer...
There isn't a specific padlock that goes with the B&W Extend-A-Goose Gooseneck Coupler # BWTEXA4200 so I went out to the warehouse to measure the diameter of the hole where a padlock would install. The hole is 0.337 inches in diameter so a lock with a 5/16 inch diameter shackle, # ML1KA, would be the best option. view full answer...
The Padlocks for Maxtrax Recovery Boards # MA22PR cannot be keyed to 012, however you could just use the Roadmaster Base Plate Quick Disconnect Padlocks # RM-308 which includes 4 padlocks and they all will use the same included key. view full answer...
The Blaylock EZ Lock Trailer Coupler Lock # BLTL-33 can be used with a padlock shank that is no thicker than 3/8 of an inch so your padlock with a 14 mm (0.55 inches) shank is too big to fit through the hole on the pin.
We do have the Master Lock Stainless Steel Padlock # ML40D which has that 3/8 of an inch diameter shank and is a very popular option to pair up with the BLTL-33. view full answer...
I may have a solution for you, but the Master Lock Hidden Padlock part # ML6271 cannot be ordered keyed alike. However, we do have some heavy duty padlocks with a 3/8" shackle that can be keyed alike that can provide a comparable solution. I recommend looking at the Master Lock Laminated Steel Padlock- 1-15/16" Wide - 3/8" Shackle # ML312KA, which is also a durable padlock option, but doesn't have the hidden design for the added layer of theft protection. This is available to keyed alike... view full answer...
Roadmaster does not offer the Roadmaster Lock Set - Hitch Lock and 2 Quick-Disconnect Padlocks # RM-304 and the Roadmaster Quick Disconnect Padlocks (Qty 4) # RM-308 keyed alike.
The only option we have for you to get all keyed alike padlocks and hitch locks is to use the BOLT system that keys to your vehicle ignition key. For instance if you have a Ford, you would use the # BL7018519 padlock and the # BL7018447 Hitch Lock. view full answer...
We certainly have replacement keys for your Master Lock padlocks!
For your A1397 key, you will want to use part number # MLK1 and type in A1397 in the box.
For 0579, you will also want to use # MLK1 and type 0579 in the box.
For key 10L759, you will want to use # MLK27 and type 10L759 in the box. view full answer...
It sounds like you have the ToyLok Retractable Cable Lock with Padlock # LC337120. We do not have replacement keys and if there are no numbers stamped on the key or lock, there is not really a way to know what the correct key option could be.
But there are a couple potential options for getting more keys. You can take your current key to a home improvement store and have duplicates cut or you can get a different padlock that has more keys with it. As long as the padlock fits through the... view full answer...
Quick Disconnects in this case is referring to Roadmaster Quick Disconnects # RM-201. It has nothing to do with the operation of the locks themselves, it refers to what they are made to fit.
All 3 of the locks work the same just like any other padlock. view full answer...
I would be happy to help. The Spare Tire Carrier for Yakima Roof Cargo Baskets # Y07076 can use any padlock that has a shackle diameter of 1/4".
While there isn't really a padlock that is going to perfectly address all of your concerns (suitable for outside, no rattle and no scraping), the Bauer Products Padlock # BA46VR is our best option.
The Bauer Products Padlock # BA46VR has the 1/4" diameter shackle that is needed, but also features a steel shackle that resists corrosion and a black... view full answer...
The Master Lock Covered, Solid Body Padlock # 131D that you referenced will fit perfectly to lock the ratcheting arms on the Swagman Platform-Style 2 Bike Rack # S64663. If you watch the video I attached and skip to the 1:28 mark you can see where our installer shows where the padlocks will be used. view full answer...
I recommend using the Master Lock Covered Solid Body Padlocks # 141T to lock the ratcheting arms on the Swagman Nomad Bike Rack for 2 Bikes # S36FR. These padlocks have a 1/4" diameter shackle and they use the same key since they come in a pair. view full answer...
The Master Lock Brass Padlock part # ML4140LH does not have a keyed alike option, it's keyed unique. I have attached our list of keyed alike padlocks below. view full answer...
Yes, we do offer the Trimax Hidden Padlock as a Single # TMX88ZR, 2-Pack # TMX63FR or 3-Pack # TMX73FR which all the locks in the package will be keyed alike. This style padlock works best on the Trimax Hidden Shackle Padlock Hasp # TMX28ZR but will work on other latches that accept a 3/8" diameter shackle pin. view full answer...
We went and measured the diameter of the padlock hole of the Battery Disconnect Switch with Lock part # 3376391005 and it is 1-3/16 inch. view full answer...
I went out to our video studio to take a look at the XTC-2 and found that the padlock hole that can be used to secure the frame hooks of the Swagman XTC-2 Bike Rack, # S64670, into position measures right at 1/4 inches. With this measurement, I recommend going with the Master Lock Covered Solid Body Padlock with 3/16 Inch Diameter Shackle, # 131D. This lock is sold individually. view full answer...
If you check out the attached review video of the Curt Cargo Bag # C18210 (about the 2:00 mark) our video team member already measured the zippers to have a hole that is about 3/8" diameter so you will just need a padlock with a shackle diameter smaller than 3/8" to use with the bag.
The Master Lock Brass Padlock - 1-1/2" Wide - Long Shackle # ML4140LH has a shackle diameter of 1/4" so it should work just great for your application. If you would like a smaller diameter shackle then I recommend... view full answer...