bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Keystone Bullet Ultra Lite Travel Trailer


  • Tandem Axle Storage Tire Cover Recommendation for 2017 Keystone Bullet 220RBI
  • Yes, the tandem axle tire cover kit part # 290-3923 will fit your tires that measure 26.1 inches. This kit is designed for tire a 27-29 inch wheels but will work great on yours too. Would be slightly loose but still fit good.
    view full answer...

  • How to Pick Out AC Cover for Dometic AC Unit
  • Dometic makes several different lines of AC units for RVs. We have quite a few different covers to fit the various models but you'll have to first figure out what you have. Once you do know what you have check out the link I attached that shows all of the covers we offer for Dometic units. On the filter section of the page you'll then need to select the model you have and the correct covers will be listed.
    view full answer...

  • Determining if Larger 235/85R16 Tires Will Work on 2017 Keystone Bullet Ultra Lite Trailer
  • Whether or not you can mount a larger 235/85R16 size tire on your Keystone Bullet Ultra Lite Trailer just depends on the amount of fender and frame clearance you currently have. We recommend having at least 4-1/2 inches of clearance between the top of the tire and the fender and at least around an inch of clearance between the tire's side wall and trailer frame. A 235/85R16 size tire such as the excellent Provider # TTWPRG235R16 has an overall diameter/height of 31.73 inches and a width...
    view full answer...

  • What Size Mattress Does 2017 Keystone Bullet Ultra Lite 272BHS Have
  • We have both sizes listed for your 2017 Keystone Ultra Lite Bullet 272bhs which means you'll have to measure to be sure. The short queen size like # e97FR measures 75 by 60 inch. The regular queen size like part # e47FR measures 80 by 60 inch.
    view full answer...

  • How Many of the Hopkins LED Levels for Trailer HM08201 Are Needed for Trailer
  • If you wanted to level your trailer from front to back and side to side you'd only need one of the Hopkins Electronic LED Smart Levels # HM08201. The hinged design of this kit allows you to check the front to back and side to side level just be swiveling it.
    view full answer...

  • Can the etrailer 6,000-Watt Portable Inverter Generators Handle Two Air Conditioning Units
  • The etrailer 6,000-Watt Portable Inverter Generators part # 333-0003-2-0007 should be enough to power the 13.5k btu and 15K btu air conditioning units on your travel trailer. They have a 6,000 watt starting output and a 5,500 watt running output. The average RV 13.5K btu air conditioning unit pulls 2,750 watts while starting and 1,250 watts while running. The average RV 15K btu air conditioning unit pulls 3,500 watts while starting and 1,500 watts while running. Therefore, so long as...
    view full answer...

  • Can One Generator be Shut Off When Wired In Parallel with Another Generator
  • When run in parallel with a second A-iPower Inverter Generator # 289-SUA2000I you can indeed shut the second generator off while continuing to run the AC unit with just the first generator. You will just want to make sure that the running power output (1,600 watts) of this generator is enough to run the air conditioner. When run in parallel the two A-iPower Generators will provide a starting power output of 3,800 watts.
    view full answer...

  • Recommended Fireplace for 2017 Keystone Bullet Ultra Lite
  • We don't have a perfect fit for the dimensions you gave of 28x18x7.5 inches. Here are the closest options: Greystone 26" Electric Fireplace with Crystals # 324-000069 with overall dimensions 27-7/8" wide x 6-1/4" deep x 21-3/4" tall for cutout 25-1/8" wide x 5-7/8" deep x 20-7/16" tall. You will need to make some slight modifications to get the fit you desire, but It will give you a nice look like you desire.
    view full answer...

  • Recommended Lippert Bolt-on Shock Mount Kit for 2017 Keystone Bullet Ultra Lite 287QBS Trailer
  • Your 2017 Keystone Bullet 287QBS has a GVWR of 7600 lbs. Based on that, we can tell that your axles have to be rated at for at least 3,800 lbs each. That most likely rules out the 2-3/8 axle diameter of a 3,500 lb axle. You most likely need the Lippert Components Bolt-On Shock Mount Kit w/Heavy Duty Oil Shocks - Fits 3" Axle Tube # LC281281 and you will need one kit for each axle. I recommend measuring your axle diameter not circumference to confirm.
    view full answer...

  • Has the 5-Point Electric Ground Control TT # LC672136 Received Good Feedback
  • The Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System # LC672136 is actually pretty new and we currently don't have any customer reviews on it (as of October 2018). However, this is the travel trailer version of the Lippert Ground Control 3.0 # LC358590 which is very popular and we have heard that customers love the system. Since the travel trailer version is an adaptation of the Ground Control I am confident that you will be very pleased with how well this not...
    view full answer...

  • Recommended Firestone Air Bags on a 3 Inch Suspension Lifted 2012 Toyota Tundra TRD
  • For your 2012 Toyota Tundra TRD, there are special kits for compatibility with air springs. I recommend the Firestone Ride-Rite Air Helper Springs # F2445 along with the 3 inch lift spacer kit # F2368. This suspension enhancement comes with the manual inflation valves, but if you want the convenience of leveling your truck at any time, I recommend the Firestone Air Command I - Analog Gauge w/ Standard-Duty Compressor # F2158. This gives your the compressor, switch, and gauge to assist.
    view full answer...

  • Shank Recommendation for Use with Reese Strait Line in 2-1/2 inch Hitch
  • Yes, the shank part # RP54977 that you referenced would work perfectly for you. It will allow you to swap out the shank you have in your # RP66084 to give you the drop you need and then also fit the 2-1/2 inch hitch you have.
    view full answer...

  • Powered A-Frame Jack Recommendation for Keystone Bullet 220RBI
  • I looked up your Keystone Bullet 220RBI and it's a camper on an A-frame trailer which we have a great powered jack option for. I recommend the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift # JET-5000. It has a lifting capacity of 5,000 lbs which would be more than you'd need but will ensure that the jack will operate quickly and last a long time.
    view full answer...

  • Locating Replacement Scissor Jacks for 2016 Keystone Springdale Trailer
  • Trailer manufacturers do not typically keep record of smaller parts such as the scissor jacks that would have come with your 2016 Keystone Springdale Summerland Mini 17. With that being said, just about any properly rated scissor jack will work great as a replacement. The Lippert Scissor Stabilizer Jacks w/ Handle # LC285326 referenced in your question have a total lift capacity of 10,000 pounds (5,000 pounds per jack). They have a collapsed height of 4-1/4 inches and a height of 24 inches...
    view full answer...

  • Hitch Option for 2015 Keystone Bullet Ultra
  • The best hitch option we have for travel trailers like your 2015 Keystone Bullet Ultra Lite is going to be a Curt multi fit hitch like part # 13703 which fits all RV frame styles between 22 and 72 inches apart.
    view full answer...

  • Correct Replacement for 10 Inch x 1-3/4 Inch Braking Assemblies
  • The 10" x 1-1/2" braking assemblies part # K23-472-473-00 will use the same four bolt brake mounting flange as the 10" x 1-3/4" braking assemblies you have but the hub/drum that goes with these uses a LM67048 inner bearing and L44649 outer bearing which I don't believe is correct for your trailer. The most common replacement for the 10" x 1-3/4" braking assemblies you have are going to be the 10" x 2-1/4" braking assemblies, part # 23-26-27. The correct hub/drum for this is part # AKHD-545-35-K...
    view full answer...

  • Recommended Kit to Raise Height of 2016 Keystone Hideout 175LHS
  • For your 2016 Keystone Hideout 175LHS, I recommend the over-under conversion kit # K71-384-00 which will put your axles under your leaf springs and raise your trailer by the diameter of the axle plus the height of the leaf spring stack. This also will not require upgrading any other components but you can choose to upgrade tires or wheels if desired based on that additional clearance.
    view full answer...

  • What Size Hitch Ball Does 2020 Keystone Bullet 291RLS Use
  • According to what I was able to find your 2020 Keystone Bullet 291RLS has a coupler designed for a 2-5/16 inch hitch ball so for hitch ball that works with your WD system and is right size you'd want the part # 63847.
    view full answer...

  • Replacement 3,500 Pound Trailer Axle for Coleman Trailer
  • I do have a solution for you but we do not have an axle that meets the measurements you have provided. What I recommend to replace the axle AND the suspension all at once is a Timbren Axle-Less system such as # A35RS545 or # A35RS545E. With this set up you would not need to replace suspension parts and the Timbren springs that will replace them do not require maintenance like leaf springs set up would. I have linked a video example of a Timbren system. There are a lot of things that go...
    view full answer...

  • Recommended Storage Cover for 2018 Keystone Bullet Ultra Lite Travel Trailer
  • The Adco RV Cover for Travel Trailers - All-Climate + Wind (DISCONTINUED) AD77ZR will fit travel trailers between 24 feet 1 inch and 26 feet long. The cover doesn't vary by different models like you listed only changes by length of trailer. This is a great product yet not the correct fit for your trailers listed. The 2018 Keystone Bullet 243BHS has a length of 28.33 feet, the 243BHSWE has a length of 27 feet 10 inches, and the 247BHSWE has a length of 28.25 feet, so the correct fit is...
    view full answer...