Your 2004 Jayco Qwest pop up uses a standard style of RV door latch which is what the Global Link RV Entry Door Latch Kit part # 295-000019 you referenced is designed to fit. view full answer...
I can help you determine the correct replacement wheel for your 2018 Jayco Hummingbird RK but unfortunately I was not able to find the bolt pattern of your wheels as we do not have a list by manufacturer.
The most common bolt pattern is the 5 on 4-1/2" like what is found on the Dexstar Steel Spoke Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2 # AM20422 which is a very cost effective steel wheel, but to confirm this you will need to measure the bolt pattern on your spare wheel using the included... view full answer...
Looks like your 2016 Jayco North Point 377RLBH has 7k axles. We only have one leaf spring that would be rated high enough for that with the part # DX74XR which is rated for an 8k axle and is 24-7/8 inches long from bolt center to bolt center. We don't have a way to determine what length spring you have so you'd have to measure yours and see. view full answer...
Kenda recommends that their trailer tires like the one included with the # AM31952 wheel/tire combo be kept fully inflated to the 50psi listed on the tire sidewall. I've linked to a product description video for the # AM31952 wheel/tire combo. view full answer...
Since there are supports on the inside of the frame that block where the brackets of the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703 need to attach, the best option would be to use the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 which will mount to the 4" bumper your 2008 Jayco Eagle 320RLDS has.
I do not recommend cutting off any factory supports to allow clearance for the hitch to fit.
I included videos for each of the products mentioned for you to... view full answer...
The Blue Ox weight distribution systems are sold only with shanks so you'd need to go with the # BXW1503 and then get a 2-1/2 inch shank separately like the Curt # C17131. The Curt shanks fit directly to the Blue Ox systems since they are made to an industry standard. view full answer...
I do have an option for you but we do not have a standard axle that would work on your 2010 Jayco Designer 5th wheel trailer. Instead, you would want to look into one of our Timbren Axle-Less Trailer Suspension Systems like part # TASR7KS01. This system will actually replace the leaf springs on your trailer with a set of aeon springs that will work to absorb road shock and support the trailer's load better than the traditional leaf springs would.
In order to add brakes you can use the... view full answer...
We recommend using a weight distribution system when the trailer weighs 50 percent or more of the vehicle weight or if the rear of the vehicle is sagging. I have included a link to our FAQ article on weight distribution for you to view for more info.
If you determine that weight distribution is needed you will need to go by the loaded tongue weight of the trailer. You can calculate the loaded tongue weight by combining the tongue weight of the trailer when loaded and ready to tow plus... view full answer...
My suggestion is the Curt Adjustable Hitch # 13703 along with a trailer/RV approved bike rack. The Curt hitch will mount to any box frame, C-channel frame, or I-beam frame that is between 22 inches and 72 inches wide. The included hardware can be used to bolt the hitch to the trailer or it can be welded on for a no-drill application. I have attached an installation video that you can use for reference.
The Swagman E-Spec Bike Rack for 2 Electric Bikes, # S94FR is one of the few 5th wheel... view full answer...
I think we may have a solution that will work for you as we offer a very wide variety of spare tire carriers. However, I would really need to see a photo of you setup in order to offer the best advise. The issue you will run into trying to find a u-bolt is that the studs for a u-bolt that fit a 4" x 4" bumper would not align with bolt holes in the wheel.
The best option we have at this time would be to use an undercarriage storage system like the Lippert Underchassis Double Bin Storage... view full answer...
Since Atwood is no longer around and we can't get their replacement lead and follow jacks your best option will be to replace the entire landing gear set like with the similar # LG-1 for a powered set or part # LG-183708 for a manual set. These kits will install with the same brackets as what your trailer has currently so it will be an easy install. view full answer...
For your 2020 Jayco travel trailer's wheels with zerk fittings, I recommend the LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications # L11465 along with the grease gun # L30200. This grease is fully synthetic and is perfect for wheel components. view full answer...
Your 2020 Jayco Jay Flight SLX Travel Trailer is prewired for GoPower Portable Solar System like this one # 34282610. Then it all comes down to how much power you're wanting to use. Check out this article we made to help you calculate how much power you really need.
The general rule of thumb is that a 100-watt solar panel can produce about 30 amp-hours per day, so you can use this guideline to determine about how many panels you need. view full answer...
In the 14-5/8 inch equalizer length we only have the Equa-Flex part # LC314336 that you mentioned. This might slightly change the height of your trailer but it wouldn't be to a significant enough point that you'd notice it. It would do a great job helping the ride quality though so I would recommend it highly.
Assuming you have the standard 2-3/8 inch diameter trailer axles you'd just need the u-bolts part # CE15286GA and you'd be set with the # RM-2450 and the # MR46ZR. view full answer...
The disc brake kit that's going to fit your 2020 Jayco Eagle HT 30.5 MLOK that has two 3,500 lb axles you'd need the part # HBA16-252-82 that includes the actuator, breakaway kit, junction box, and 7-way trailer connector. Then for just the disc brake kits part # K2HR35D and you'd be set. I prefer the Hydrastar actuators as they are more reliable overall and faster reacting. view full answer...
I may have another option for you, but we do not carry the Andersen Trailer Jack Blocks you were mentioning and was unable to confirm if they will work with rectangle feet you have on your Jayco Eagle HT 5th wheel trailer.
We do offer the Stromberg Carlson Base Pad Extreme for RVs and Trailers - 6,000 lbs - Qty 6 # SC33VR that is similar to the Andersen blocks, and my contact at Stromberg Carlson confirmed will work with your rectangle jack feet. The # SC33VR is 7" tall and has a weight... view full answer...
If your 2017 Jayco Pinnacle 5th wheel has a Dometic or VacuFlush brand toilet the seal part # DOM35FR is the correct seal. I don't have a way to look up what toilet your Jayce would have. view full answer...
When a trailer weight is more than 50% of your vehicle weight a weight distribution system is recommended. This will not only help with any possible rear sag on your Tacoma, but the greatest impact will likely be in the sway control. The light trailers with big wind gusts and passing vehicles can have you white knuckling your steering wheel quickly.
My recommendation for your trailer and truck is the Reese Strait-Line Weight Distribution System w Sway Control # RP66083. This is the... view full answer...
From the specs available to me online, it looks like your 2021 Jayco Jay Flight SLX Travel Trailer is 16'-6" in length. This will be from the back bumper to the coupler on the trailer tongue. To determine the proper fit, measure the length (not including the trailer tongue) and sidewall height (undercarriage to the top of the natural roof line). This cover is designed to accommodate rooftop accessories such as AC units and vents.
Based on this, I suggest the Adco Polypropylene Storage... view full answer...
The base plate kits for your 2017 Chevrolet Equinox that we offer don't require you to cut any holes in the bumper so no worries here. If you take a look at the attached photo you will see how the arms are able to protrude through without cutting. They use an opening already present opening on the vehicle. In regards to a supplemental braking system, they will not have any adverse effect on the vehicle's physical braking components (rotors, pads, calipers etc.).
When it comes to the installation... view full answer...
Go To Results