Expert Answers about Itasca
- Recommended Storage Cover for 2013 Itasca Meridian Motorhome
- I suggest you go with the Adco Olefin HD All-Climate RV Cover for Class A Motorhome, # AD84ZR. This is the up to 40' fit, use the cinch strap at front and rear to pull that extra 18 inches in for a tight fitment.
view full answer... - Replacement Vent Lids For Motorhome Bathroom And Kitchen
- You can use Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke. # V2092SP-29 for both your bathroom and kitchen vents. There is not a specific vent lid for 13" by 13" roof vents and this is the closest size; it is recommended to enlarge the 13" by 13" to the now standard 14" by 14" so that you will have a nice fitting lid.
Then you'll need a garnish; 2-1/8" # VA0445-34, 3-1/8" # VA0445-35 or 5-1/8" # VA0445-37 depending on the thickness of your roof. I also recommend...
view full answer... - 2009 Itasca Navion Suspension Enhancement Suggestions
- In a Class C motorhome addressing body roll/sway is a common issue. Suspension on the cutaway van chassis that most Class C's are built on is adequate with a van body on the chassis. However, when coach builders place a significantly different body on the chassis that obviously changes the dynamics and many OEM coach builders fail to upgrade/enhance those now less effective suspension components. We have two options available the Roadmaster Rear Anti-Sway Bar, # RM-1209-120 is a significant...
view full answer... - Replacement Air Conditioner Shroud for Coleman 131188-05-700/053903-01-700
- The MaxxAir TuffMaxx Replacement Shroud for Coleman-Mach RV Air Conditioners part # MA00-325001 should be what you are looking for but I would not get caught up in all the different part numbers as there are more than one that will work. That said, the problem is that I don't know which series you have as I cannot look this up based on the RV info nor can I reference older part numbers very well. The above fits all Mach 1, 3, and 15s. If you don't know which you have I'd need to know the...
view full answer... - Recommendation for Storage Cover 2009 Itasca Navion 24H Motorhome
- For your 2009 Itasca Navion Motorhome 24H I suggest the Adco Olefin HD All-Climate + Wind RV Cover for Class C Motorhome # AD54ZR. This cover is designed for Class C motorhomes up to 26' in length. Feedback from customers has shown this to be a good fit for the Itasca Navion & Winnebago View. This cover is intended for long-term storage in all climates and made from heavy-duty fabric that protects against rain, dirt, wind, and sun. The top panel is constructed of Olefin HD fabric that blocks...
view full answer... - Can SnapRing TireSavers Tire Covers # ST7000WH Fold Up for Storage When Not in Use
- The SnapRing TireSavers Tire Covers # ST7000WH that you referenced is made of vinyl which can easily collapse and fold for storage in an RV bin or elsewhere.
view full answer... - Locks for an RV Refrigerator Door
- While we don't have locks for specific refrigerator doors, you could use a cable lock like the etrailer Cable Lock, part # e98891. It's 10 feet long and can wrap around the door handles. I've linked to a video review of this cable lock.
If you want something that can bolt onto the door and looks a little nicer, you can use the ToyLok Retractable Cable Lock, part # LC337120.
view full answer... - How to Measure RV Frame for Draw-Tite Multi-Fit Motorhome Trailer Hitch
- When measuring the frame width of your motorhome to ensure fitment of the Draw-Tite Multi-Fit Trailer Hitch # 5350 that you referenced, you will want to measure from the outside of one frame rail to the outside of the other frame rail. If you find that the frame width on your chassis is 24 to 46 inches, then this trailer hitch will work well.
This multi-fit hitch features a 2 inch receiver opening, a 5,000 pound towing capacity, and a 500 pound tongue weight limit. Its black powder coated...
view full answer... - Availability of 4-Way Round to 4-Way Flat Adapter
- Sounds like what you are in need of is a 4-way round to 4-way flat adapter like part # ADP001. I looked up the Towmate wireless tow lights since we don't carry them and it looks like you can order it with a 4-way round like what you mentioned.
view full answer... - Vent Cover Recommendation for Fan-Tastic Roof Vent 2000DM
- Yes, I was able to pull up pictures of the Fan-Tastic roof vent 2000DM and it uses the same vent lid as the part # FVK1020-19 that you referenced.
view full answer... - Bike Rack for E-Bikes With Fenders & Step-Through Frame on Motorhome
- So since you are carrying your bikes on a motorhome, you will need a bike rack approved for use by the manufacturer on the back of a motorhome due to it being a rougher, bouncier ride.
We do have one bike rack that is approved for use on a motorhome, can carry your 55 lb e-bikes, and is compatible with bikes that have fenders and a step-through frame, the Swagman Current 2-Bike Rack # S64678.
This is a frame-mounted bike rack, so because you have a step-through frame you will also need...
view full answer... - Replacement Puck Light for 2015 Winnebago Itasca Sunova
- Based on the dimensions you listed the LED RV Interior Can Light # DG52445VP is an exact fit for the puck lights you are replacing in your 2015 Winnebago Itasca Sunova.
view full answer... - Recommended Replacement Water Heater for an Atwood GCH10A-4E
- I recommend going with the Furrion RV Tankless Water Heater # FR98SR for a replacement.
Tankless water heaters really are the way to go because you get on-demand hot water, higher heating capacities than traditional water heaters, and are much more efficient than regular gas units.
This particular unit has a heating capacity of 13,000 - 60,000 Btu which is much higher than your older Atwood unit, a wall thermostat which easily allows you to adjust water temperature, and has internal...
view full answer... - Storage Cover for 2015 Winnebago Navion 24G Without Cabover Bunk
- For your 26-foot Itasca Navion 24G Class-C motorhome we recommend the ADCO # AD54ZR Olefin cover. Olefin HD Class C RV cover works best for long-term storage in all climates. Heavy-duty fabric protects against rain, dirt, wind, and sun. Contoured fit matches shape of your RV. Secures with cinch rope and straps This will work just fine with your cabover option.
I also recommend providing similar protection to your Navion's tires by adding tire covers that block harmful UV rays that can...
view full answer... - Recommended Roof Vent Lid for Jensen Style Roof Vent
- Let me see the pictures and I'll be able to tell if the part # BVD0449-A01 is the correct fit or not.
view full answer... - Is a Battery Charge Line Needed When Flat-Towing a 2020 Jeep Grand Cherokee
- The Roadmaster Battery Charge Line Kit for Towed Vehicles part # RM-156-25 can be installed on a 2020 Jeep Grand Cherokee. If you will be pulling power from the vehicle's battery while in tow then it would be a good idea to use the charge line to ensure you don't have a dead battery when you arrive at your destination and are ready to unhook the vehicle from the motorhome.
view full answer... - Should Floor Jack be Used When Installing Rear Sway Bar on 2013 Ford F-53 Motorhome Chassis
- You'll want to use a floor jack to get the rear axle off the ground and then use jack stands to support the axle so that you have enough access to install the rear sway bar part # RM-1139-149. The leveler jacks should be relied on as the only way to hold the motorhome off the ground but I would lower them anyway to use as a backup for in case the jack stands fail. Motorhomes are incredibly heavy so getting under one to work on it in any way is dangerous. As many fail safes as you can use...
view full answer... - What E-Bike Carrier Do You Recommend For 2013 Itasca Navion iQ Motorhome And A Toyota 4Runner
- I took a look at all of our hitch bike racks rated to carry e-bikes and are motorhome compatible. We only have one rack that weighs under 40 lbs, secures the bikes by the wheels, and is motorhome compatible. It is the rack you mentioned in your question, the Saris SuperClamp HD 2 Bike Platform Rack - 2" Hitches - Wheel Mount, part # SAR44VR. Our next best option is the Kuat Transfer V2 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount, part # KU84FR.
For starters it is motorhome compatible....
view full answer... - SumoSprings Kit for Front and Rear of 2014 Itasca Sunstar 35F
- The correct SumoSprings kit for your 2014 Itasca Sunstar 35F is the part # SSR-180-54-1 for the rear and part # SSF-170-40-2 for the front.
view full answer... - Recommended 44 Series Clearance Trailer Lights
- We do have the lights you are looking for. I have attached a link to our product page for the 44 series lights we carry.
If you are looking for a Red clearance light you can use part # MC44RB. This light measures 4 inches long, 1-1/2 inches wide, and 15/16 inches deep. The mounting holes are spaced 3 inches apart.
For an Amber 44 series clearance light you can use part # MC44AB.
view full answer...
Go To Results