The Pullrite 2900 is designed for industry standard 5th wheel rails. That means that the adapter part # RP30156 would be all that you would need to install the hitch in the bed of your 2017 Ford F-350 with the hitch prep package.
This adapter fits the rail package of your truck bed and gives you the needed rails to install a fifth wheel hitch. view full answer...
So to answer your first question, there is not a switch that surface mounts, but there is a better MPPT solar controller you can get to replace your current one. The right solar controller depends on how much power you end up wanting, but a great option is the Go Power MPPT Solar Charge Controller # GP72RR.
The # GP72RR is for up to two battery banks, 100V solar panel input (which is more than 3 times as much as your current controller), works with all battery types, and has a remote option... view full answer...
Yes, the B and W Companion Base part number # BWRVB3300 that you referenced is the correct base for the 2023 Ford F-350 that has the OEM rail kit. view full answer...
The best tonneau cover I would recommend for you that is confirmed to fit your 2015 Ford F350 8 foot bed would be a retractable cover. This way you wouldn't have to deal with anything rolled up or folded up near your rear window and you would be able to access your 20k Reese M5 Hitch # RP30921 easily.
For that I would recommend the RollBAK G2 Hard Tonneau Cover # BAK26311. This cover automatically retracts into integrated canister to allow for full bed access. view full answer...
For your 2024 Ford F-350 I recommend the SumoSprings Rebel Custom Helper Springs # SSR-128-47-2. These have the highest capacity at 5,000 lbs which will be great since you plan to tow and haul heavy loads frequently. They also have a 2 piece design allowing for unlimited suspension travel while unloaded or on rough terrain. The SumoSprings have a bolt-on installation as well as a limited lifetime warranty. view full answer...
For the B and W Companion hitch part # BWRVK3300 that you referenced there is a bit of forward and back adjustment available for the head of the hitch. Being able to move the head back can help gain a bit of turning clearance since the nose won't be as close to the cab.
Since that additional clearance isn't always needed it can adjust forward to help distribute some of the trailer's weigh up to the front axle as well. view full answer...
The 18k Demco Hijacker part # DM8550024 that you referenced will attach directly to the factory rail kit that you have in the bed of your 2015 Ford F-350. No rail adapter would be needed with it.
The height range for this hitch is 15-1/2", 16-3/4", and 18-1/4". view full answer...
Yes, the Curt Underbed Gooseneck Kit part # C60720-5W does fit a 2008 Ford F-350 with air bags installed. I attached a picture of it installed with an Air Lift bag kit. view full answer...
The highest capacity front hitch we offer for your 2015 Ford F-350 is the part # 65049 that has a vertical pull rating of 500 lbs.
The best solution I could provide for you would be the motorcycle carrier part # UF48-979033 that has a 600 lb capacity and has a shipping weight of 65 lbs. When out of the packaging it should be right at 60 lbs, but for safety's sake you could load the ramp of the carrier in the bed of your truck to save weight from the front hitch. This would be your setup... view full answer...
Yes you can take the head from a B and W Companion hitch that fit to a Turnoverball gooseneck and fit it on a hitch base designed for a Ford OEM rail kit part # BWRVB3300.
This would give you essentially a # BWRVK3300. view full answer...
Thank you for all of the information and your photo!
It really looks like you've done your research with all of the various solutions you've looked at to try to prevent damaging the connection between your Lance Truck Camper and your 2019 Ford F-350. Here are the solutions I recommend for your situation:
1. Using an extension like the TorkLift # TLW6060 which gives you 5' of extra wiring like what you asked about. This is a good option but none of our extensions have that 90 degree bend... view full answer...
A grille guard is a great option to protect your radiator and other front-end components on your truck. However, some grille guards are better than others for protection from rocks.
Since you inputted a 2018 Ford F-350 into our fitguide, I assume this is the truck you have. For a great option for maximum protection, I recommend the Westin HDX Grille Guard with Punch Plate # 57-3905 The great thing about this design is that it comes with a mesh-like punch plate that provides more protection... view full answer...
I recommend the CargoGlide 2200XL Sliding Tray # CG2200XL-9548 as the best option for your 2024 Ford F-350 long bed. This tray has a 100% extension so you will be able to access the entire tray. The tray also has a weight capacity of 2,200lbs so you can carry very heavy loads without having to remove the tray for heavy cargo. view full answer...
If you have a standard Reese fifth wheel hitch you'll want to install a set of above bed fifth wheel rails in the bed of your 2017 Ford F-350.
For that you would want the Reese kit part # RP50074-58 which is a confirmed fit. view full answer...
If your 2019 Ford F350 has a 3” receiver and you need to have a 2” adapter with it's own pin hole then the Buyers Products # 337RTA302 adapter will work for you. If you need an additional 5/8” hitch pin I would recommend the Buyers Products # 337HP6256WC hitch pin with clip . If you prefer a locking hitch pin then the Master Lock # ML1465DAT will work well.
If your F350 has a 2-1/2” receiver then the Fastway # DTADP25-SS sleeve would work for your purpose. If you want a locking hitch... view full answer...
We do have one underbed fifth wheel rail solution for your 2017 Ford F-350 that I think you would like but we do not carry the Ford rail kit.
Instead you would want the B and W kit part # BWGNRK1116-5W which is a confirmed fit for your truck. With it you would be able to install the very highly reviewed Companion Hitch part # BWRVK3500. What's also nice is that this rail kit also doubles as a gooseneck hitch. view full answer...
To use your Reese 16k hitch # RP30047 in the bed of your 2017 Ford F-350 with the factory rail kit will require you to use the adapter part # RP30156. This will give you a rail set that your hitch is designed to fit and will fit the pucks of your truck. You'll also need the custom wedge kit # SWW-03 to prevent the king pin of your Reese Revolution from pivoting in the jaws of the hitch. view full answer...
The High Pressure RV LP Gas Regulator # 37207-30325 that you referenced is a vertical vent style regulator so it needs to install like what you see in the picture. view full answer...
I recommend the B&W Companion for a fifth wheel hitch in your 2020 Ford F-350. The thick dual jaw design reduces the rattle between the hitch and king pin is regarded as one of the best hitches around. And they're made in the USA.
If your truck is a long bed then you can use the fixed hitch, part # BWRVK3300. If you have the short bed you may need the sliding version, part # BWRVK3370. It just depends on your trailer. If yours is designed for short bed trucks and has a tapered front end... view full answer...
I definitely have an option for you, however your existing TorkLift SuperHitch # TLC1209 unfortunately isn't going to fit your new Ford F-350. This particular hitch is designed only for certain model years of the Sierra/Silverado, so it's just not going to line up to the frame rails on your new truck. Considering the quality of TorkLift hitches, you should hopefully be able to get a decent return by selling the item and you can use the money towards a new model.
If you have the 2015 model... view full answer...