Hitch Sleeve Extension and Reduction Adapter For Ford F350
Question:
I have a f350 king ranch it has a sleeve i need to use to hook my 2in camper to. But I cant use the sleeve for my bike rack. Need a extention or something. My allen bike rack had a lock and uses the hole where pin would go for a push pin. Holds it to the sleeve but not the receiver the sleeve sits in. So no way to put pin in. I need a sleeve that I can pin to receiver and extends out to have its own holes for my bike rack
asked by: Dwight B
Expert Reply:
If your 2019 Ford F350 has a 3” receiver and you need to have a 2” adapter with it's own pin hole then the Buyers Products # 337RTA302 adapter will work for you. If you need an additional 5/8” hitch pin I would recommend the Buyers Products # 337HP6256WC hitch pin with clip . If you prefer a locking hitch pin then the Master Lock # ML1465DAT will work well.
If your F350 has a 2-1/2” receiver then the Fastway # DTADP25-SS sleeve would work for your purpose. If you want a locking hitch pin then you should instead get the Fastway # DTADP35 which comes with a locking hitch pin.
Products Referenced in This Question
Hitch Pin and Clip For 2-1/2" and 3" Hitches - 5/8" Diameter x 4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 4-1/2 Inch Long
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Buyers Products
more information >
Adapter Sleeve for Fastway and Diversi-Tech 2" Locking Ball Mounts to 2-1/2" Receivers
- Hitch Adapters
- Hitch Reducer
- Ball Mounts
- No Extension
- Fits 2-1/2 Inch Hitch
- 2-1/2 Inch to 2 Inch
- Fastway
more information >
Adapter Sleeve w Hitch Lock for Fastway and Diversi-Tech 2" Locking Ball Mounts
- Hitch Adapters
- Hitch Reducer
- Ball Mounts
- No Extension
- Fits 2-1/2 Inch Hitch
- 2-1/2 Inch to 2 Inch
- Fastway
more information >
Master Lock Pivot Lock Hitch Pin for 2" Hitches - 5/8" Diameter - Stainless Steel
- Hitch Pins and Clips
- Standard Hitch Pin
- 3 Inch Long
- Fits 2 Inch Hitch
- 5/8 Inch Diameter
- 3 Inch Span
- Master Lock
more information >
Product Page this Question was Asked From
Buyers Products 3" to 2" Receiver Tube Adapter
- Hitch Adapters
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- No Extension
- Fits 3 Inch Hitch
- 3 Inch to 2 Inch
- Buyers Products
more information >
Continue Researching
- Shop: Adapter Sleeve for Fastway and Diversi-Tech 2" Locking Ball Mounts to 2-1/2" Receivers
- Shop: Buyers Products 3" to 2" Receiver Tube Adapter
- Video: Buyers Products Receiver Tube Adapter Review
- Video: Fastway and Diversi-Tech Locking Ball Mounts Adapter Sleeve Review
- Video: Fastway Hitch Adapters - Hitch Reducer - DTADP25-SS Review
- Article: How to Charge a Dump Trailer Battery
- Article: Trailer Maintenance Schedule
- Q&A: Trailer Grease Seal to Replace 127194TB
- Q&A: Recommended Replacement Grease Seal for 2014 Shorelander Boat Trailer
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: Can Brakes Be Added To Mobile Home Axle Used On Utility Trailer
- Q&A: 205/75R14 Size Trailer Tire Needed with Load Range D and Speed Rating of at Least 81 mph
- Q&A: Does Correct Track Trailer Alignment Kit # RR23QX Come with Enough Brackets for Tandem Trailer
- Q&A: How Does the Correct Track Trailer Alignment and Lift Kit Really Work
- Q&A: Will the Correct Track Trailer Alignment and Lift Kit Prevent Nose High Towing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: Trailer Hitch Receiver Sizes
- Article: How to Choose the Right Trailer Hitch Class