For Floor mats, WeatherTech does offer floor mats for your vehicle. There's mats available in black, gray and tan. Front, second row, third row and cargo area mats are available, depending on the set-up of your interior.
To find the correct mats for your Escalade ESV, click the link I've provided over to the right. Use the drop down menu, and select the category that matches your Escalade (ESV without 3rd Row Seating, ESV with 3rd Row Seating 2nd Row Bucket Seats or ESV with 3rd Row Seating... view full answer...
The particular Timbren Suspension kit you referenced, part # TGMFC1588H, is intended for a front axle application in the 2-wheel drive version of the 2000 Cadillac Escalade. If your Escalade is a 4 wheel drive model this kit will not fit. We do offer a similar front axle jounce spring kit that will fit your 4 wheel drive Escalade, part # TGMFK35C, but this would really only be necessary if you will be using a snow plow or other heavy front-mounted accessory.
Please note that suspension... view full answer...
The Konig Tire Chains part # KON44FR are what I recommend for 275/55R22 tires on a 2023 Cadillac Escalade. These chains have a class s rating which means they are very low profile, adjusters for automatic tensioning, and nylon bumpers to protect the vehicle's wheels. They are also very easy to install as you can see in the attached review video. view full answer...
The Blue Ox Base Plate kit part # BX1716 has been confirmed as a fit for your 2016 Cadillac Escalade with adaptive cruise control and because of that would not interfere with it.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the Blue Ox Avail part # BX7420 which includes safety cables. The coiled design helps keep the cables off of the ground.
For... view full answer...
Dual cam sway control can only be used on Reese weight distribution systems that have spring bars with curved ends for the cams to ride on. The Pro Series systems use spring bars with straight ends so you can't add a dual cam setup to them.
Best option would be to go with a new Straitline system that will allow you to use your current shank.
The part # RP66074 would be the kit to use if your tongue weight falls between 600 and 1,200 lbs. The part # RP66083 then is for if you have a tongue... view full answer...
I took a look at the online version of the owner's manual for your 2014 Cadillac Escalade and found that it features a towing capacity of either 8,300 pounds for the 2WD model or 8,100 pounds for the AWD model. I do still recommend verifying this by checking your copy of the manual but based on this information your Escalade can absolutely pull your Lund Pro Boat that weighs up to 4,362 pounds (as long as the weight of the trailer itself doesn't push the combined weight over the vehicle's... view full answer...
There are two ways to add sway control to your trailer set-up. One is to add simple friction-type sway control devices like Reese # 83660 (two can be used on a 30-foot trailer) to the existing hitch. The other method, which offers better performance and naturally is more costly, is to add a weight distribution/sway control (WD/SC) system like the Fastway e2 trunnion bar system # FA92-00-1000 which will provide both trailer sway control and a shifting of tongue weight (TW) forward onto the... view full answer...
I would love to help but we don't have any bearing or seal information for specific trailers. This is just not information that the manufactures release to the public. If you want to find the correct replacement bearings and seals you will have to get your hands dirty, there is no way around this.
If you absolutely don't want to rip apart the hubs/drums and read the bearing numbers or measure the spindle using the attached article then there is one other option and that is to look for... view full answer...
I have a solution for you but your current tow bar that is rated at 6,000lbs capacity is for the weight of the vehicle being towed.
Instead I would recommend the 10,000lb capacity Roadmaster BlackHawk 2 All Terrain Tow Bar # RM-422 for your 2009 Cadillac Escalade. I have linked a review video of this tow bar for you to check out.
If you don't already have base plates for your Escalade Hybrid, I recommend the Roadmaster # 3154-1 which will be compatible with the BlackHawk 2 with no extra... view full answer...
I may have a solution that will work for you, however, we do not offer replacement air shocks for your 2004 Cadillac Escalade EXT at this time. We do offer coil spring air bag inserts like the AirLift 1000 Air Helper Springs, # AL60769. These air bags fit in the rear coil springs and can be manually inflated for additional support.
Another option would be a bump stop replacement like the Timbren Rear Suspension Enhancement System, # TGMRG25C, that you referenced. These are rubber springs... view full answer...
Yes, the brake controller install harness part # 3016 that you referenced is the correct fit for both a 2016 and a 2017 Cadillac Escalade. These both install in the same location under the dash of the vehicle as well.
For a brake controller that plugs right into this adapter I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses... view full answer...
If you removed the OEM suspension on your 2004 Cadillac Escalade then you'll need to find an exact replacement for that. The air bag kits we have are designed to help an OEM suspension that's in good working order but these aren't up for completely replacing an OEM suspension on any vehicle.
Once you have an OEM suspension back in place I recommend checking out the Timbren Rear Suspension Enhancement System # TGMRG25C rated for 6,000 lbs and replaces your OEM bump stops so when your vehicle... view full answer...
Yes, for the 2017 Cadillac Escalade we have the # 3016 which is a plug and play style of brake controller install harness confirmed to fit the vehicle and a Tekonsha brake controller. You'll need to order the vehicle with the tow package though.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount... view full answer...
The transmission cooler part # D13504 would be exactly what you need. This is a large cooler that would work well for your 2007 GMC Yukon Denali. I attached an install video that shows it being installed in a very similar 2009 Yukon as yours.
Your engine temperature doesn't really seem that bad at all. But the transmission cooler will help slightly with that since it will allow the factory transmission cooler to run cooler as well which is connected to the radiator. Also the transmission... view full answer...
I recommend the K Source Universal Clip-On Towing Mirror, part # KS3891 for your truck. As long as you have a lip on the edge of your mirrors, these will work great for you. These mirrors are sold individually and will attach to either the driver or the passenger side mirrors. These mirrors measure 7-3/4 inches tall by 5-1/8 inches wide. I have attached a link to a product review video for you.
We don't have any custom fit towing mirrors yet for your 2015 Cadillac Escalade but these K-Source... view full answer...
The SuperChips Flashpaq F5 part # SU2845 that you referenced is a confirmed fit for your 2007 Cadillac Escalade with a 6.2 liter. It can give you up to an additional 12.8 horsepower and 11.5 ft lbs of torque. view full answer...
We do have a universal fit towing mirror from K-Source. It's part # KS3891. I've seen some feedback that these have worked for the 2018 Cadillac Escalade and they fit perfectly.
They're designed to work with factory side mirrors that are between 4-1/2"-11-1/2" tall and have a lip alongside the mirror face.
I've linked to a video review of this mirror for you to look at. view full answer...
The Curt Friction Sway Control for Weight Distribution Systems # 17200 is a great addition to an already existing chain style weight distributions system. It however will not work as well as a weight distribution system that is designed for sway control and has that integrated into the way it is made. The friction bar systems require removal before backing the trailer up and only reduce sway that is already occurring versus preventing it in the first place by design. I've attached an... view full answer...
Yes, we do offer half roof rack systems for a 2010 Ford F-250. I recommend the JetStream which has an aero shape and integrated slots for use with channel accessories. I have attached the parts you will need for this below.
Yakima JetStream Crossbar part # 8880650
BaseLine Towers for Yakima Crossbars part # Y62TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y79QR view full answer...
We have tire chains that fit your tire size of 265/65-18 but the Titan chains part # TC2524 are not them. Instead you would need any of the chains at the attached link.
The Glacier Twist Link chains part # PWH2228SC are a fit and will have a smoother ride quality due to the link design.
Be sure to check the owners manual of your vehicle to determine if there are any tire chain restrictions. view full answer...
Go To Results