Yes, the VacuFlush vacuum generator # DOM46FR will work much more quietly than standard macerator toilet motors. This system-wide vacuum instantly clears the bowl the moment the VacuFlush toilet is flushed. The generator has a low-profile design that allows for easy mounting without taking up much space. The system has plug-and-play wiring that requires no splicing to install.
RV toilets are designed to handle the flushing of RV-safe toilet paper. If you're using RV toilet paper like... view full answer...
While Furrion does not have an energy saving model, the Furrion Chill Replacement RV Air Conditioner for Coleman Setup # FR82PV, which will work great as an upgrade to your Coleman Energy Saver A/C, does store energy that can be used later for the next startup.
This A/C has a 13,500 Btu capacity, and also includes the necessary wiring harness to adapt to your Coleman setup as well as the mounting hardware needed for installation.
If you need the 15,000 Btu capacity version, the Furrion... view full answer...
To add a gasket seal to something like the Valterra Replacement Window Frame for RV Entry Doors # A77008 you can use the TremPro 644 Silicone Sealant # 0160297 which is what we use for our vent installations. view full answer...
Thank you for all of the specific model information for your 2007 Fleetwood Bounder 34F Workhorse Motorhome. I was able to narrow down our options to find a great set of front and rear sway bars made by Roadmaster.
Since you have the 22,000 lbs GVW W22 chassis, you're going to want the Roadmaster Front Sway Bar item # RM-1259-105 and rear sway bar the Roadmaster item # RM-1259-108. I have attached a couple of installation and review videos for you to take a look at as well.
For your... view full answer...
For your 2002 Bounder Motorhome with a Coleman 7700 Series A/C, I recommend upgrading to the Furrion Chill Replacement RV Air Conditioner for Coleman Setup # FR82PV.
This unit is compatible with ductless and ducted applications, includes a wiring adapter that will connect to your existing Coleman setup, and also includes all the mounting hardware for installation. view full answer...
You're looking for the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK18-RSSA, which is a confirmed fit on the 2006 Fleetwood Discovery Class A on a Freightliner XC chassis.
I've linked a review and installation video of this for you to have a look at. view full answer...
In order to accurately determine which wiper blades will it your 2021 Fleetwood Bounder Motorhome 33C, I am also going to need to know which connection type your wipers use.
For instance the:
-ClearPlus 78 Series HD Windshield Wiper Blade # CP78321 measures 32" long, and will fit a 1/2" to 5/8" wide saddle connection.
If you're able to let me know what your vehicle uses, I'd be happy to help you. view full answer...
For your 2020 Fleetwood Discovery 38K I recommend going with the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes # HLY64FR.
This rack can be used at the rear of your Fleetwood Discovery while you flat tow, has a max capacity of 80 lbs per bike - for a total of 160 lbs, and since the # RM-077-6 you have has a tongue weight of 400 lbs you'll have plenty of capacity for everything.
As far as stowing the tow bars when not in use, you're going to run into a space issue unfortunately,... view full answer...
I took a look at those latches on your 2016 Fleetwood Bounder and was not able to find anything, unfortunately.
With that being said, the best we can offer is for a completely different replacement. I know this probably is not ideal, however if you're interested the closest I was able to find is the:
-T-Style Hook and Keeper Door Holder for Trailer Rear or Side Door # PLR9-A.
This door holder uses a low-profile hook and keeper to keep your door open while loading and unloading. The hook... view full answer...
Per the manufacturer The Extended U-Bolt Kit for Roadmaster Anti-Sway Bar # RM-590050-00 are tightened down evenly snug and then turn a 1/4 inch more.
I attached a review video link below. view full answer...
If your 2021 Fleetwood Discovery 38W on the Freightliner chassis came with BrakeSync then the Demco Air Force One Supplemental Braking System for Freightliner # DM23MV is the only components you need for the vehicle being flat towed. The chassis already has the components installed for the Air Force One.
If you do not have the BrakeSync on your chassis the Demco SBS Coach Air Kit for Air Force One Supplemental Braking System # SM99627 is the RV side of the Demco Air Force One Supplemental... view full answer...
From the specifications I was able to find online, your Travel Trailer likely has tandem 3500 lb axles with a 2-3/8 inch axle tube diameter. If this is the diameter of your axle tube, we have the perfect solution that could provide a height increase equal to the axle tube diameter plus the thickness of the leaf spring pack.
If your leaf springs are currently mounted to the underside of your axle, you can relocate the spring packs to the top of the axle tube using an Over/Under Conversion... view full answer...
Fundamentally SumoSprings are almost the exact same thing as air bags, they just don't require air so they can't be adjusted. So between the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88240 and the SumoSprings Rebel Custom Helper Springs # SSF-170-40-2, I'd go with the SumoSprings since after they're installed you can just forget about them, and they would require no maintenance.
When you upgrade your suspension on a Class A motorhome you're also... view full answer...
I may have a solution for you, but the numbers provided don't match up to typical Coleman model number parts; Coleman Mach is the brand of RV air conditioners under the RVP (RV Products). My contact over at RVP/AirXcel mentioned that the 0's in your model numbers might be B's, which would match those numbers up to a Coleman Mach 3 Plus. In order to provide an easier installation you'll want to choose a unit that has connections that match your old setup.
Because of this, you won't want... view full answer...
So the short answer is no, there is nothing you can do to your current mounting plate to make another braking assembly fit your current setup. What you have is pretty unique, and when the team and myself took a look at it we were all in agreement that the best step forward is to cut of your current flange and weld on a new one.
Now this is a pretty intensive project and is going to require a special jig that is designed specifically for this, so this isn't something you're going to be... view full answer...
The Replacement Motor for Lippert Power Gear Electric Leveling Jack System item # LC386198 you referenced replaces the electric leveling jack motor for the following Power Gear electric leveling system: 383548, 383768, and 383772. 383778, or 383796). If your 2008 Pace Arrow 38P has one of these systems it will work. If you do not have one of these systems go ahead and email me back with which one you have and I will be happy to find you a replacement motor. view full answer...
We have just the parts you're looking for!
To go with the Sumo Springs # SSF-170-40-2 on the front axle of your 2016 Fleetwood Bounder I recommend using the Sumo Springs Maxim Custom Helper Springs # SSR-187-54-1. I prefer these over the SuperSprings Sway control kit because they'll do a little bit better job of helping with body roll while not stiffening up your leaf spring suspension too much, and they're a great match for the front Sumo Springs. The Sumo Springs are designed to get... view full answer...
There unfortunately is not a database that tells us which specific parts like Leveling systems were used on your 2003 Fleetwood Southwind 37U, but if you can find some identifying information on your landing gear that would allow us to confirm the Replacement Spring Kit for Power Gear Jack # LC359434 will work for you. This particular spring fits on Power Gear Jacks model numbers 359161, 359170, 359364, 359375, 359377, 359384, 359394, and 407120.
I'll also note that if your spring is 16-3/4"... view full answer...
It looks like the 2007 Fleetwood Highlander Niagara is roughly 19-1/2 feet long so I recommend using the Classic Accessories Deluxe PolyPro III Heavy-Duty Pop-Up Camper Cover - 18' - 20' Long # CA80043, which won't be affected by the AC unit on top of your camper. This is a heavy duty cover made of polypro fabric, which will do a great job of keeping your trailer protected with it's triple ply construction. This cover also comes with a nice carrying bag for storage when it's not in use.... view full answer...
I may have a solution for you, but we don't have a database that tells us what leveling system or the size of the feet they have on your coach, so you will need to measure and choose the SnapPad that most accurately describes your jack feet. If you've got 9" round feet on your leveling system then you'll want to use the SnapPad Jack Pads for Class A and C Motorhomes w/ 9" Round Jack Feet - Qty 4 # SP54FR4.
If you've got a different size and shape foot, then there are a number of other... view full answer...
Go To Results