Yes, the photo on our web page is of the actual hitch. If you mouse over the image links below the title you will see more actual pictures of the hitch and the display image shows the hitch from the underside of the vehicle. The Photo of the Draw-Tite Class III Trailer Hitch, item # 75148, is also the actual photo but we have not had the opportunity to photograph it on the vehicle. We also have a video installation of the Curt Class III Trailer Hitch on a 2007 model Nissan Murano (see link).... view full answer...
The HWT Aluminum Hi-Spec Series 6 Trailer Wheel # AM20455 does not include lug nuts but we do offer suitable stainless-steel lug nuts as separate items, part # AM26NR. An adjustable Telescoping Lug Wrench # LW405 is also offered. For your reference I have linked a product review video for these HWT wheels. view full answer...
No, the etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10 Diameter - 5 on 4-1/2 Item # AKHD-545-35-EZ-K that you referenced comes as a single hub and drum assembly so you need to purchase 2 of them for each axle on your trailer.
Attached is an installation video that you can check out. view full answer...
Hopkins 7-way/4-Pole Vehicle Connector kit # HM40975 consists of the 4-and-7-way connector, a mounting bracket and hardware. No relays are included since this kit is intended for use on vehicles equipped with a factory 7-way tow package.
The similar kit # N40975 includes relays.
On a Titan without any factory wiring you can add trailer harness (that is completely independent of any included or missing factory components) by installing 4-pole powered harness kit # C59496 which plugs in... view full answer...
No separate or additional converter is needed for the Tow Ready T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118361 for your 2003 Nissan Pathfinder. All plugs and converters needed for the wiring harness to combine your vehicle's separate wiring system are included. You will simply need to plug the harness into your Pathfinder's wiring behind the left and right vehicle taillights, as seen in the video I've attached.
In the video, our installer is able to ground the... view full answer...
You are correct, the 4 bulbs included with the Putco # P980070 dome light kit will replace both map lights and the front and rear dome lights. view full answer...
There is a ball mount with 1-7/8 inch, 2 inch and 2-5/16 inch hitch balls, though the Channel Style Adjustable Ball Mount # C45900 you asked about does not have a separate 1-7/8 inch hitch ball attachment.
Instead, I recommend checking out the Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches # D900 which has a 1-7/8 inch hitch ball with 6,000 lb capacity, a 2 inch hitch ball with 7,500 lb capacity and a 2-5/8 inch hitch ball with 10,000 lb capacity. This ball mount has a maximum... view full answer...
I completely understand wanting to know exactly what you are ordering before it arrives. The SportRack Semi-Custom Roof Rack for Naked Roofs # SR1002 is a complete kit and is confirmed to fit your 2011 Nissan Maxima.
It comes with 2 cross bars that are 50 inches long, 4 feet to mount the bars to you roof, 2 per cross bar, and an allen wrench to tighten everything up. view full answer...
Nope, the trailer wiring is a separate purchase for your 2017 Nissan Rogue Sport, and does not come with the etrailer Trailer Hitch Receiver # e79YR.
The correct trailer wiring harness for your '17 Rogue Sport is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56397. view full answer...
The bolts that hold the head to the shank for the Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-0600 are 3/4-10 x 5” Grade 5 Bolts. If you're asking about the size of the hitch pin then that would be 5/8".
We do have the Replacement Hardware Kit # FA92-02-9600 which includes the hardware needed to connect the head to the shank, as well as a replacement hitch pin. view full answer...
Yes, all of our hitches come with all the necessary mounting hardware. The drawbar, pin and clip and any accessories are sold separately.
I have linked instructions and a video installation of the Draw-Tite Trailer Hitch # 75282. view full answer...
The Draw-Tite # 75282, which is a confirmed fit for your 2018 Nissan Frontier, does not come with a bracket for a 7-way. What you want to use is Mounting Bracket and Installation Hardware # PK12711U; I've added links to a video review of this bracket as well as a link to a video of this hitch being installed on an '18 Frontier. view full answer...
Yes, the # RHK for the Draw-Tite # 75186 will include the brackets shown in the hardware photo on the product page, so you'll get the parts you're looking for. view full answer...
The Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style, Post Style, or Saddle - 2 Kayaks or SUPs # TH890000 comes with both racks (one for each crossbar) to stabilize your kayaks as well as tie downs for 2 kayaks. I've attached a video of the system for you to show everything that comes in the kit and how to install it. view full answer...
While we have an option for you, the 25 foot Hopkins Endurance Easy-Pull Harness with 4-Pole Flat Trailer Connector - Trailer End # HM38136 does not come with a dust cap included.
There is one that does, though it is much shorter, the 12 inch Hopkins Endurance Easy-Pull # HM48114.
I have added links to a couple video reviews and installs of this trailer connector for you to check out. Additionally, I also highly recommend using Dielectric Grease for Electrical Connectors # 11755 to help... view full answer...
The Timbren Suspension Enhancement System # TNRXT4 you were looking at for your 2002 Nissan Xterra do come as a pair and include the vehicle specific mounting brackets and hardware needed for the install.
I included a video of the # TNRXT4 for you to take a look at. view full answer...
The Curt Trailer Hitch # C11349 does not come with wiring for your 2014 Nissan Sentra SV but if you are needing wiring you'll just need the Curt # C56205.
To complete your towing setup you'll also need the Curt Ball Mount # C45521 with the Pin & Clip # F-4 and either a 1-7/8" # A-80 or 2" # A-82 hitch ball.
We haven't had the chance to install any of these parts yet but I'm linking the instructions for you to check out. view full answer...
The Malone EcoLight Sport Trailer part # MAL43FR comes with eight half arm brackets, everything needed to carry two kayaks. The first photo shows the complete trailer and what it will look like assembled. In order to use this trailer with a 7-way trailer connector, you can use the 7-Way to 4-Flat Adapter part # 47345. view full answer...
The Draw-Tite # 75282 does include all the necessary hardware and is confirmed to fit your 2016 Nissan Frontier. I've linked an install video for you.
If you're going to be towing a trailer you'll also need a ball mount, hitch ball, pin and clip, and trailer wiring.
A wiring harness that will fit your truck is # C56225. This will provide a 4-way trailer connector and installs by plugging in to a connector beneath the vehicle. Then connect the included jumper harness with relays into... view full answer...
I have confirmed that the EVO Formance Spectra H4 # CM93356 are confirmed as replacement headlight bulbs for your 2000 Nissan Maxima.
Additionally, after speaking with my contacts at EVO, the additional lights that are included with the replacement headlight bulbs are T10 Style bulbs. This style of bulbs are not designed to be used as replacement for OEM fog light bulbs.The T-10 bulbs work great for as any in-dash light bulb replacements, side, marker lights, interior, or license plate... view full answer...