Yes, all the needed hardware and brackets to install the DeeZee NXc Running Boards will be include in the package.
The DeeZee # DZ16201-16224 that you referenced will fit 2015-2017 Ford Edge. view full answer...
Yes, the K-Source Custom Towing Mirror Set # KS61183-84F is a pair of two mirrors that installs using the factory connections for electric, turn signal, and puddle lamp functions. It also uses the same mounting points as the factory mirrors.
Please note that your original stock mirrors must have all the same electrical functions as these mirrors. You cannot add functions not already supported by the stock equipment and wiring. view full answer...
The Tekonsha P3 Brake Controller # 90195 comes with a universal wiring harness. It has a plug on one end that will plug into the rear of the brake controller and the other end of the harness will have 4 wire leads that would have to be hardwired to your 2010 Ford F-150 Super Crew.
If you order the Tekonsha Brake Controller with Wiring # 90195, this part will be the P3 brake controller with the Tekonsha Ford F-150 Wiring Adapter # 22292. This will give you the wiring adapter that will plug... view full answer...
Here are the outlets you will get with our generator # 333-0001-2:
(1) 120V 20-amp
(1) 120V 30-amp L5-30R
(1) 5V 2.1-amp USB
We provide a TT-30R adapter so you will not have to purchase the adapter, but if you do not have a power chord for the 30 amp connection, you will need to grab one. This one is 25' long so you can keep your generators far away from whatever your powering to keep the noise down.
I've included a couple videos if you would like to learn more! view full answer...
The WeatherTech All-Weather Rear Floor Mat you mentioned, part # WTW274TN is a two-piece set, one mat for each side of the transmission hump. view full answer...
For the Aries steps that fit your 2007 F-150 you will use kit # AA4504 which consists of 4 brackets and hardware. You can see this kit in the linked photo.
The Aries Custom Fit Mounting Bracket kit # AA4507 that you referenced works with the 6-inch oval tube steps that fit the Ford F-250/350/450/550 Super Duty trucks. view full answer...
Trailer tail light # STL42RB has reflective properties but I recommend # STL43RBX. The mounting ring around this light is a reflective lens rather than just a black ring like with # STL42RB. I also recommend wiring harness # A47PB to plug into the back of the light. view full answer...
The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # C79KR does not come with a mounting bracket.
You can use the Mounting Bracket # 18144 as well as a No-Drill Mounting Bracket Short # 18140 or Long # C57202 for an easy installation that does not require you to drill into your trailer hitch receiver.
I have attached a video of these two products being installed that you can reference. view full answer...
K-Source Snap & Zap Custom Towing Mirrors # KS81850 are both flat glass. Visibility does not seem to be an issue though since the mirrors extend further than stock mirrors and the flat glass makes the view seem magnified compared to convex glass of a stock mirror.
You could use 2 of universal mirror # 11953 which has a flat glass section and convex section for a wider view. I have linked videos on both mirrors for you. view full answer...
The Thule # TH903202 EasyFold XT bike rack won't require an additional hitch lock, as the shank that slides into the hitch on the vehicle features an integral locking knob that serves to tighten up the shank/hitch connection so the rack doesn't move around in the hitch. The cradles that hold the bike frame are also lockable, and all the locks are keyed alike so you won't need multiple keys.
I've linked to a product demonstration video for the EasyFold bike rack, and have provided a photo... view full answer...
The Bauer Products T-Handle Lock for Small Truck Caps # BA97VR comes with the locking T-handle and key, 1 nut, 1 spacer, and the metal latch piece. This handle has a 5/16" square shaft so you would need the corresponding nut and spacer. For a latch, we do have the Universal Cam for T-Handle or L-Handle - 2" # 37210925. This measures 2" long and fits most square shaft operating handles. view full answer...
Excellent question, and there is anti-corrosion protection for the aluminum bed of your 2018 Ford F-150 that comes with the B&W base rails and install kit that fits your truck, though it is not in the form of shims. What the kit comes with is a roll of polypropylene tape that is used for the parts of the kit that touch the bed. The correct fit for your '18 F-150 is the following:
- B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches # BW39FR
I have added a cut out... view full answer...
The DeeZee Red Label Truck Bed Toolbox, # DZ8546B, comes will all of the hardware required to install the tool box. DeeZee includes 4 sheet metal screws that hold the bottom of the toolbox to the bottom of the truck bed. If you would like to substitute hardware or use additional hardware, that would be acceptable as long as you have at least 4 screws or bolts holding the toolbox to the bed no smaller than 1/4 inch in diameter.
My personal recommendation would be to use bolts, washers... view full answer...
Yes, the Cipa Custom Fit Towing Mirror, # 11602, passenger side, and # 11601, driver side, come with a protective soft strip that goes between the wedge and the factory mirror to protect the factory mirror from getting scratched. I have made a video for you showing the strip.
These mirrors are designed to fit the 2000 Ford F-150 models that have contour mirrors. If you are not sure of the mirrors you have, take a look at the product page for the Cipa mirrors and scroll down. You will see... view full answer...
Yes, the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider part # DM8550034 does indeed come with the side plates that are shown in the attached images. These side plates are used to install the hitch on a set of above bed industry standard rails like the Demco Hijacker Premier Series Above-Bed Base Rails and Custom Installation Kit part # DM8552028-71 which are a confirmed fit for your 2018 Ford F-150.
I have attached a review video of the Demco Hijacker Autoslide for you as well. view full answer...
That is correct. The Longview Custom Slip-On Towing Mirrors part # LVT-2300-C includes slip on mirrors for the driver's and the passenger side of the vehicle. The price does not include shipping. If you click the provided link, you can see a video showing the mirrors being installed on a 2015 F150. view full answer...
The Equal-i-zer Weight Distribution System # EQ37140ET that you referenced does come with a shank and a 2-5/16" hitch ball so you will not have to purchase anything else for your towing setup. The only other thing that you may want to get is a 1-7/8" thin walled socket like part # EQ70-00-4800 to help make installing the hitch ball easier.
You will want to make sure that the Total Tongue Weight (TTW) of your towing setup fall in the middle of the Tongue Weight (TW) range of this Weight... view full answer...
Husky Custom Base Rails and Installation Kit # HT32858-686 is a complete installation kit that includes the below the bed brackets, the above the bed rails, and all of the hardware for installation. I have included a link to the installation instructions for you. view full answer...
I'm assuming you're speaking of the Truxedo Truxsport, part # TX277601. The aluminum clamps and all needed installation hardware is indeed included with the tonneau cover. view full answer...
My contact at Edge Products suggested a different tuner for your 2007 Ford F-150 Triton 4.6L V8, their Evolution CS2 Performance Tuner # EP85350. This will allow you to read engine oil and transmission fluid temps and RPMs without adding any other parts.
The Edge Evolution Programmer for Ford Triton 4.6L V8s # EP15051 does not include temperature probes for transmission fluid or engine oil but it does allow reading engine RPMs through its connection at the OBD-II port. On your truck oil... view full answer...