The Pace Edwards Switchblade Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black # 311-SWFA06A29, which fits on your 2020 Ford F-150, weighs about 70-lbs, so it's effect on the payload is minimal. The installation/removal process is also relatively easy because of the lighter weight for a retractable cover and should take about 10 mins. view full answer...
Yes, the TorkLift 30K SuperHitch Magnum Trailer Hitch Receiver # TLF1003-30, confirmed to fit your 2007 Ford F-550 with the 34-1/2 inch Cab and Chassis frame, will include the main hitch receiver, hitch reducer sleeve (2-1/2 to 2 inch), mounting brackets, pins, clips and all the necessary hardware to install it on your truck.
Accessories like a shank # TLM9000, ball mount # ED208, or hitch lock # e98880 would be sold separately. view full answer...
Yes it does - the Lippert Thin Shade Complete Window Kit # LC806621 does come with the Window Release Keys (which are part # LC429436), as you can see by the cut out of the manual I added for you.
The Thin Shade Window Kit # LC806621 also comes with the inner frame, outer frame, window glass and shade. view full answer...
The Organized Obie RV Bunk Bed Safety Net for Children - Qty 1 # OBE94FR does indeed include the brackets as well as all the needed hardware to get fully installed. The only other thing you will need to get this installed is a drill. view full answer...
I am happy to inform you that all of the mounting hardware is included with the Aries Round Nerf Bars for the 2019 Ford Ranger, part # AA69FB.
The installation instructions are linked below. In them, you will see all of the parts. view full answer...
You are correct that the Curt TruTrack 2P Weight Distribution System w/ Sway Control # C69JR comes with a 2-5/16" hitch ball but it is not pre-installed. This is something directly from Curt and while we aren't able to pre-torque hitch balls for weight distribution systems prior to shipping them out, you should be able to rent one from your local auto parts store or have a local shop install the hitch ball for you.
For a similar system that does come with the hitch ball pre-installed I... view full answer...
The Draw-Tite Hide a Goose Gooseneck Hitch you referred to, part # 9465-37 includes the hitch, the under bed mounts and all necessary installation hardware.
For beds shorter than 6 foot, an offset ball, part # 19308 would most likely be needed to increase the distance between the rear bumper corners and the front of the trailer.
To install a 7-way trailer connector in the truck bed, use part # 41157.
I've linked you to some product description videos and an install video featuring the... view full answer...
The Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option part # TV94FR as you mentioned does not come with hardware, most customers just use the hardware from the existing jack. That said, I don't have any exact hardware requirements for this. I recommend just taking a trip to the hardware store and picking up some bolts, nuts, and lock washers which are grade five and fit into the existing holes. view full answer...
The Titan Chain Alloy Snow Tire Chains - Diamond Pattern - Square Link - 1 Pair # TC2526 comes with the chains, the plastic case, and the couple of links you see in the product page photos. These chains are made of manganese nickel alloy steel so they are very strong and durable.
If you need extra links at any time in the future, the 2-Piece Chain Link Set for Titan Chain Diamond Pattern Alloy Tire Chains - 0.218" Thick # TCRK-2 is also available for purchase. To make repairs you may... view full answer...
The Draw-Tite Class III Max Frame Round Tube Receiver Hitch # 75112 referenced in your question, which is confirmed to fit your 2001 Ford Explorer Sport Trac, includes the hardware, bolts, washers and everything else needed for installation.
I have attached an installation video on a 2002 Explorer Sport Trac as well as the written instructions for you to look at. view full answer...
For your 2013 Ford Flex with a factory 7-Way, the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 is a great choice. As you mentioned in your question, the Plug-In Wiring Adapter # 22292 is all that you will need to install the unit. One end of the adapter will plug into the controller and the other end will connect to the built-in harness beneath your vehicle's dash.
These are separate part numbers that are combined when going through the vehicle fit guide. You will need both part... view full answer...
Everything is included to mount the Under-Bed Rail and Installation Kit # RP87FR to your 2017 Ford F-350.
The Only additional item you may need is the Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch # RP27FR. To determine if you need this kit or not, you will need to verify that your F-350 has the inner frame brackets already installed. If they are not present you will need the # RP27FR. Having these inner frames brackets allow you to... view full answer...
Flat towing base plates like the Blue Ox kit # BX2654 for the Ford Focus, the item that you referenced, do not include wiring. The reason is that there are several different types of products to provide the electrical/lighting connection between a motorhome and towed car and some owners may have a preference for one or the other.
For example, for the various versions of the 2015 Ford Focus we have flat towing wiring products (shown on the linked page) that include inexpensive magnetic... view full answer...
The Hide-A-Goose Underbed Gooseneck Trailer Hitch with Custom Installation Kit # 9468-94 comes with safety chain u-bolts, like are shown in the accompanying photo. Those u-bolts do come with the kit and if you take a look at the linked installation instructions you can see how they install. view full answer...
Yes, the center box section of the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1100 that you referenced is indeed part # BWGNRC800 on our site. If you let me know what the year/make/model is for your pickup I can confirm what the correct B&W gooseneck hitch is.
I do recommend also installing a 7-Way like the Bargman # 50-97-410 in the bed of your pickup if you don't already have one. This simply tees into the US Car Connector behind the 7-Way that currently sits near your... view full answer...
Yes, the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider part # DM8550034 does indeed come with the side plates that are shown in the attached images. These side plates are used to install the hitch on a set of above bed industry standard rails like the Demco Hijacker Premier Series Above-Bed Base Rails and Custom Installation Kit part # DM8552028-71 which are a confirmed fit for your 2018 Ford F-150.
I have attached a review video of the Demco Hijacker Autoslide for you as well. view full answer...
The item you selected, Optronics Trailer Clearance Light, part # MC32AB, includes a # 194 size bulb already installed.
In the future, if you need to replace the bulb, the lens is removable. For a replacement bulb we have the Replacement Side Marker Light Bulb # 194, part # A194B. For a replacement lens, we have the Replacement Amber Lens, part # A32AB. view full answer...