The Firestone Coil-Rite Air Helper Springs, part # F4124, would be the correct part number for the rear of your 1996 Toyota Land Cruiser if it is a four wheel drive model. They do not offer any system for the front of your vehicle. I would not recommend to try to use the rear springs on the front of your vehicle. I am including a link to the installation instructions on the Firestone rear springs.
Firestone does offer lift spacers for vehicles that are lifted but they will not work with... view full answer...
The Front Mounted Trailer Hitch Universal Spare Tire Carrier # 6715 can absolutely be used on the rear trailer hitch receiver of your vehicle. You can see this on the back of a camper in our customer photos on the product page. The manufacturer named it but it absolutely can be used for a rear hitch receiver. You may in certain states need to relocate your license plate so that is likely why they listed it as a front mount. The other issue is the cargo access, so you may also consider... view full answer...
While we do have an option for a heavy-duty tow bar that will work with the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick # RM-035-1, these adapters are only designed for use with Roadmaster tow bars, so they won't work with the etrailer tow bar you referenced.
That tow bar has a 10,500 lb capacity, so it seems like you are wanting a heavy-duty tow bar, and there is an option from Roadmaster with a high weight capacity that will work with these... view full answer...
If you're planning on installing the awning to the Yakima OffGrid # Y07138 then the SlimShady like part # Y96VR is what you want to go with as it uses clamps to secure to the crossbars on your vehicle. The Rhino-Rack Sunseeker gives you more options to add extensions to the awning but it installs via T-Slots on your roof rack so it can't be installed on the OffGrid directly.
As far as operation and ease of use goes these awnings are about the same so it really boils down to if you want... view full answer...
The soft tops for your 1995 Jeep YJ like part # B5159915 are not designed to fit your 1969 Toyota Land Cruiser FJ40.
The top that is designed to fit your FJ40 is the Bestop Supertop Soft Top, part # B5146415. This Black Denim system includes the fabric top, support bars, hardware and Belt-Rail system and is designed to fit FJ40 models from 1964 to 1984. view full answer...
The Toyota Land Cruiser Prado wasn't available in the US market, so our hitch manufacturers have not tested the fit. This being said, according to my research, the Lexus GX 460 is identical, so a hitch for a 2013 Lexus GX 460 like the Curt # C13043 should fit. I'd recommend looking under the vehicle for the mounting holes on the underside of the bumper beam. If the hole spacing matches what's shown in the provided photo, the # C13043 would work well for you.
If you click the provided... view full answer...
Unfortunately a weight distribution system cannot be used on a trailer with a breakaway tongue. The breakaway style tongue cannot handle the additional pressure that is applied to the tongue by the weight distribution system when distributing weight and controlling trailer sway.
If you are having trouble with the rear of your 1999 Toyota Land Cruiser sagging when towing your boat trailer, then you may be interested in the Timbren Rear Suspension Enhancement System, # TTORSEQ. I have attached... view full answer...
The Thule # TH859XT Canyon is indeed a fit for your Land Cruiser, but just to be sure I phoned my Thule representative who confirmed it for me.
Due the the height of the vehicle, many of our customers find that a tire mounted step like part # HE4040 makes accessing their cargo safer and more convenient.
You can see a product demonstration video by clicking the provided link. view full answer...
The Reese Steadi-Flex # RP66559 is indeed surge brake compatible; the bars do allow enough movement within the clamps so the tongue can actuate the brakes. This is why weight distribution systems with brackets are compatible with surge brakes but Reese systems that use chains hangers are not. There is not adequate horizontal movement in those systems to activate surge brake systems.
The Steadi-Flex # RP66559 has a total tongue weight range of between 500 lbs and 1,000 lbs and is likely... view full answer...
Yes. The Curt Echo Brake Controller # C51180 works with your 2016 Toyota Land Cruiser with a 7 pin connector. The great thing about this brake controller is that it connects via Bluetooth to your Android (4.4 OS or newer) or iPhone (8.0 or newer OS) so that you don't have to worry about installing anything in/under your dash or cabin. The control module itself mounts directly into your 7-way trailer connector, so you are able to use a different vehicle to tow the trailer if needed, as long... view full answer...
There are two options for installing a set of Off-Road Timbren bump stops at the front of your 1997 Toyota Land Cruiser and the correct option just has to do with what series you have:
- 70 Series # TABSTOFLC1
- 80 Series # TABSTOFLC1A view full answer...
It looks like the stock tire size on the 1994 Toyota Land Cruiser is 275/70-16. I spoke with my contact at Draw-Tite and he stated that trailer hitch # 41015 is designed to fit on a vehicle with a stock size spare tire. Anything larger would not fit.
A 315/75R16 is going to be too large for the hitch to fit properly. If you could carry the tire somewhere else, in the cargo area or on the roof, you could install the hitch. I have included a link to the installation instructions for you.
To... view full answer...
After consulting with Edge Performance, the Edge Insight CS2 # EP84030 is compatible for your 2000 Toyota Land Cruiser Prado as long as it is equipped with an OBDII diagnostic port. This product provides a full-color screen that displays up to 8 parameters of your vehicle at once, such as engine and transmission temperatures, speed, RPM, etc.
Please note while this item may help you with your fuel economy by tracking and improving certain driving habits, the Insight only displays data... view full answer...
The brake control plug in for your 2016 Toyota Land Cruiser is underneath and to the left of the steering column, probably taped to another harness near the emergency brake pedal. That harness may also be tucked up and above the emergency brake pedal or behind the kick panel left of the pedal.
That harness is what you will plug in Wiring Adapter # C51362 so you can use your Curt Spectrum Trailer Brake Controller # C51170. view full answer...
The Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 4.3" Screen # FOS43TASF or the 5 inch # FOS05TASF are all confirmed to fit your travel trailer mounting bracket. The difference besides screen size is the 5 inch option allows for additional cameras with quad view screen and have a microphone for hearing behind you when desired. The 4.3 inch monitor does not allow for these additional features.
Sometimes the older prewired systems were wired only for power when... view full answer...
The Yakima LockNLoad Platform Roof Tray # Y05045 is actually designed to do exactly what you are wanting, which is mount directly to the raised side rails of your 2017 Toyota Land Cruiser without crossbars.
To do so you'll also need the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR and LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2. view full answer...
Yep!
The Thule Motion XT # TH629907 you were looking at will indeed fit the factory crossbars on your 2016 Toyota Land Cruiser.
You will need to measure from the center of the front crossbar to the line where the hatch and roof meet, and you'll need a measurement of more than 55" to be able to open the hatch without it hitting the box. view full answer...
The square crossbars of the Malone Megasport trailer part # MPG535 are compatible with Thule accessories that were designed to fit square bars. view full answer...
I have a solution for you. While the Pioneer Platform # RR75TB can be used for carrying kayaks, the Thule Hullavator # TH898 is not confirmed to fit the channel slots of the platform. That said, the Thule Hullavator would not be an option since you cannot install standard crossbars on top of the tray, only the Rhino-Rack Accessory Bars part # RR43138B (which is not confirmed to fit the Hullavator channel mounts). That said, you could add the Roller Accessory part # RR43131 for load assist.... view full answer...
I do have an airbag suspension enhancement setup for your 1987 Toyota Land Cruiser's rear axle but I would strongly recommend replacing both front and rear leaf springs first. The leaf springs are a critical part of your vehicle's suspension and without them working properly you run the risk of further damage to other suspension components. Our suspension enhancement kits are designed to aid the factory suspension not substitute or replace components.
The only airbag kit we have for your... view full answer...
Go To Results