The Roadmaster Tow Bar Adapter # RM-032 is compatible with the Roadmaster Crossbar-Style Base Plate Kit # 711-4 and compatible with the following Blue Ox tow bars:
Adventurer, Avail, Alpha, Acclaim, Allure, Aventa, Ambassador, Alexxa, Trion, Aventa II, Aventa LX, and Aladdin.
If you have a different Blue Ox tow bar let me know and I can find the correct adapter. view full answer...
If you don't have trailer wiring, I recommend the Upgraded Circuit Protected Tail Light Converter Hardwire Kit with 4-Pole Connector (Includes Tester) # 119178KIT. This kit will give you the adaptation needed to make the 3 wire system with separate turn and stop lights in your Miata work with a 2 wire system that is standard tail light wiring on a trailer. This has a short circuit protection safeguard against electrical shorts and mis-wire situations. The circuit tester will help you... view full answer...
The Curt wiring harness # C56175 that you referenced is a fit for the 1997 Mazda Miata so long as your Miata does not have LED taillights. Given the model year of the vehicle it likely uses standard incandescent bulbs which are compatible with this trailer wiring harness. This kit includes zip ties and quick-splice connectors.
Wiring is best done with a tester like # PTW2992 to enable you to confirm the function carried by each wire on the Miata. Wire colors cannot be relied upon for identifying... view full answer...
According to Magnaflow, the Stainless Steel Direct-Fit Catalytic Converter, # MF23684, will fit your 1990 Mazda Miata, but it is not CARB (California Air Resource Bureau) compliant. At this time we do not have a catalytic converter for your Miata that is CARB approved.
I have linked you to our series of FAQ articles about Catalytic Converters. view full answer...
The Kuat Beta 2 Bike Rack, # B202-114, will fit on your 2001 Mazda Miata. The trailer hitch on your Miata is likely a Class I trailer hitch with a 1-1/4 inch receiver, which is compatible with this bike rack. The Kuat Beta is an excellent choice because the tongue weight capacity of a Miata is very low. At 13 lbs, you will not have to worry about the bike rack taking up too much weight.
I have attached a demonstration video of this bike rack for you to check out.
If you plan on carrying... view full answer...
Roadmaster replacement crossbar/adapter # RM-025 will fit the XL base plates you have, # 711-4. But in order to make the XL arms easily removable with this bar you will also need Quick-Disconnects # RM-201.
I took some measurements of the bar and have included a picture showing them. The distance from the center between 1 set of tabs and the center of the other set is 30-5/8 inches. view full answer...
The Roadmaster Crossbar-Style Base Plate Kit part # 711-2 or part # 711-4 which are fits for a 1991 Mazda Miata will work with a Blue Ox tow bar if you use adapters, the RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter part # RM-033 with Roadmaster Tow Bar Quick Disconnect Kit part # RM-201. view full answer...
Yes, both the Roadmaster XL Base Plate Kit # 711-4 and the Classic Base Plate Kit # 711-2 for your 1994 Mazda Miata are compatible with all Roadmaster tow bars. I recommend going with the XL # 711-4 because it has removable draw bars which will give you more of an OEM look when you are not flat towing it.
Keep in mind that aside from the base plate kit you will need the tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter.
One... view full answer...
We do! For your application you first need to install the Curt Trailer Hitch Receiver # C11749 on your 2003 Mazda Miata Convertible. Once installed this allows us to use a hitch mounted bike rack.
If you don't already have a bike rack then I recommend the following for different styles:
- Hanging Style - Kuat Beta # B202-114
- Platform Style - Hollywood Racks Destination # HLY94FR
Both racks are lightweight for their style and they are rated for use with a Class I hitch receiver like... view full answer...
Yes, the Roadmaster Tow Bar Adapter # RM-032 will fit your Roadmaster Crossbar-Style Base Plate Kit # 711-4. This baseplate adapter fits the XL style of baseplates, which the # 711-4 is classified as. view full answer...
The correct base plates to flat tow your 1990 Mazda Miata are the Roadmaster XL # 711-4. These base plates will work with your Roadmaster Falcon All Terrain tow bar # RM-522 using the included quick-disconnects and crossbar. You will also need safety chains, Roadmaster # RM-643 for 68" chains or # RM-645-76 for 76" chains.
For lighting, you can either use magnetic tow lights # TL21RK if you do not plan on towing your Miata often, or Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154... view full answer...
Yes, the Thule Passage 2 Bike Carrier, part # TH910XT, is a confirmed fit for your 1990 Mazda Miata. It has a total weight capacity of 70 lbs for 2 bikes. I am including links to a video review and the installation instructions on the Thule bike carrier.
If you are going to be carrying womens or childrens bikes that do not have the horizontal bar at the top of the frame, you will want to use the Thule Bike Adapter Bar, part # TH982XT. It attaches to the center seat post and to the handlebar... view full answer...
The Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 711-4 are compatible with quick disconnects and almost all Roadmaster tow bars, including the Roadmaster Tracker Tow Bar - 2" Ball - 5,000 lbs # RM-020. view full answer...
Legally this will depend on where you are going to be operating your motorhome but the short answer is yes you will need a supplemental braking system for your 2000 Mazda Miata. I recommend going with a portable system like the Blue Ox Patriot # BLU37TR as you will be able to use it in different vehicles you may tow. Since different states and providences can have different laws regarding either the amount of weight or the required braking distance the safest bet is to just get the system.... view full answer...
The Saris SuperClamp EX Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount, part # SA4025F, you attached to your question is an excellent choice. It has a rise of 5" from the shank. The 5" in shank rise should be enough for your bike tires to avoid being heated by the exhaust. You will not find a more significant rise without adding a hitch extender, but keep in mind when you add a hitch extender you reduce the maximum tongue weight of your bike rack by 50%.
I have included a... view full answer...
When towing a vehicle with a tow bar you will need a tow bar, the required base plates and lights for the vehicle being towed. Also recommended are safety cables.
For your 2002 Mazda Miata the RoadMaster Tracker Tow Bar - 5,000 lbs, # RM-020, will work with an additional base plate kit. You will need the Roadmaster XL Base Plate Kit, # 711-4, to attach to your car for the tow bar to connect to.
The brackets attach to your car and the visible portions of the brackets can be removed when... view full answer...
The Curt Class I Trailer Hitch # C11749 and the Hollywood Racks Destination Bike Rack # HLY94FR is a perfect combination for your 2003 Mazda Miata!
We don't have the hitch mount bike racks fitguided because these are essentially universal fits - the only time a hitch rack won't fit is when it comes to bumper clearance but most of the time this isn't a factor, and since the Destination has 9-1/4" of clearance when folded up I don't see this being an issue at all for you. view full answer...
The design of the Curt Vertical Trailer Hitch Receiver w/ Drawbar part # C11746V was designed specifically to promote the best ground clearance possible. I apologize but I was unable to come up with any pictures of it installed. I checked on our site, checked with Curt, and checked the web but came up dry.
One thing to keep in mind is that this hitch is really not the one to use for a bike rack because of the receiver design. There would be no way to connect the rack to the hitch.
For... view full answer...
The adapter # RM-032 is a match for the EZ4 base plate kit that fits your 2016 Jeep Wrangler Unlimited, part # RM-521448-4. There is no adjsutment to be made.
If you need other parts to setup the Jeep to be towed I recommend using the Hopkins wiring kit, part # HM56200, for lighting. It plugs in behind the Jeep's tail lights and provides a 4-way at the front to connect to the RV. You also need a Brake-Lite relay, part # RM-88400, to keep the Wrangler's lights from overriding the RV's.... view full answer...
Yes, the Roadmaster Crossbar-Style Base Plate Kit # 711-4 for your 2001 Mazda Miata is compatible with both the 2" Hitch Ball # RM-501 and 2-5/16" Hitch Ball # RM-504 versions of the StowMaster tow bar. I reached out to my contact at Roadmaster who did say that it will fit but he is afraid that you will be putting too much weight at the front of your Miata since the tow bar stows there. He recommended going with a motorhome mounted tow bar like the Falcon 2 # RM-520 instead since it stores... view full answer...
Go To Results