The Honda sensor kit you're talking about is a relocation kit so the hands-free liftgate will function as normal with a hitch installed. You can install either the Curt # C13421 or Draw-Tite # 76290 hitch on your 2022 Honda Passport and it shouldn't completely cover those sensors though. You should be able to just kick to either side of the receiver for the sensors to pick up your foot as opposed to swiping under the bumper like normal.
The adapter kit is separate from the OEM hitch (although... view full answer...
To install a Yakima roof rack on your 2021 Honda Passport you need at least 50" JetStream Crossbars # Y00425 and the TimberLine Towers # Y33TR or the Yakima TimberLine FX Roof Rack # Y78UV that has ore or a clamp style connection as opposed to the straps.
If you don't have either of these setups then I can't recommend using an alternative setup even if you're able to get it to fit.
A while back we had someone fit a roof rack to a vehicle and while it technically "fit" and stayed put,... view full answer...
Yes, the Curt Trailer Hitch Receiver # C13421 is the correct hitch for your 2023 Honda Passport to carry your bike rack. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories like your bike rack. view full answer...
Though the Curt # C13421 will definitely fit your 2021 Honda Passport, installing any hitch may interfere with Hands-free Liftgate sensors and functionality may be very limited or possibly lost. However, it is exceptionally rare for the use of the sensor to be completely lost. Typically you will just need to mess with it a little to find the spot where your foot will activate it and you will be good to go. If you check out the install video I included, the sensor is talked about as well. view full answer...
Yes, the Rhino-Rack ROC25 Roof Rack # RR44QJ is exactly what you need for your 2019 Honda Passport bare roof.
This has a weight capacity of 165 lbs and comes with everything you need to install this on your vehicle.
Attached is a review video for you to check out. If you let me know what you plan on using the roof rack for I'd be more than happy to make a recommendation for you! view full answer...
I would be happy to help you set your 2019 Honda Passport up with a functional 7-way connector. The Tekonsha T-One Vehicle Wiring Harness for Factory Tow Package item # 118291 you were referencing will not work with an existing 4-way connector or function as designed by splicing it in. This adapter plugs into your vehicle's factory tow package wiring harness. The converter plugs into the factory wiring harness in your rear cargo area, on the driver's side. This adapter only works if you... view full answer...
I recommend the Curt Echo part # C51180 for the 2019 Honda Passport because of its easy installation. There are not any factory brake controller adapters available for the 2019 Honda Passport as of yet. I took a look at your owner's manual and a traditional brake controller like the Primus part # TK90160 would have to be hardwired from the brake controller to the 4-pin gray connector under the instrument panel near the top of the parking brake pedal until there is an after-market adapter... view full answer...
The Draw-Tite Max-Frame Trailer Hitch # 76290 that fits your 2019 Honda Passport can interfere with the hands-free liftgate feature. You will likely have to kick your foot to one side of the receiver as opposed to the middle or it could be lost.
This is a Class III hitch with a 2 inch receiver and a 6,000 lb towing capacity with a hefty 900 lb tongue weight capacity though you should always be sure to verify your Passport's towing capacity in your owner's manual.
I have added a link to... view full answer...
Yes, we have a Curt hitch for you. The Curt Trailer Hitch Receiver # C13421 is confirmed to fit all models of the 2022 Honda Passport. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
The Curt T-Connector Vehicle Wiring Harness # C56291 is confirmed to fit all models of the 2022 Honda Passport and will provide... view full answer...
When it comes to hitches that we have available for your 2020 Honda Passport that can be used with a weight distribution system, the Draw-Tite # 76290 is a confirmed fit for your new Passport and can be used with weight distribution systems like the Equal-i-zer # EQ37100ET. When using a weight distribution system with this hitch, the maximum tongue weight capacity is 900-lbs and the maximum towing capacity is 8000-lbs.
Since you'll be towing with this hitch, you may need some other components... view full answer...
The etrailer hitch item # e44AR you referenced has the same protrusion from your rear fascia as the Curt Trailer Hitch Receiver item # C13421. These hitches are manufactured by the same company and are identical except for the matte coating on the etrailer hitch over the gloss coating on the Curt. The hitch pin hole on both of these hitches sits 4" inside of your Passports bumper. The end of the receiver is online with the rear bumper of your Passport. I have linked an installation video... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" item # C13421 is a confirmed fit for all models of the 2022 Honda Passport including the Elite.
If you are planning on towing then you will need the Curt T-Connector Wiring Harness item # C56291, the Mounting Bracket item # 18140, and a ball mount kit like the Curt Fusion Ball Mount Kit item # C45154. view full answer...
Yes, the Curt Trailer Hitch Receiver # C13421 is confirmed to fit all models of the 2022 Honda Passport. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories such as bikes racks, cargo carriers and ball mounts.
If you plan to do any towing, you can pick up the Curt T-Connector Vehicle Wiring Harness # C56291 and the etrailer Ball Mount Kit # 989900 to round out... view full answer...
The part you mentioned is just a single crossbar, and is not a fit for a 2020 Honda Passport, but there is an option for a roof rack for a 2020 Passport, so long as you have factory-installed rails that run front-to-back. If you do, the rack that fits is from Malone:
- Malone AirFlow2 Roof Rack # MAL84AR
If you do NOT have raised side rails there isn't a flush-mounted option, but you can still add a high-quality rack from Yakima to your 2020 Honda Passport with the following parts:
-... view full answer...
Yes, it will but you'll lose some functionality by the 2" receiver. All of the hitches available for the 2023 Honda Passport block the sensors by the 2" receiver somewhat. What you will need to do is kick to the left and right of the center to find a spot not blocked.
The etrailer Hitch item # e44AR you were looking at is confirmed to fit your 2023 Honda Passport. It is custom fit and bolts to your vehicle with included hardware. This is a class III hitch with a 2" receiver.
I have... view full answer...
The Konig Self Tensioning Low Pro Snow Chains # TH04115265 are a low profile chain that is Class S compatible- meaning that they are designed for vehicles with limited clearance in the wheel wells. These chains require 10mm of clearance in the wheel well.
I've linked one of our review videos that shows these chains being used on a Jaguar SUV with extremely low clearance in the wheel wells to give you an idea of how low profile they actually are! view full answer...
I always refer to the owner's manual when it comes to safety issues with vehicles and according to my research the online manual for your 2020 Honda Passport says you shouldn't need one but if you want to use one then it needs to be setup properly. As long as the hitch you're installed on your Passport is rated for a weight distribution hitch (WDH) then you should be just fine to use one.
For your application I recommend using the Blue Ox TrackPro Weight Distribution w/ Sway Control #... view full answer...
Both the Curt Trailer Hitch Receiver # C13421 and Draw-Tite Max-Frame Trailer Hitch Receiver # 76290 will have the cross tube that sits behind the removable cover on your 2022 Honda Passport, but the receiver tube itself will still be exposed. This does save you from having to remove the panel and store it when you are needing to use the receiver.
While both the receivers are nearly identical I do prefer that the Draw-Tite # 76290 already has the tab welded on for attaching either a 4-Way... view full answer...
We do have a 2" trailer hitch confirmed to fit your 2023 Honda Passport.
- Curt Trailer Hitch Receiver # C13421
This hitch is made in the USA, has a bolt-on, no-drill installation and has the 2" hitch receiver you are needing. The 2" receiver is the most common size used for hitch mounted accessories like bike racks, cargo carriers and ball mounts. view full answer...
Go To Results