I have a solution for you, but the Westin Sure-Grip Running Boards # 27-6105 are designed to fit a Toyota Tacoma, so they would not work on your 2020 Chevy Traverse. Because of how new your 2020 Chevy Traverse is, there are a limited amount of running board options available for your vehicle but we do have some options.
Have a look at the Aries AeroTread Running Boards w/ Custom Installation Kit - 5" Wide - Aluminum # AA2061030 (black) or # AA2051030 (silver) which offer a no-drill installation... view full answer...
The Curt T-Connector Vehicle Wiring Harness item # C56394 for a 4-way or item # C56393 for a 7-way is what I recommend for your 2020 Chevy Traverse. These are custom fit and quite a bit easier to install when you're putting the hitch on. Just like the Draw-Tite Hitch item # 76184 they require the rear bumper cover to be removed.
If you ever plan on towing a heavy trailer like a camper you will want the 7-way Curt Wiring Harness item # C56393 because it can control trailer brakes. The item... view full answer...
It sounds like you have a 2013 Chevrolet Traverse with flush rails. In order to mount the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs - J-Style, part # S512-S512X, or any other kayak carrier to your vehicle, you'll need a roof rack.
I recommend the Rhino-Rack Vortex Aero Crossbars, part # RRVA137B-2. These are aero-style bars that reduce wind noise and drag. To mount them to your flush rails, you'll need the 2500 Series Legs, part # RRRLKVA, and the Custom DK Fit Kit, part # DK297.
So, you... view full answer...
The 24x60 Curt Cargo Carrier for 2" Hitches part # e98874 is designed for 2" hitch receivers with a weight capacity of 500 lbs. If you have a 2" hitch receiver, then yes this carrier will work for you. If you look at my attached video, you can see how the cargo carrier can be folded up. The cargo carrier when folded up should have about 4" of clearance from the rear hatch of your Traverse to the closest part of the carrier. view full answer...
We have standard dust cover/caps that fit the 1.98 inch hub bore you mentioned with the part # RG04-020 but we don't have any that is chrome. Chrome plating probably wouldn't work well as it may eventually flake off. view full answer...
There was an older Curt hitch for the 2018 Chevy Traverse that did hang below the rear bumper but the current hitch part # CU29FR does fit behind the cover and would not hang below like what you see in the attached video and picture. view full answer...
We do have a trailer wiring harness for your 2014 Chevrolet Traverse, however, the wiring harness from your 2011 Chevrolet Traverse will not fit. Chevrolet made a design change in the tail light connectors for the 2013 and 2014 model years, so they require a different harness.
The Curt T-One Wiring Harness, # C56181, that you referenced is the correct harness for your 2014 Traverse. I have attached a link to the installation instructions for you to check out. view full answer...
We do have CIPA towing mirrors that fit your 2017 Chevy Traverse, and they won't be a Mickey Mouse fit, though the mirrors that fit are all universal fits, as there are no custom options for a Traverse. That means the straps are going to show as opposed to a mirror that slips on, but they are still going to give you the functionality to extend your view, and are going to be a very stable fit.
The reason for that is the CIPA universal towing mirrors are secured two ways - they both clip... view full answer...
The Stealth Bar # JA7981 will be the lowest profile bar set up offered for your 2020 Chevrolet Traverse by far. I like the Yakima HighSpeed # Y02115 because it works with both the 15 and 20 Thru-Axle bikes and is also easy to install. I've included a video for you to check out! view full answer...
The owner's manual for the 2019 Chevy Traverse does say on page 344 that tire chains should not be installed on any tire size other than size P255/65R18. This restriction is due to limited clearance when the vehicle is fitted with larger tires. It also states to use traction devices only on the front tires.
Some regions have tire chains laws that legally require you use them (or at least to have them in the vehicle) under certain weather conditions and/or in certain specific areas. Since... view full answer...
If you don't already have a wiring connector on your 2012 Chevy Traverse then that means you don't have the tow package and you need to install a 4-Way wiring harness and an adapter for a 7-Way. I am not sure what factory plug you found but when I spoke with my contact at Tekonsha he said that there was a change from the 2012 to 2013 Traverse models which is why the wiring kit # 118271 won't fit the 2012 model.If you send me a pic of the connector that you found I can try to help you identify... view full answer...
I took a look at an online version of the owner's manual for a 2017 Chevy Traverse and it says that for an AWD without the V92 Trailer Towing Package the maximum trailer weight is 2,000 lbs and the GCWR is 7,700 lbs (GCWR is the total weight of the trailer, trailer cargo, Traverse and Traverse cargo including passengers - essentially the weight of everything).
If you do have the V92 Trailer Towing Package the maximum trailer weight is 5,200 lbs and the GCWR is 10,450 lbs. So it would... view full answer...
Hopkins Custom Tail Light Wiring Kit for Towed Vehicles item # HM56106 fits the Chevy Traverse for model years 2009 through 2012. It does not fit your 2015 model year but the flat towing wiring kit options for your 2015 Traverse are shown on the linked page.
These include bulb-and socket kits like # RM-152-LED, hardwired diode kits like # RM-15267 and magnetic light kits such as # TL21RK. The included article on tow bar wiring will give you the details on each type to help you decide... view full answer...
Transmission and oil coolers are not vehicle-specific so you can install any cooler that you can find the space for within the engine compartment. Larger coolers work better than smaller ones so if you have a spot in front of your A/C condenser that can handle the 11 wide x 8-3/4 tall x 7/8 deep Derale # D13503 then its an excellent choice for your 2011 Traverse.
You will need one of the hose fittings # D13035.
I have linked the written instructions as well as an install video to walk... view full answer...
Yep, the two are 100 percent compatible. The Rhino-Rack Ski and Snowboard Carrier # RR576 will absolutely fit the Malone AirFlow2 Roof Rack # MPG216. view full answer...
There have been some issues with installing aftermarket brake controllers on the 2019 Chevrolet Traverse models that already have the factory towing package. This does not mean it is impossible, however.
Those four blunt cut wires inside the front driver side instrument panel are definitely the correct wires. Page 284 of your owner's manual will tell you which wire handles which function. You will need to check the "Battery Feed" wire to make sure it has power with something like the circuit... view full answer...
We have exactly what you need in order to lower the Kuat Sherpa 2.0 bike rack so you can more easily lower your bikes. There is an adapter made by Kuat which will lower the rack by 2-1/8 inches that is going to be the best option for you:
- Kuat Hi-Lo Hitch Extender # HL20B
You will just install the extender in the hitch of your Traverse and attach your Sherpa 2.0 bike rack directly to the extender, and it will lower your rack by 2-1/8 inches, making it simpler to load them up. I have... view full answer...
If your 2009 Chevy Traverse has that center console between the second row seats then you would just trim the mat, # WT441114, to fit around it. The mat is marked for trimming for this exact reason. That way they can make one design and have one part number that fits models with or without the center console! view full answer...
The T-One wiring harnesses for the version of your 2014 Chevrolet Traverse that HAS the factory tow package are parts # 118271 for the 7-way type and # 118270 for the flat 4-pole type. Both use the rectangular OEM connector included in tow packages that is shown in the linked photo.
If this is what you have on your Traverse you can test the pins on it to see if the wiring is active. Some vehicles may not have the required fuses and relays installed (by the way, those are included with... view full answer...
This fit will not give you any problems, it is confirmed to fit your vehicle. The Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails, part # MPG217, clamps around your factory raised rails. It will not matter if the raised rails vary in size from front to back. The clamps are designed to fit a variety of raised rails so this will not be a problem. Just keep in mind that with many accessories will need to have a minimum bar spread. I would install my front bar as forward... view full answer...
Go To Results