Dust Cover for Trailer Hub with 1.98 inch Diameter
Question:
I was wondering where on this planet I can buy 1.98 chrome dust caps? I have a pop up that Ive restored and cant find these for the life of me! Such a common size. I know you probably are not fond of referring somebody to another company but I am all out of thoughts. Btw, I have bought hitches and ball mounts from you just so you know??
asked by: DAN C
0
Expert Reply:
We have standard dust cover/caps that fit the 1.98 inch hub bore you mentioned with the part # RG04-020 but we don't have any that is chrome. Chrome plating probably wouldn't work well as it may eventually flake off.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Grease Cap, 1.988" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Continue Researching
- Article: Measuring a Trailer Tire
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Trailer Hitch & Wiring Harness for 2008 Infiniti FX35
- Q&A: Do Trailer Hubs have a Speed Rating for Use on a Boat Trailer and Highway
- Q&A: Trailer Taillight Lens Recommendation to Replace AISTP2 85
- Q&A: Clips and Clamps to Attach Wires and Wiring Harnesses to the Bottom of a Trailer Frame
- Q&A: What Might Cause a Grease Cap to Keep Coming Off of the Hub Assembly On a Boat Trailer
- Q&A: Availability of Coupler Lock With a 5/16 inch Pin Diameter
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: 7 Common Questions Everyone Has About Trailer Tires