While we have an option for you, both of the hoses from the EZ Coupler RV Sewer Hose Kit - (2) 10' Long Hoses # D04-0115 will be 50 inches when collapsed, which is too long for your 4 foot bumper. You can use one of the 10 foot hoses, the EZ Coupler RV Sewer Hose Kit w/ Swivel Fitting and 4-in-1 Clear Adapter # D04-0114, which will collapse to 25 inches, but that is actually going to be the longest hose available that fits in a 4 foot bumper space, but its fitting will require about a 5-1/2... view full answer...
I went out to our warehouse for you and measured the Prest-O-Fit Adapter for RV Sewer Hose part # PR66FR, the inner diameter of hose side is right at 2-3/4".
I can't confirm fit with the FloJet Macerator Pump unfortunately as this is no something we offer. view full answer...
The Viper RV Sewer Hose Extension w/ 3" Swivel Fittings # D04-0410 is 3" in diameter with the swivel fitting measuring 4-1/8" in diameter, so it would not fit your 4" square bumper.
It will however fit inside the 4-1/2" opening of the Valterra RV Sewer Hose Carrier - Black # A04-3460BK or # A04-3460 for white. view full answer...
The Viper RV Sewer Hose - Gray - TPE - 2' # D04-0402 measures 13 inches when compressed and has a lug to lug measurement of 4-1/4 inches which will fit in most standard bumpers but I recommend measuring since the spacing puts the lugs in the corners where there is more room. If you are replacing your sewer hose, you will want a longer hose than 2 feet, so I recommend the Viper RV Sewer Hose Kit w/ Swivel Fittings and 4-in-1 Clear Adapter - (2) 10' Long Hoses # D04-0475 which will have... view full answer...
The Quick Drain RV Sewer Hose # D04-0120PB referenced in your question measures 10 feet long when it is fully extended. I went out to the warehouse and measured a length of 11-3/8 inches when the hose is in its retracted/compressed position. This is a really nice sewer hose that features a bayonet fitting at one end that will secure to the RV's waste valve.
This hose also comes in a 20 foot long model, with part # D04-0121. The retracted/compressed length of this hose is 23 inches.
I... view full answer...
The Camco RhinoFLEX RV Sewer Hose Y Fitting, item # CAM39812, is for standard 3-inch holding tank hoses. This part allows you to empty two holdings tanks at one time into a single hose. Each tank will connect to the Y with its own hose and then the single hose like # D04-0475 connects to the dump station. view full answer...
We can help you with a replacement 3-inch sewer hose and we also have adjustable hose carriers in various lengths just in case you prefer a longer hose than will fit in your current 26-inch storage carrier. Please refer to the linked page to see both hoses and carriers.
As an example, we offer the Viper extra-heavy-duty RV Sewer Hose Kit # D04-0475 which consists of two 10-foot connectable hoses along with a 90-degree clear elbow. Each hose collapses down to a 50-inch length. If you only... view full answer...
The RhinoEXTREME RV Sewer Hose w Swivel Fittings, 4-in-1 Adapter, and Caps - Black - 15' Long # CAM39861 is compressed to a length of approximately 6-1/2 feet. I went out to the warehouse to measure it for you. If you are wondering if it will fit inside the 4 inch square bumper of an RV, it absolutely will. view full answer...
Yes, the hose outside diameter is 3 inches. The RhinoFLEX RV Sewer Hose w Swivel Fittings, 4-in-1 Adapter, and Storage Caps - 15' Long # CAM39761 with its attachments fits 3 inch slip and also 3 inch , 3-1/2 inch, and 4 inch threaded pipes. view full answer...
The RhinoFLEX RV Sewer Hose in the Kit # CAM39768 does have a length of 3 feet when it is extended. When it is retracted (or bunched up), it measures 15-1/2 inches.
This is a 3 inch hose that has bayonet fittings for you to connect the black water tank on your RV to your portable wastewater tank. view full answer...
The Dominator RV Sewer Hose # D04-0202 has an overall length of about 11" when measuring from the end of the bayonet fitting to the other end with the lugs. view full answer...
The lengths of the RV sewer hoses are listed by the expanded dimension. For example, the RhinoFLEX sewer hose part # CAM39761 that you referenced is 15 feet when stretched out but when compressed for storage measures 52-3/4 inches overall. In feet that's a little over 4-1/4 feet. view full answer...
The Camco RhinoFLEX RV Sewer Hose "Y" Fitting # CAM39812 referenced in your question features an outside fitting diameter of just under 4 inches. This fitting will store nicely in a standard 4 inch RV bumper.
I have attached a short video demonstration on this product that you can also check out. view full answer...
I measured the fittings on the EZ Coupler RV Sewer Hose Kit # D04-0115 for you. On either end the overall diameter at the widest point is 4.15 to 4.16 inches. That is a hair under 4-3/16 inches. view full answer...
The overall diameter at the widest point of a Rhino Flex hose is going to be 4.16 inches which is a hair under 4-3/16 inches. At 4-3/8 inches inner diameter the Valterra EZ RV Sewer Hose Carrier # A04-0150 is large enough to accept the Rhino Flex hose. view full answer...
The half-pipe connector 365052 is designed to fit half-pipes that are 2 inches tall and 4 inches wide. It is a replacement for the ones included with Lippert Flow Down RV Sewer Hose Support Systems such as # LC365053. view full answer...
The RhinoEXTREME RV Sewer Hose Extension part # CAM39863 has a collapsed length of about 5' 6" it compresses almost 50% of its extended size. view full answer...
The fittings of the RhinoFLEX RV Sewer Hose with Swivel Fittings, 4-in-1 Adapter, and Storage Caps # CAM39761 will not fit in your bumper that is 3-3/4 inches (the bayonet fitting on this is the standard 4-3/16 inches), but the fittings are actually not designed to fit in storage areas, they are meant to be stored separately.
The RhinoFLEX comes with storage caps, which is what are meant to be used with the hose when it is stored in your bumper. The hose itself is 3 inches in diameter... view full answer...