When the MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-04500K is closed it would add 3-3/4 inches to the roof of your RV and when open it would add 12-1/2 inches. view full answer...
From the center of the Replacement Dome for Dometic FanTastic RV Roof Vents # FVK1020-19 to the portion of the lid that sits on the lip of the vent is approximately 2-1/4". From the center to the end of the lid is approximately 3-1/4". This replacement lid is designed for use with the following vent models: FV801200, FV801208, FV801250, FV807350, FV802250, FV803350, and FV800900. I recommend checking your vent to see which model you have to confirm fitment. view full answer...
The Fan-Tastic Vent Roof Vent w/ 12V Fan part # FV802250 is capable of moving up to 920 cubic feet of air per minute (CFM) at its highest setting. It also has two other settings with reduced cubic feet per minute ratings.
The vent will fit most RV's and campers with roofs up to 4" thick. The vent has an included 2 year warranty and the dome lid has a limited lifetime warranty. view full answer...
The MaxxFan Deluxe Roof Vent w/ 12V Fan # MA00-06401K has a weight of 20 lbs. It has a smoke-colored dome and gives you 4 different speed options. It also has an integrated rain shield as well as a bug shield to keep your RV safe from weather and insect annoyances.
I've added a link to a video review of this vent for you to take a look at. view full answer...
The Replacement Dome for Fan-Tastic Vent RV Roof Vents # FVK1020-19 that you referenced measures 14-13/16 inches from the hinged side to the opposite side (tall) and then 14-13/16 inches from side to side (wide). I have attached a picture for demonstration.
You will want to take note of the hinge itself. Most vent covers have a hinge that is rotated into place whereas this vent cover is installed with hardware. If your vent installs with hardware then this should be the correct replacement... view full answer...
I confirmed with the manufacturer that the Replacement Dome for Fan-Tastic RV Roof Vents # FVK1020-19 measures 15" long, 15" wide, and 3-1/4" tall. I have attached a demonstration video and diagram for this product. view full answer...
The Fan-Tastic Vent 12V Reversible Fan RV Roof Vent # FV801250 operates in both directions with a 920-CFM (cubic-feet-per-minute) air volume. I went to our warehouse to measure the height of the fan assembly without the lid's height included. I found this to be 2-1/2-inches, measured from the top of the flexible rubber gasket to the bottom surface of the mounting flange, which is what will contact the surface where you install it. view full answer...
Since you know you do not have a MaxxAir fan you will have to drill to install the MaxxAir II RV and Trailer Roof Vent Cover item # MA86JR. The EZClip pins only attach to their vents. As far as compatibility goes so long as your roof vent is 14" x 14" this cover will work.
As far as identifying what fan you have I don't have anyway of knowing that information. You can look for a part number and try to identify it that way, check your owner's manual, or contact Keystone directly. We do... view full answer...
The height of the interior mounted garnish on the Ran-Tastic Vent, # FV800800, measures 4-1/2 inches tall.
This Fan-Tastic Vent will fit a 14-1/4 x14-1/4 inch opening and 4 inch thick roofs on your RV, camper, or trailer. view full answer...
The MaxxFan Deluxe Roof Vent w/ 12V Fan # MA00-07500K referenced in your question fits a 14 inch x 14 inch RV roof opening, but the mounting flange itself measures 16-1/2 inches x 16-1/2 inches. This will refer to the footprint of the unit from inside your RV/trailer.
The actual vent that will mount above the roof of the trailer measures 22-1/2 inches long and 16-1/2 inches wide. When closed it will extend 5 inches above the roof and when open it will extend 9-5/16 inches above the roof.... view full answer...
The garnish of the Fan-Tastic roof vent you have part # FV802250 is 4-1/2 inches tall but we do offer taller garnishes like the part # FVK1060-81 which is 6 inches tall and can be cut down shorter as needed. view full answer...
The MaxxFan Deluxe Roof Vent w/12V Fan measures only 5" tall when closed.
Attached is a diagram of this measurement as well as an installation video for you to check out as well. view full answer...
The overall diameter of the JR Products RV Mushroom Vent, # 37202-29125, from edge to edge is 5-3/4". The vent opening diameter is 4" and the overall height is 1-7/8" with the distance on the mounting holes, center to center, straight across at 5-3/16".
This is a replacement vent for the sewer and holding tanks mounting on the roof of your RV allowing odors and gases to escape instead of coming in to the living quarters of the RV; there is no built in fan or wiring to deal with. view full answer...
When the lid of the Fan-Tastic roof vent part # FV802250 is closed it will add 4-1/2 inches to the height of your trailer. When open it would be 11-1/2 inches. view full answer...
Not a saint, but I should still be able to help you out! I believe you are asking about a standard square roof vent on your trailer, and you really just need to know two things - the size of the cut out of the vent opening and the (approximate) depth of the opening. Good news is, square trailer vents are almost always a standard 14-1/4" x 14-1/4" (give or take a smidge), so that's likely what you have, but you'll want to verify. If if is, you can use either a vent without a fan or a vent... view full answer...
You're correct that the 31-1/4" measurement includes the cap over the hinge at the top of the # 324-000111, so it's going to be a tight squeeze; you could do without the cover, but I'm not sure how much it would help since there will be a hinge bolt sitting below it that still might get in the way. If you can't make that one fit, the next size down would be the Everchill # 324-000110 which is 19-1/2" tall.
You will want some sort of fan or vent for a refrigerator if you don't already... view full answer...
I can see why the diagram might be confusing for the Ceiling Garnish - Fan-Tastic Vents Roof Vent - 6" Leg # FVK1060-80. This garnish is listed as being a fit for 14-1/4" x 14-1/4" RV roof vent openings, but the actual dimensions will be slightly different; in this case, the dimensions shown are for the interior dimensions of the garnish and the outer edges of the mounting flanges. The important measurement you'll want to confirm is the size of your roof opening, which should be between... view full answer...
Happy to help! The correct vent cover for your 299645 vent is the MaxxAir Standard RV and Trailer Roof Vent Cover item # MA00-933069. Instead of mounting to your roof, this vent cover mounts to the frame of your roof vent with 4 drilled holes.
I have attached an installation video below that will help you get this cover set up. view full answer...
The only switches we have for Ventline Range Hoods are the Replacement Lamp Switch item # BL0108-01 and the Replacement Fan Switch item # BL0108-02. These fit the Ventline S0721 Series range hoods. The rotary knob is no longer available.
If you can't locate the correct switch I recommend replacing your range hood with the Furrion Ducted RV Range Hood with Light item # FHO23SACRBL or Furrion Ductless RV Range Hood with Light item # FHO23SACRVBL. view full answer...
A vent/fan like the Fan-Tastic Vent Roof Vent w/ 12V Fan and Remote # FV807350 thermostat won't draw amperage and will only draw a few volts when the fan isn't running; overall the power draw is very minimal when not running but you'll draw up to 4 amps when the fan is operating at full speed. view full answer...