The Gustafson RV Interior Light part # 277-000330-331 is 12 volt DC since it's intended for an RV application. If you need AC power your best option would be to look at standard interior lighting. view full answer...
There are absolutely rectangle RV dome lights and you can choose between incandescent or long-lasting LED; here are the options for rectangle RV dome lights:
- Optronics RV Interior Double Dome Light with Switch - Incandescent - Rectangle - Clear Lens # RVIL22
- Omega RV Double Dome Light with Switch - Surface Mount - Incandescent - Rectangle - Clear Lens # 328-001-902XPW
- Opti-Brite LED RV Dome Light - 227 Lumens - Rectangle - White Lens # ILL36CB
- Opti-Brite LED RV Dome Light -... view full answer...
The Diamond LED Interior RV Dome Light # DG52508VP referenced in your question has an overall diameter (including the white housing) of 3 inches. I have attached an image to assist.
The distance between the mounting holes, on center, is right at 2 inches. view full answer...
LED lights will almost always be brighter than fluorescent lights when comparing similar sized lighting fixtures and they should draw much less amperage. I could not find any information on the 18 inch fluorescent light that you referenced but I would be strongly inclined to believe that the LED RV Interior Light # ILL31CB will be much brighter than an 18 inch fluorescent bulb.
Check out the video I put together for you where I demoed a # ILL31CB in a dimly lit environment to show you... view full answer...
The LED RV Interior Can Light # DG52445VP has a 3-1/8" diameter so you're looking for a cutout of about 3" since this is a recessed mount. You're essentially needing just enough of a cutout so that the whole isn't visible. This uses springs to keep it into place and those arms sit well outside of the 3-1/8" measurement so you don't have to worry about the mounting side of things. view full answer...
The Replacement Lens for Bargman 76 Series Interior and Bunk Lights # 30-76-028 is a little difficult to measure due to the unique shape. The rough dimensions are 4-3/8 inches long, 1 inch tall, and 3-13/16 inches wide. view full answer...
I wasn't able to cross reference any part with the number 34-76-223 with anything that we have on our site, but I have attached a diagram that we did that shows the mounting hole spacing on the Bargman RV Interior Double Light # 30-76-223 that you can use as a reference. You can use this to compare to your existing light and see if it matches up.
If you find that the holes are spaced differently, just let me know what you find and I can look to see if we have anything close. view full answer...
The Gustafson RV Ceiling Light # 277-000330-331 that you referenced is a satin nickel finish like you said you are interested in. The LEDs in the fixture are not replaceable but that won't be an issue since LEDs typically last much longer than ever needed and the color is a warm white that would work well in an interior.
Where you are seeing that is not satin nickel is a different question/answer page for a different size light. view full answer...
The Gustafson RV Pendant Light w/ Bulb part # 277-000418 you referenced uses a 1076 light bulb so if you wanted to convert to an LED I recommend part # DG526221VP as it puts out a warm white light which is great for interior lighting.
The overall height of this is 17-1/2 inches. view full answer...
We do have exactly what you need, with floor registers that have interior dimensions (the opening) of 8 inches long and 4 inches wide; you even have your choice of color:
- Black: Dampered RV Floor Register # 37202-29155
- White: Dampered RV Floor Register # 37202-28965
- Brown: Dampered RV Floor Register # 37202-28975 view full answer...
I went and pulled a LED Rectangular Interior/Exterior Light # ILL22CB from our warehouse and found the dimensions to be 4-1/2 inches by 2-1/2 inches.
Check out picture I attached that shows these dimensions. view full answer...
For the headache and cost it's probably best for you to go with a new microwave. I looked up the dimensions of your Magic Chef Model MCO153S and the closest matching option we have is the Greystone Over the Range RV Microwave # 324-000135 since yours is overall 29.9 inches wide. view full answer...
The Opti-Brite LED Interior Light Item # ILL08COB has overall dimensions of 18 inches long by 5-3/4 inches wide. The back that will be recessed into the mounting surface is approximately 16-1/2 inches long by 4 inches wide. I have linked a video review of this light for you. view full answer...
The interior dimensions of the Replacement Stainless Steel Trim Kit for Greystone Built-in Microwave part # 324-000153 which is an exact replacement for the Greystone Standard RV Microwave part # 324-000106 is roughly 20" wide x 10.5" tall. view full answer...
The Better Bath RV Kitchen Sink, # LC385313 has exterior dimensions of 27" long x 16" wide x 6-7/8" deep with interior of 25" long x 13-7/8" wide x 6-3/4" deep. The drain hole diameter is 3-1/2", you can use the LaSalle Bristol RV Kitchen Sink Drain w/ Strainer Basket, # 34433JN1007.
This can mount as a drop in or as an undermount, so you are able to choose which setup works best for you and your RV. view full answer...
From the carpeted "floor" to the top of the railing on the 90" x 26" MORryde RV Cargo Sliding Tray # MR87FR measures 3-1/2" (see attached).
If you jump to the 3 minute mark of the linked review video you can see where we take this measurement for you! view full answer...
The weight of the Optronics Opti-Brite 12V LED Interior Light Fixture # ILL08COB is just over one pound. The shipping weight including all of the protective packaging is about 2-lbs.
For reference I linked a review video and a photo of the light with its overall and mounting dimensions to help you with your installation. view full answer...
The Peterson Interior Light part # 433600 that you referenced draws 28 watts or 2.33 amps so if you were to install an inline fuse you'd want it to be right at 3 amps. view full answer...