Expert Answers about Buick
- Trailer Hitch Classes Available for a 2003 Buick LeSabre
- All of the trailer hitches available for your 2003 Buick LeSabre are Class II hitches with 1-1/4 inch receivers. Curt hitch # C12044 has the highest tongue weight capacity of the options at 350 pounds. But Curt also says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load (such as a bike rack or cargo carrier) per their warranty requirements. All of the hitches are rated for 3,500 pounds gross trailer weight.
If you have a 2 inch accessory you want...
view full answer... - Fuse Bypass Kit to Bypass 50-Amp and 15-Amp Mini Fuses in 2011 Buick Enclave
- For your 50-amp fuse you can use Blue Ox ByPass Switch # BX88274 and for your 15-amp mini fuse Blue Ox # BX88272.
The Roadmaster FuseMaster Fuse Bypass Switch # RM76514 that you referenced does provide 2-fuse bypass capability but its amperage rating for both is 20-amps.
view full answer... - Availability of Class III Hitch for 1996 Buick Roadmaster Estate Station Wagon
- We do offer a Class II hitch for the 1996 Buick Roadmaster Estate Wagon with a respectable 3500 lb towing/350 lb tongue weight capacity, part # C12009.
For towing, you'd also need the trailer wiring harness, part # C55352 and a 1-7/8 inch ball, # 19256 or a 2 inch ball, part # 19258.
None of the hitch manufacturers we deal with offer a Class III hitch that would be compatible with the 1996 Roadmaster Estate Wagon.
view full answer... - 2" Trailer Hitch Receiver and Wiring Harness For a 1977 Buick Estate Wagon
- You will need a receiver like the Draw-Tite Ultra Universal Trailer Hitch Receiver # 41990-07 for your 1977 Buick Estate Wagon. We currently do not carry a custom fit receiver for your Buick. This universal receiver will allow you to fit a 2" receiver on a frame up to 44" wide. The 7" tall mounting brackets allow you to bolt the receiver on or weld it on. You will need to check your owners manual for any manufacturer limits for towing as I could not find any specifications for towing limits...
view full answer... - 2010 Buick Enclave Fuse Bypass Switch for Flat Towing
- We do! You're going to want the Roadmaster FuseMaster Fuse Bypass Switch # RM-76517 for your 2010 Buick Enclave. This is rated for a 50-Amp FMX Fuse and makes it so you just have to switch a button instead of physically pulling the fuse when you get ready to flat tow.
Attached is a review video for you to check out.
view full answer... - Availability of Trailer Hitch that Fits 2024 Buick Envista
- We have a 2 inch hitch that fits your 2024 Buick Envista with the Curt # C75VV which is generally the more popular hitch size but we do not have a 1-1/4 inch option. For larger vehicles typically the smaller hitch size does not get made since it is much lighter duty. We do have an adapter to convert this hitch size down to a 1-1/4 with the part # HT02.
view full answer... - Is There a Curt Trailer Hitch for 2023 Buick Enclave
- Curt does make a hitch for your 2023 Buick Enclave. What you need is the Curt Trailer Hitch # CU29FR. This is a Class III hitch with a 2" receiver.
It features a bolt-on installation and will be completely hidden with the hitch bumper panel in place. It also comes with a lifetime warranty.
view full answer... - Flat Towing Base Plates and Tow Bar Set-Ups for 2016 Buick Enclave
- Flat towing a vehicle behind an RV requires 5 basic components: 1) tow bar, 2) safety cables, 3) wiring kit and 4) base plates and 5) a braking system for the towed vehicle. The linked articles will give you good general background on each of these.
I checked with my technical contact at Roadmaster and they do offer base plate kit # 523149-1 which fits Buick Enclave models (without brushguards) up through the 2016 model year. I suggest their Falcon 2 Tow Bar, part # RM-520, since it will...
view full answer... - Availability of SwiveLift Loading System with Shorter Stinger to Use with a 2014 Buick Enclave
- While Vikings Solutions doesn't make the SwiveLift Loading System # 310-VSL001 with a shorter stinger, you may be able to utilize the Rack Jack II Hoist # 310-VRJ001 instead for your 2014 Buick Enclave since you can push your cargo in towards your rear hatch area while letting some of the cable out. Aside from that there isn't anything else that would accomplish what you're trying to do short of using loading ramps and finding a way to mount a winch inside your SUV.
view full answer... - Trailer Wiring Harness for 2005 Buick Allure
- I spoke with my contact at Curt, who tells me that the reason that the # C56340 isn't shown as being a fit for the 2005 Buick Allure is that the wiring harness was never tested on the vehicle. Because of this, Curt won't call it a fit.
If the only difference between the two vehicles is the nameplate, then the harness should fit. However, because Curt can't confirm the fit, we can't guarantee you the harness will work.
If you feel like taking a gamble, go with the # C56340 but if you want...
view full answer... - Towing Mirrors for 2015 Buick Enclave
- We can help you with a set of towing mirrors for your 2015 Buick Enclave.
No custom-fit towing mirrors are offered for the car but we have several options in universal-fit towing mirrors that will work great. K-Source mirror kit # KS3990 is a set of two dual-lens mirrors that clip on to the Buick's OEM mirrors. For a similar pair of single-lens towing mirrors they offer part # KS3891-2.
Both work great on mirrors that have a gap between the actual glass surface and the outer housing....
view full answer... - Black Floor Mats for Front Row of 2008 Buick Enclave with 2nd Row Bucket Seats
- We offer the WeatherTech Floor Mats in Black, # WT442511, for the front seats of your 2008 Buick Enclave.
view full answer... - Parts Needed To Transport Wheel Chair with 2008 Buick Lucerne
- I do have a hitch option for your 2008 Buick Lucerne to transport a 500lb electric wheelchair, but it will require a trailer as your vehicle is not rated for the amount tongue weight that a carrier would have.
What you'll need is the following parts:
Hitch # C12044
Ball Mount # C45520
Hitch Ball # C40001
Hitch Pin and Clip # F-4
Wiring Harness # 56047
and a small trailer like the Detail K2 # K2MMT4X6
To be able to use an actual carrier like # FHG69ZR you'd need to have a full size SUV...
view full answer... - Availability of Bulb Type 921 for 2008 Buick Lucerne
- We do offer replacement bulbs in the 921 type including both incandescent bubs like # 30-90-021 as well as LED types that are brighter, more efficient, cooler in operation and longer-lasting. Colored bulbs are offered, such as the Putco wedge lights # P230921B360 in blue and # P230921R360 in red.
view full answer... - Is There a Class III 2 inch Trailer Hitch for a 2001 Buick LeSabre
- I have a solution for you, but we do not carry any Class III 2 inch trailer hitches for your 2001 Buick LeSabre.
We do have the Draw-Tite Class II receiver, part # 36309, that fits your Buick. It does have a 1-1/4 inch receiver, but you can change it to a 2 inch receiver by using an adapter like part # HTAD. Even though an adapter will allow you to carry accessories that have a 2 inch shank, keep in mind that anytime you use an adapter that it reduces your Tongue Weight capacity by 50 percent.
view full answer... - Is 130 - 160 Degrees too Cool for Transmission Fluid Temperatures
- The cooler you can keep transmission fluid the better basically. 130-160 degrees is actually really awesome as this means your transmission is going to last a very long time. Honestly 180 isn't bad either but 130-160 is better if anything.
I am slightly confused by the second portion of your question though as you said the gauge is not working but previously had stated that the gauge was reading temperatures.
view full answer... - Plug and Play Trailer Wiring Harness for 2001 Buick LeSabre
- There isn't a plug and play option available for the 2001 Buick LeSabre, most likely due to the age of the vehicle and the fact that it's not frequently used to tow. However, there is an available hardwire option that'll work great for you.
You can use part # C59496, which would wire directly into the wiring harnesses that feed your taillights. The best place to tap into your taillight wiring is directly behind the taillight assemblies. Use the included tester to probe the wires feeding...
view full answer... - Availability of Plug-and-Play Trailer Wiring Harness for 2001 Buick LeSabre
- There isn't a plug and play option available for the 2001 Buick LeSabre, most likely due to the age of the vehicle and the fact that it's not frequently used to tow. However, there is an available hardwire option.
You can use part # C59496, which would wire directly into the wiring harness that feeds your taillights. The best place to tap into your taillight wiring is directly behind the taillight assemblies. Use the included tester to probe the wires feeding the taillights. Have a helper...
view full answer... - 5 on 4-1/2" Idler Trailer Hub For Utility Trailer With 1-1/4" to 3/4" Tapered Spindle
- The Dexter Trailer Idler Hub Assembly # DX22XR uses the same Inner # LM67048 and Outer # LM11949 bearing size as the Hub # AH15450ECOMP you found. It has the 5 on 4-1/2" and will fit your tapered spindle.
view full answer... - Parts Needed to Tow Small Trailer with 1999 Buick Century
- First you'll need a trailer hitch installed on your 1999 Buick Century which for that the best option is the Draw Tite part # 36374 which has the best towing capacities, for trailer wiring the # 18252 is what you need and then for a ball mount # 36061 with hitch balls # 19258 for a 2 inch ball or part # 19257 for a 1-7/8 inch ball.
view full answer...
Go To Results