Hi Jim,
For a 2005 Ford F-150 you would need the TorkLift Camper Tie-Downs - Front # TLF2004 and Rear # TLF3003. To complete the setup and secure the camper to the tie-downs you can use the TorkLift Locking FastGun Turnbuckles # TLS9522-2-LK view full answer...
I would be happy to help! To mount a Travel Lite Camper in the bed of your 2023 Ford F-150 with a 6-1/2' bed you will need the following parts:
TorkLift Camper Tie-Downs - Custom Frame Mount - Front item # TLF2018
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear item # TLF3007
TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs item # TLS9020 if you do not already have chains view full answer...
Hey Alan, Torklift does not offer just the receiver portion of their Torklift tie downs so you would have to go with an all new set for your 1999 Dodge Ram with the part # TLD2100 and # TLR3500. view full answer...
We dont offer just the frame mounted portion of any of the camper tie downs we offer. You'd want to find out the brand of the tie downs that you have and contact them to see if they can get you just the parts you need if that's the route you need to go. Otherwise I attached a link to all of the tie downs we offer for your 2021 Ram 3500 for you to check out. You'll need to select the configuration of your truck from the drop down menu to see what you'd need. view full answer...
Thanks for the question Phil, and we do have the exact camper tie-downs you need for your 2020 Ford F-250 with the 8 foot long bed, running boards that end at the cab, and factory hitch. These are from TorkLift and are the following parts:
- Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2021
- Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF3008
These are frame-mounted, so they are going to distribute the weight of your camper across your truck's base instead of... view full answer...
Hey Mark, you would need a new set of rear Torklift Tie Downs since you installed a Superhitch on your 2008 Ford F-350 which for that you would want the part # TLR3504. view full answer...
The correct rear TorkLift Tie-Downs for the TorkLift SuperHitch Original Trailer Hitch Receiver # TLD1109 installed on your Ram 2500 is the Kit # TLR3507, which install directly to the side plates as you can see in the attached photo.
With a standard hitch installed the tie-downs should be mounted to your vehicle frame but this TorkLift hitch has mounting points on it for the tie-downs to be installed on which is why you need to swap out the rear kit you have installed. view full answer...
You are going to want the TorkLift Camper Tie-Downs Front # TLD2124 and Rear # TLD3109 for your 2014 Ram 3500. These are the steel versions that you had previously.
We do have the TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK if you do not still have your turnbuckles. view full answer...
Yes, the # TLD2142 is exactly what you need for your 2019 Ram 3500 with running boards extending under the truck bed. For the rear, you need the # TLD3112 if you have the factory hitch or # TLR3510 if you have the TorkLift SuperHitch Magnum 30K. view full answer...
We do indeed have the right grease seals for your Tie Down/Dexter 4271.44 Dmp. 46385A, with the correct pair being the following:
- Grease Seal # RG06-050 view full answer...
Yes, there's even an e-track wheel chock setup with the Erickson E-Track Tie Down Kit part # EM58523-09162-4 that you can use to secure a vehicle to E-track. You'd need two sets of these for each car. view full answer...
We have exactly what you're needing, Clayton!
The Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-480B that fits your 2018 Ford F-150 can be broken down into the following parts:
- 54" Vortex Crossbars # RRVA137B-2
- Quick Mount Legs # RRRLT600
- RTC-Style Roof Rack Tracks # RTC16
Since you already have the crossbars you will just need the Quick Mount Legs and RTC-Style Roof Rack Tracks to get this roof rack on your camper shell. view full answer...
Hello Robert. The Manual Lift Knob for the # FV807357 vent has a screw that goes down thru the top of the handle and attaches it to the motor assembly. If you were to remove the knob, there would be no part of the shaft that extends beyond the motor, so it sounds like this vent will work for you. view full answer...
Great question Marc, so picking out an electric trailer jack is not like car parts where it's based on the year make and model. Instead it really comes down to what you value from the jack. There are more expensive options that are really fast and have higher capacities like the Phoenix part # UF38-944055 which raise and lower in a matter of seconds and come with a remote.
Or we have a more stripped down version that is still fast with the part # UF38-944040.
If you wanted something... view full answer...
The Clearsource Ultra RV Water Filter System # CS87FR really is designed for "weekend warriors" such as yourself, who would only be using it occasionally, and are not living in the camper full time. It is very easy to set up and take down, and it is pretty lightweight, at least as far as water filtration systems go.
We do not recommend leaving it full when in storage though. What you will want to do is remove the filters and blow out the system with pressurized air (do not exceed 30 PSI).... view full answer...
Hi Jim, so in our experience with the Thule Insta-Gater Pro Truck Bed Bike Rack # TH93VR the bike will be stable with very little movement. You may a small bit of movement of the front tire when going over bumps but nothing severe at all. You could add some stabilizer straps like part # SA3033 to help keep the tires in line with the frame at all times. They might be nice to have especially if you plan to be taking long trips with your bike. The straps are definitely not required though.... view full answer...
Yes, you can definitely add carriers to the Yakima EasyRider Double Decker Trailer # Y08129 to safely increase the amount of boats you are carrying, as long as you don't exceed the weight ratings of the trailer.
I recommend using a dual J-Style carrier like the Thule Compass Kayak Roof Rack w/ Tie-Downs # TH890000 so you minimize the amount of space needed for each carrier, plus if you end up taking fewer kayaks this doubles as a saddle carrier for easier loading of a single kayak. view full answer...
Hey Christoph, so worse case scenario you would have drop the tank but hopefully there's a way to maybe just loosen some of the bolts on it and maybe the lines so that they can be temporarily moved so you could install the # TLD2100.
I also attached a video on how to fishwire bolts that might be helpful depending on access. view full answer...
Hey Miles, thanks for reaching out!
I recommend going with a Thule WingBar Evo setup on your 2013 Toyota Tacoma Double Cab. You'll need the following parts depending on if you have a naked roof or the raised side rails. I really like the Evo roof rack systems because they look really sleek, they are easy to use, and they are made with aluminum so they won't rust out over time.
Naked Roof
- 53" WingBar Evo Crossbars # TH711420
- Evo Clamp Feet # TH710501
- Fit Kit # TH145107
- One-Key... view full answer...
Yes, you can flat tow your 2002 Honda CR-V behind your F-150 using either the Blue Ox Acclaim Non-Binding Tow Bar # BX4330 or the Blue Ox Adventurer Adjustable Tow Bar # BX7322. You will need the Blue Ox Base Plate Kit # BX2232 to give yourself the attachment points needed for connecting the tow bars.
You will want to also check your local laws to verify if you are going to need a Braking System # HM39494 due to the weight of your CR-V. This would also help to reduce wear and tear on... view full answer...
Go To Results