The etrailer Electric Trailer Brakes # AKEBRK-6 will likely fit your 5,200 lb AL-KO axle. These are 12" x 2" with a 5 bolt brake flange mounting pattern. I recommend checking your brake flange just to be sure. If you have the older 4 bolt AL-KO pattern and not the standard 5 bolt then you need the # 23-105-106-09 instead. view full answer...
Yes, your black spare that you have is one that is compatible with the etrailer hitch part # e98844. It's only the aluminum wheels that won't fit and what you have is not the aluminum one Nick. view full answer...
Hey Roland, good question and the answer is you can leave your 18 inch spare tire on your 2022 Dodge Durango and still install the Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR. view full answer...
Hey Dolores, for your 2009 Dodge Ram 2500 we have the Curt hitch part # C15809 that fits and would work really well. It has great towing capacities and fits if the truck had the factory hitch or didn't have it. view full answer...
The 8534C8797 is showing as a 15,000BTU unit so the 48008-969 (13,500BTU) would technically connect and work, but wouldn't be as efficient at cooling the trailer. The Furrion Chill HE Replacement RV Air Conditioner for Coleman Setup - 15,000 Btu # FR42PV you were looking at would however be a compatible fit since it comes with an adapter to connect to your system's 9-pin plug. This unit, as well as the others that we currently offer, does not have a heat pump so you would be losing this... view full answer...
The Thru Axle Bike Carrier for Rhino-Rack Pioneer Platforms # RR43233 is not compatible with the T-Track on the Thule Crossbars. The Rhino Rack carrier uses 20mm track nuts and the T-channel on the Thule WingBar crossbars is only 3/4" or 19mm, so the hardware would not fit into the T-track.
If you are needing a bike rack that will work with the T-Track on the Thule Crossbars, we do have options. My recommendation is the Thule ProRide XT # TH598004. This can be clamped to the crossbar... view full answer...
Hey there Toby, the answer to your question is yes it sure does. Yakima HD crossbars like # Y01156 measure 3" wide x 1-1/2" tall which is within the parameters of the Thule Basin Rooftop Tent # TH32VY.
This tent fits on crossbars that are a maximum of 3-1/4" wide x 1-1/2" tall so it will mount superbly to the Yakima bars.
You made a really nice choice here with the Basin # TH32VY because not only is it a roomy and comfortable tent, but you're also getting a cargo box out of it since it... view full answer...
Hi Ed,
If I'm understanding you correctly your trailer's frame is 3" wide and the coupler needs to have a 2" ball. If so the Demco Channel Tongue Trailer Coupler # DM15000-52 you were looking at would be a compatible fit. I've attached a little diagram below showing the bolt pattern so that you can check if it will match up to the current pattern so you can avoid drilling into the frame.
If you instead have different sizing or need something different then let me know and I'd be happy... view full answer...
Thanks for the pictures but no, the EX2700 tonneau cover that the # EX1700 fits is for a 2004-15 Nissan Titan 6' 7" Bed.
The one previously mentioned # EX1770 is for your truck, so it'd for sure work if you have the 2770 tonneau cover. view full answer...
If you have 10" octagonal or concave round jack feet on your Baystar, then the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet # SN76FR will work great.
If not, you're going to have to measure your jack feet and take note of it's shape and let me know what you've got and I'd be happy to help. view full answer...
The Dometic RV Water Heater # DMC74FR is the only non-tankless option that we currently offer. RV water heaters have dropped in size quite a bit the last few years so you'd likely have to do a bit of framing in order to mount this unit. This system only comes with a 6 gallon tank and requires 120v power so you'd be sacrificing efficiency and might have to run a new outlet if your previous unit used 12v power.
Most manufacturers are transitioning to tankless but I believe you can still... view full answer...
Thanks for the question Robert, and while it is likely the K-Source Universal Towing Mirrors # KS3891-2 fit your 2024 Lexus RX350, neither we or the manufacturer have test fit them yet, so I can't guarantee it. However, these do fit mirrors that measure between 4-1/2" and 11-1/2" tall, which is very likely what the mirrors on your Lexus measure, but you'll just want to verify that first. view full answer...
Hey Donna, while it is likely the K-Source Universal Towing Mirrors # KS3891-2 fit your 2001 Ford Escape, we haven't test fit them on the vehicle, and I checked with the manufacturer, who hasn't either, so there's no guarantee. That said, these do fit mirrors that measure between 4-1/2" and 11-1/2" tall, which is very likely what the mirrors on your Escape measure, but you'll just want to verify that first. view full answer...
The only thing like that I'm aware of is the B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3500. The only caveat is that it exclusively works with the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1313.
So, the only way you'd be able to do what you're wanting to do is to install the Turnoverball mentioned above, and then use the B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3500. view full answer...
Thanks for reaching out, Dan!
The etrailer Invisible Base Plate Kit # e86YR will fit perfectly fine with the Tremor skid plate on your 2022 Ford F-150. The base plate will take the place of your tow hooks and while the Tremor package looks a little different, the tow hook locations are the same so you're good to go!
Attached is an installation video and a photo of this kit on a 2023 Ford F-150 for your reference.
For a complete flat towing setup you will need a base plate kit, tow bar,... view full answer...
Hey Simon thanks for your question. The Curt A16 5th Wheel Trailer Hitch w/ Slider # C16520-16020 weighs just shy of 260 lbs. That is both components together so the head unit and the slider base. If you separate them the base is about 170 lbs and the head is about 90 lbs. This hitch is going to fit your 2024 Ford F-350, provided you have the OEM puck system in the bed. view full answer...
Yes, for your 5.70x8 tire we have the Adco Ultra Tyre Gard RV Tire Covers for 18" to 22" Tires # 290-3975. These will fit 18" to 22" tires, has an easy slip on design, and has bungee cords inside to ensure a tight, snug fit. view full answer...
No, the Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows # SB397-007 is not going to work with your 2008 GMC Sierra 1500.
What you're going to need is the Custom Mounting Brackets for Detail K2 Snowplows # K283012 which is going to work with both your SnowBear snow plow, and your 08 GMC Sierra 1500. view full answer...
The only custom hitch we can confirm will fit your 1999 Ford Super Duty with the Ranch Hand Legend rear bumper is the Curt # C14355. This is a Class IV hitch instead of V with a 10,000 lb max gross trailer weight. It looks like even if you have the F-350 the max towing capacity for the vehicle is 10,200 lbs so this hitch should be adequate.
If you're still set on a Class V we have the # C15810 but I can't confirm this is compatible since it hasn't been tested. The hitch mounts in the... view full answer...
We don't currently offer any hitch mounted spare tire carriers with a swing-away function, but you could get a swing-away adapter like the Yakima BackSwing Swing Away Hitch Extender for Bike Racks # Y02483. This would mount in your Q7's 2" trailer hitch and allow you to mount the # e98ZR into the 2" receiver tube opening. Since this is an adapter it will reduce the hitch's capacity by 50% so you'll want verify the weight of the wheel/tire along with the weight of the carrier (35lbs) to... view full answer...
Go To Results