Draw-Tite trailer hitch # 24871 will fit your 2008 Chrysler Sebring convertible with dual exhaust. It can be used to tow a rental trailer. The hitch has a 2,000 pound gross trailer weight capacity but check the vehicle owners manual to the Sebring's capacity and go by whichever is lower.
You will need the proper ball mount, part # 3594. To add a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you can use # 118444 to add a 4-Way flat connector. I have... view full answer...
Yes, Thule does list the OutWay 2, # TH45JV, as a fit for your 2004 Chrysler Sebring sedan. I had a chance to use the OutWay series of racks and they are probably the easiest racks to put on/take off. What makes it so easy is because it uses retractable cables instead of straps to secure to the vehicle.
If you will be carrying women's, children's, or alternative frame bikes, I recommend using the bike adapter bar, # TH982XT, in order to hold the bikes more level. I have included links... view full answer...
The Rhino-Rack square bar 2500-Series roof rack made of parts # RRVA126B-2, # RRRLKVA, and # DK199 is a confirmed fit on your 2010 Chrysler Sebring 4-door. Both the Swagman Upright Roof Bike Carrier # S64720 and the SportRack J-Style Kayak Carrier # SR5511 are fully compatible with this roof rack.
Installation videos for all three products are linked for your reference. view full answer...
We do have some roof racks that fit your 2009 Chrysler Sebring.
Out of our selection I recommend going with the Rhino-Rack Vortex Aero roof rack. This consists of the 49" Crossbars # RRVA126B-2, the 2500 Series Legs # RRRLKVA, and the DK Fit Kit # DK199. The great thing about the aero style crossbars is that they cut down on wind noise and drag when compared to traditional crossbars.
The kayak carrier that I recommend using is the Rhino-Rack J-Style Kayak Carrier # S512. This mounts to... view full answer...
There are a few trunk bike racks that are confirmed to fit your 2010 Chrysler Sebring, but my recommendation is the Hollywood Racks Express 3 Bike Carrier # HRE3 for a few of reasons.
Your Sebring has an antenna that sits on top of the trunk, which the design of the Expedition will allow you to clear. To install it, you'll need to use the holes located in the vehicle frame for attaching the hooks and take extra care when attaching them on the top seal.
This lightweight trunk rack comes... view full answer...
If your 2007 Bayliner 245 cruiser is on the lower end of the length range for cover # 052963889680 then the additional slack in the cover will help it fit over the bow and side rails. This cover fits boats that are 22' to 24' (beam width 116").
This is the largest size we offer at this time. view full answer...
Yes, the Blue Ox Base Plate Kit part # BX1984 will fit your 2010 Chrysler Sebring with a convertible top. This base plate kit is an excellent option as it has removable arms which provide for a clean look while not in tow. If you are also looking for a towbar to use with this base plate kit I recommend the Blue Ox Alpha Tow Bar part # BX7380 which has a non-binding design for easy hooking/unhooking and includes safety cables.
I have attached a photo of what the base plates will look like... view full answer...
We have 2 trailer hitch options available for the 2004 Chrysler Sebring Sedan- a Draw-Tite and a Curt; I recommend using the Curt # C12186 since the powder coating on the Curt hitches is a little bit more durable, so you'll have a hitch that stands up a bit better to some of the rigors of towing. If you're going to be towing with this hitch you'll also need a ball mount, hitch ball and wiring harness to power the trailer lights.
For the wiring harness I recommend using the Tekonsha # 119178KIT... view full answer...
If you didn't damage the bolt leader you could put it back on the bolt and see if you could feed it back towards the access hole. If you can get it close to the access hole you might be able to use a flexible retrieval magnet to get it the rest of the way out. Local car parts store would have a magnet like that. view full answer...
At the time the question you are referring to was answered the hitch # 24871 was listed as a fit for all models of the 2008 Chrysler Sebring. As you have found that has since changed rendering that answer irrelevant so I thank you for finding it and bringing it to my attention.
Draw-Tite and Hidden Hitch are sister companies so hitch # 24871 and 60288 (discontinued) which DO fit the convertible are basically identical. They even share the same instructions. The difference is that the Hidden... view full answer...
Many companies, like Thule, use their own in-house design for parts and accessories. The only locking hitch pin/anti-rattle device that will work on Thule Roadway Bike Racks, like TH912XT, TH914XT, or TH915XT, would be the Thule brand. The bike racks have a uniquely threaded hitch pin hole that matches the design of the lock. You would need Thule Snug Tite Hitch Lock and Anti-Rattle Device, # THSTL2. I have included a link to a video review of this lock for reference. view full answer...
Since trailer lighting can't work in reverse what you'd need is tow bar wiring/lighting so that you can operate the taillights of your 2008 Chrysler Sebring in conjunction with your tow dolly wiring. For that you can use the diode kit part # RM-154 which will wire into your vehicle taillight wiring and give you what you are looking for in that regard.
For a brake controller that can switch between your two vehicles easily the best option is the Curt Echo # C51180 which basically just... view full answer...
Yes, I have a few hitch bike racks that will fit your 2000 Chrysler Sebring Convertible. They will attach to a trailer hitch on your vehicle and be able to carry 2 bikes. The maximum number of bikes that your Sebring Convertible can carry will be 2 bikes. I am including a link to a page that will list the choices of hitch bike racks that will work on your vehicle.
If you need a hitch for your vehicle I would have the Curt Class I 1-1/4 Inch Hitch, part # C11187. This hitch is an easy bolt-on... view full answer...
For a hitch for your 2002 Chrysler Sebring the Draw Tite hitch part # 36301 would work well for you as it has a 300 lb tongue weight capacity. This is a 1-1/4 inch hitch though.
The Curt Cargo Carrier part # C18110 also has a 300 lb tongue weight rating and should work well for you as well. This carrier only weighs 30 lbs as well. I attached videos for both products I mentioned. view full answer...
The Camco Wrench for Screw-In Water Heater Element # CAM09883 is a socket for the 1-1/2 inch nut on water heater elements. You can however use a box end wrench, channel locks, or a plumbers wrench if needed. Often sediment and corrosion can make it difficult to remove an old element so a good connection is important. view full answer...
The only trailer hitch receiver option for your 2008 Chrysler Sebring Convertible is the Draw-Tite Sportframe # 24871, which is only a Class I hitch. Due to the design of your Sebring, there are no Class II options available. This trailer hitch has a Gross Trailer Weight (GTW) of 2,000 lbs and a Tongue Weight (TW) of 200 lbs. I checked an online version of a manual for you Sebring and if had the same weight capacities that this hitch has, but you will want to check your copy of the owner's... view full answer...
For a 2004 Chrysler Sebring Sedan, the confirmed Curt hitch is # C12186. The Curt Hitch # C11190, that your referenced is confirmed to only fit 2001-2006 Chrysler Sebring Convertibles.
The Curt hitch # C12186 hitch is a Class II rated hitch that uses the 1-1/4 inch receiver opening. This is designed to custom-fit your 2004 Sebring and has a 350 lbs tongue weight capacity. view full answer...
Yes, the Hollywood Racks Trunk Rack part # HRE3 that you referenced has been confirmed as a fit for your 2005 Chrysler Sebring convertible. As long as you do not overload this rack (35 lbs per bike) and keep the painted surface of your vehicle where the rack would touch clean this rack would fit and work well without causing any damage.
Hollywood Racks also recommends taking extra care when attaching the upper straps so you would want to be aware of that as well.
If you plan on carrying... view full answer...
Base plates and tow bars are sold separately since the base plates are vehicle specific and the tow bars are not. The first thing you are going to want to do is consult the vehicle owners manual to determine if the Sebring can be flat towed and if so if there are any special requirements. I have included a link to the base plate main page for your Sebring. There are different base plates for different versions of the car. Once you have determined which base plates will fit you can then... view full answer...
It sounds like you are having issues with your running lights which are actually on a separate circuit than the stop/turn lights. The first thing you will want to do is test the running light pin on the vehicle side trailer connector. If you don't get power here then you may have a blown fuse or shorted wire. If you do have power then apply power to the running light pin on the trailer side trailer connector. If the lights do not work then you most likely have a short in the running light... view full answer...