The Advent Air Replacement RV AC Unit part # ACDOM150 was designed to replace the Duo Therm unit you have now so it would work great and install very easily. It uses same connections and mounting as your old unit so the install would be super simple. To add a heat strip to it all you'd need is the part # ACMHD and you'd be set with everything you need. view full answer...
In order to carry 5 bikes with your 2009 Nissan Maxima you're either going to need to use a trailer or a combination of a hitch mount bike rack and a roof rack bike rack system because the only hitches that fit your vehicle are Class I hitches which are limited to only carrying 2 bikes. This means you won't be able to use the Curt Premium 5 Bike Rack # C18065.
Since it will be a bit more cost-effective and easier to maneuver your vehicle around by mounting 3 of the bikes to your roof that's... view full answer...
The pins of the Base Plate kit part # 321-1 would be pretty easy to access. I attached a diagram that shows that the pins go through the side of the receiver tube on the base plate kit. view full answer...
Though currently we do not have a hitch confirmed to fit your 2022 Nissan Maxima there is other ways you can haul bikes or extra luggage around if needed.
The Yakima FullBack 3 Bike Rack - Trunk Mount - Adjustable Arms # Y02633, can carry up to 3 bikes at 35 pounds per bike but we when you carry 3 bikes its 30 pounds per bike. The rack comes with an integrated cable lock that will help secure your bikes to the rack.
The Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars... view full answer...
For your 2005 Maxima one of the nicer roof racks I recommend is the Rhino-Rack Vortex roof rack. This roof rack has aerodynamic aluminum crossbars that have rubberized Vortex strips in the top channel to help provide a quieter ride. This kit comes with the crossbars, legs with built-in locks that secure the roof rack to the roof of your vehicle, and custom clamps and pads to ensure a good fit for your Maxima. For this system you would need to order part # RRVA126B-2, part # RRRLKVA, and... view full answer...
The Curt Trailer Hitch Receiver part # C11352 is an excellent option for a 2013 Nissan Maxima. It has a 1-1/4" receiver tube opening with class I rating so it will work with any bike rack that has these features and there are plenty to choose from. The Thule Camber 2 Bike Rack part # TH9058 is our most popular option as it offers premium features at a very reasonable price. It would work wonderfully with two mountain bikes. view full answer...
For your cruiser bike and most bikes with alternative frames you will need to use a bike adapter bar such as # 64005 to be able to load the bike on a bike rack with 2 arms such as # HRE3. This will allow you to mount the bike to the rack. The adapter creates an artificial horizontal top tube so it fits on the rack. They are very easy to use. You will also need to make sure that your Cruiser ways 35 pounds or less. I have linked a video showing how it works. view full answer...
In regards to tire cables like the Glacier Cable Snow Tire Chains part # PW2029C, longevity is difficult to calculate as there are several factors such as time used, road conditions, vehicle weight etc. The best advice I can offer to improve longevity would be to make sure and rinse them off after use and then dry them before storage. view full answer...
The 2006 Nissan Maxima K-Source Replacement Side Mirror - Electric - Black - Passenger Side, # KS68555N, does not come in any other color. If you want it to match your vehicle paint color, I suggest going to a local auto parts store and getting paint to match. view full answer...
We offer several choices in a light-duty 1-1/4-Inch Class I trailer hitch for your 2014 Nissan Maxima. All can be seen on the link provided. The one I suggest is the Draw-Tite # 24796. This hitch is my recommendation because it offers the same capacity as the others but has a lower cost, and because it does not require use of a stabilizing strap like some. The linked video illustrates the installation process and two helpful hitch install articles are also included.
A Class I hitch has... view full answer...
Yes, the Thule OutWay 3 Bike Carrier, # TH56BV, will fit on the 2005 Nissan Maxima.
This rack is tested for carrying up to 99 lbs on the back of vehicles, and will work great with your 3 road bikes weighing approximately 60 lbs., as long as the rack is properly installed.
One tip that I can offer, is that you should position the heaviest of your bikes closest to the vehicle and the lightest bike out farthest. Always carry bikes as close to the vehicle as possible if carrying fewer than... view full answer...
While there is certainly a way to carry bikes or cargo with a 2014 Nissan Maxima a panoramic glass roof, I checked with our rack manufacturers, and there are no options for a roof rack fit. So you do have a couple choices, depending on what you are looking to haul.
For just bikes, you can simply use a trunk-mounted bike rack that fits, and an options that is high quality but still economical is the Thule Passage 2-Bike Rack # TH910XT.
I have added a link below to a video review of the... view full answer...
I completely understand wanting to know exactly what you are ordering before it arrives. The SportRack Semi-Custom Roof Rack for Naked Roofs # SR1002 is a complete kit and is confirmed to fit your 2011 Nissan Maxima.
It comes with 2 cross bars that are 50 inches long, 4 feet to mount the bars to you roof, 2 per cross bar, and an allen wrench to tighten everything up. view full answer...
The Derale Series 9000 Plate-Fin Cooler # D13611 would be an excellent choice for use on your 2011 Nissan Maxima. Transmission coolers are not vehicle specific, but there are coolers that are recommended based on available mounting locations of your vehicle.
It is always recommended to use the most efficient mounting location that is possible. Typically this is located between the AC condenser core and the grille. If the ideal and most efficient mounting location is not possible, then... view full answer...
The Curt Class 1 Hitch # C11264 which is a fit for a 2005 Nissan Maxima I can confirm does not come with a hitch pin and clip. That said, we do sell this separately using the Pin and Clip For Class I and II Trailer Hitch Receiver Hitch part # PC2. The pin and clip is usually included with the accessory but very rarely if ever included with the trailer hitch.
I have attached a list of some hitch mounted accessories you may be interested in as well below view full answer...
Yes, the Replacement Water Valve for Pedal-Flush Dometic RV Toilet # DOM55FR will fit both toilet models (510+ and 2010).
The product model identification label is located on the toilet base under the pedestal cover (see photo), just in case you haven't checked there. view full answer...
First, you will not have to purchase different bulbs, the factory ones in the car will work fine with wiring harness # 119178KIT.
Normally we have customers use the included circuit tester to find the correct wires. Using your multi-meter is even better. We have not had the chance to install this harness on a 2000 Nissan Maxima so I cannot tell you what the wire colors are. But if you do re-test the wires and come up with the same functions as you have here, that would indicate you have... view full answer...
For your 2000 Nissan Maxima I would recommend you get a 20x48 Cargo Carrier # 52017 as this cargo carrier is compatible with vehicles that have Class I hitches like what would be on your vehicle. This carrier would do well on your 4,000 mile road trip.
The Cargo Carrier # 63155 that you referenced might not work for you since it is designed for vehicles with Class II hitches and there are no Class II hitches available for your vehicle. It fits some Class I hitches but not all of them.... view full answer...
Before any of our hitch manufacturers will release a fit for a vehicle they always test fit to be certain. Especially Draw Tite and Hidden Hitch. They seem to release fits later than Curt and rarely if ever do they get it wrong. They are incredibly cautious about carrying over a hitch fit from the previous year.
That being said the Draw Tite hitch part # 24796 is going to fit your 2016 Nissan Maxima despite the differences on the vehicle you noted. I attached an install video that shows... view full answer...
On their Class I, II and some of their Class III receiver hitches, Curt requires the use of a stabilizing strap like part # 18050. The strap is designed to provide extra support for bike racks and other non-trailer loads, and is sold separately. The strap consists of a plastic coated steel hook on one end that would slip over the front edge of the trunk or hatch lid, and the other end would loop around the bike rack. If you click on the provided link, you can see a video that illustrates... view full answer...
Go To Results