According to the Thule Fit Guide, the Thlue Flat Top Ski and Snowboard Carrier, part # TH7326 should fit just fine onto the factory cross bars. I have added a link to the installation instructions below. If your cross bars measure 2 inches by 4 inches, the THXADAPT7 bolt kit will probably be needed. view full answer...
Yes. you are correct! You will connect the Tekonsha # 3015-S to the brake controller wires on your RedArc Tow Pro Elite # RED44FR matching them color for color. You can then plug the end of the adapter into the brake controller port on your 2003 Hummer H2. view full answer...
To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts:
- 60" JetStream Crossbars # Y00426
- SkyLine Towers # Y53TR
- Landing Pad 4 # Y00224
This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed.
The Pioneer Platform # RR85ZW... view full answer...
Judging by the sticker on your bars it does look like those are the factory bars. The Aries Round Nerf Bars # AA204075-2 will fit on your 2007 Hummer H2 just fine in place of the OEM bars. If you'd rather have the black bars then you'd need part # AA204075 instead.
If you're looking for replacement hardware you'll need to get that from General Motors as hardware will need to be a direct replacement. Nerf bars can use specific hardware per each manufacturer which is why it needs to be a... view full answer...
Yakima's spare tire carrier will accommodate tires up to 35 inches in diameter. According to my calculations, your tire comes in just under that at 34.36 inches.
The tire rack is pretty stout, I do not think stability will be a problem. As far as wind noise goes, the fairing included with the MegaWarrior Roof Basket will certainly lessen the wind noise. Mounting the tire as close to the rear of the basket as possible will help minimize wind noise as well.
Just make sure you do not exceed... view full answer...
Yes, for your 2003 Hummer H2 with factory raised siderails the Surco Safari Rack 5.0 Rooftop Cargo # SPS4560-1101 has been confirmed as a fit. view full answer...
It's totally normal to splice on some extra wire to the 12 Volt Outlet Kit # RM-9332 to get it to the battery so I would just use some 16 AWG # 16-1-1 and a butt connector # DW05744-10 instead of using the extension # RM-9331. The extension would technically work but just splicing in more wire is a bit cleaner of a setup. view full answer...
Either hitch pin hole of the B&W Tow and Stow Ball Mount part # BWTS10049B can be used in the hitch of your vehicle. Whichever one works for your towing application best will be perfectly fine. view full answer...
Yes, the Tekonsha Wire Replacement for GM Vehicles, part # 3015-P,and the Tekonsha Prodigy P2 Proportional Brake Controller, will work on 2003-2007 Hummer H2, so it would work on your vehicle.
Even though the title says it will fit 2003-2006 GM vehicles there are a few 2007 GM vehicles, such as the Hummer H2 and the 2007 classic body style GM trucks, that it will work on.
I included a video below of the brake controller and wiring harness being installed on a similar 2007 vehicle as... view full answer...
The Replacement Step Pad for Aries 3" Wide Oval Nerf Bars # AA86FR measures 6.496” apart center-to-center for the inner pins, and the two outer pins measuring 17.795” apart center-to-center.
It's not uncommon for replacement pads to fit from one brand of nerf bars to the next, but we unfortunately don't have a list to show if there are any cross-reference fitments. view full answer...
The Aries Automotive # AA204075-2 includes the step bars, the mounting brackets and all hardware necessary for completing the installation.
This application is indeed compatible with your 2005 Hummer H2. view full answer...
Thank you for your prior purchases from etrailer!
Towing a trailer with electric brakes will require that you install a trailer brake controller in your 2007 Hummer H2. The unit I recommend is the Prodigy P2 # 90885. This reliable and highly-rated controller is easy to set up and operate, it works with both electric brakes and electric-over-hydraulic brakes and it includes advanced features like built-in diagnostics and a bright LED display.
In your H2 you'll use wiring adapter # 3015-P... view full answer...
Yes, if you have the Firestone Coil-Rite Air Helper Springs # F4108 kit in your 2003 Hummer H3 you would want a Replacement Air Spring # F6003. view full answer...
For your 2006 Hummer H2 with factory roof rack you can use the Thule SUP Shuttle, # TH811XT, to carry your standup paddleboard. I have included a link to a video review for you.
This carrier has a 2 board maximum capacity and is rated for 110 pounds. It will accept a paddleboard up to 34 inches wide.
You could also use the Yakima SUPDawg, # Y04075, which can also hold up to 2 boards and has a 66 pound capacity. But, it can hold boards up to 36 inches wide. I have included a link to a... view full answer...
So first, your 2004 Hummer H2 does have to be stock to use the Superchips Flashpaq F5 Performance Tuner - GM - Gas/Diesel # SU2845.
If yours isn't, you'll need to take it to a GM dealer to have them return it to stock. As for returns, once something is used, it cannot b returned. And insofar as if the # SU2845 will be beneficial to your '04 Hummer, yes, it absolutely will.
It has numerous tunes, including performance, that allow you to get the most out of your Hummer. view full answer...
The Roadmaster MS Base Plate Kit - Fixed Arms # 2503-1 does not have the removable connections like the # 2506-1 or even the # 2506-3. The removable option gives you a cleaner look when not connected, but the connection will be similar. The # 2506-1 style of arms is compatible with Quick Disconnects and all Roadmaster tow bars, where the other options are not able to use the Quick Disconnects and are not compatible with coupler style tow bars. This compatibility is the only reason why... view full answer...
We have not yet tested the Curt Roof Mounted Cargo Basket part # C18115-117 on a 2006 Hummer H2 with a factory roof rack therefore, in order to determine compatibility you would need to do a bit of measuring on your Hummer. For starters, the Curt cargo basket works with crossbars that are spaced between 22 and 50 inches apart on center and do not exceed 3" wide x 1-5/8" tall. Therefore, as long as the factory roof rack on your H2 fits these two criteria then it will work well for you. Unfortunately,... view full answer...
If the hitch on your 2007 H2 is a 2-inch size then you can use an adapter/extender like the Curt Hitch Extender # C45796. However, you need to be aware that use of any extender will reduce your hitch's tongue weight and towing weight ratings by 50-percent.
This loss of hitch capacity results from the change in the geometry of the forces on the hitch. In the same way that slipping a length of pipe over a tire iron gives you more leverage to loosen a stubborn lug nut, using an extender... view full answer...
I checked with Timbren and they have confirmed that the Timbren Rear Suspension Enhancement System # TGMRH2 that you referenced is compatible with your 2005 Hummer H2 with auto-leveling air ride suspension.
I attached installation instructions and an FAQ on Timbrens for you to check out. view full answer...