I may have another option for you, but Blue Ox does not offer a base plate kit for your 1987 Chevrolet Blazer Full Size.
Currently the only base plate kit confirmed to fit your vehicle is the Roadmaster Crossbar-Style Base Plate Kit # 108-1. This base plate will pair nicely with the Roadmaster Falcon 2 Tow Bar # RM-520.
To complete your flat tow setup you would need the following parts if you do not already have them:
Wiring # RM-15267
Safety Cables # RM-643
Supplemental Braking System... view full answer...
I have a replacement option for you, but unfortunately the Curt Trailer Hitch Receiver off of a 2010 Chevrolet Equinox will not fit on a 2019 Chevrolet Blazer.
Instead I recommend installing the Curt Trailer Hitch Receiver # C13418 as long as the Blazer is not a premier model, or the Draw-Tite Max-Frame Trailer Hitch Receiver # 76023 if it is a premier model.
If you are planning on towing with your Blazer you will also need a trailer wiring harness # 118720 and a ball mount, hitch ball,... view full answer...
We do not actually do any tests of the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls - 15K # C83WR because we do not manufacture the item, it is simply a product we offer for sale. As for your other questions, the core is made of polyurethane; there is not a specific amount of time it is expected to last; and it will do just as well in cold weather as it does warm weather.
In regard to the anit-rattle # e99007, it can be used but is not at all necessary... view full answer...
In order to prevent the trailer hitch third brake light on your 2000 Chevrolet Blazer from flashing when using the turn signals, you will need to install the Vehicle to Vehicle Taillight Converter, # 118158. This converter will work with the LED trailer hitch brake light. LED lights are only a concern if they are on the vehicle and the converter draws power from them.
The Vehicle to Vehicle Taillight Converter, # 118158, separates the signals so the third brake light will only illuminate... view full answer...
For the easiest to use solution I would still go with the hitch mounted bike rack and just live without having a completely unobstructed view with the camera, because the alternatives are problemsome. A "trunk mounted" bike rack does not position the bikes any better. The SeaSucker suction cup mounts will not work properly in the back as there is not a flat area where the rear tires would go.
If you must use the camera unobstructed then this leaves you a roof mount option. You should... view full answer...
We do have a way to order replacement hardware for the hitches we offer with the part number # RHK. With this part number you'd select the hitch manufacturer you have from the drop down menu and then enter your hitch part number into the parts box and we'd ship you out the correct hardware for your hitch. view full answer...
There are quite a few mounting brackets available for attaching your 2022 Chevy Blazer's 4-pole wiring harness # C56325 to your Curt Trailer Hitch Receiver # C13418, but I personally recommend using the # 18140 and # 18144 together to quickly and easily secure your 4-pole plug. view full answer...
For your 2004 Chevy Blazer 4x4 2-door we have the Curt hitch part # C13300 that you referenced as a confirmed fit. This is a great hitch that would work well on your Blazer. I attached an install video for you to check out as well. view full answer...
The frames and designs of the 1999 Isuzu Hombre and 2001 Chevy Blazer are different enough that the same trailer hitch will not fit both vehicles. You will need a new hitch for your 2001 Chevy Blazer.
For a Draw-Tite hitch that is confirmed to fit I recommend the Class III Max Frame Round Tube Receiver Hitch # 75079. This custom hitch will use existing holes in the Blazer's frame for a no-drill installation. It will provide you with a 2 inch receiver opening and it has a 3,500 pound towing... view full answer...
I can certainly help you out ensuring you have all the correct parts to install a brake controller. Since you decided on the Curt TriFlex # C24VV, and don't have a harness port in your '79 Blazer, you are correct that you'd need adapter # C51515.
It will also be necessary to add the wiring, which comes with the # ETBC7, and along with that you'll need a 4-way, and # 118311 is a confirmed fit for your Blazer and will work with the ETBC7. Finally, the 7-Way Connector # 50-67-106 is going... view full answer...
While we don't have a video that shows the install of the Draw Tite part # 76023 on a 2019 Chevy Blazer Premiere we do have the Acadia install video that you referenced which shows the exact same process. The vehicles share the same platform so the hitch fits and install procedures is the exact same. view full answer...
Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are based on our preassembled kits, so we will use that as a foundation for your setup.
First, I would either replace all of the front and rear hangers with 2-1/2 inch tall hangers like part # 115918 or replace just the center hangers with 2-1/2... view full answer...
I recommend the CIPA Universal Towing Mirrors # 7070-2 as the best option for your 2024 Chevrolet Blazer. These mirrors have adjustable arms which will conform to your mirrors and help to reduce vibration. The simple strap system is easy to use and reduce the chances of damage caused by other more complicated strap systems. You can also get either Replacement Straps # 11952STRAP or a single Mirror # 7070 should something happen to one of the mirrors. view full answer...
If you go with the Aries grille guard # AA4044 for your 1999 Chevy Blazer then it can work with Curt front mount receiver # 31021. The Aries guard mounts through where the tow hooks are on the front of the vehicle (see instruction link). The Curt hitch mounts to the bottom of the frame. It will be close as far as the hitch cross tube and the body of the guard but I am confident that it will work with little to no modification. view full answer...
The standard lengths of Erickson E-track that we offer include the 5-foot # E19148 as well as 4 and 2-foot lengths. We also offer small single-, double- and 4-slot tracks for tight spaces. All can be seen on the link provided.
The E-tracks are galvanized 12-gauge steel so to cut one to your required size you'll need to have a suitable saw blade that can cut steel. You'll also want to de-burr the cut edge to keep it safe for working. view full answer...
Yes, you can absolutely pull a 1500 lb trailer with a 2021 Chevy Blazer. Looking at the online owners manual for the Blazer it looks like there is some variance in towing capacity across different models. For example, Blazer 3LT and Premier trims are capable of towing up to 4,500 lbs with the available Trailering Package in combination with the 3.6L V6 engine and available AWD. Please refer to your owners manual for specifics on your vehicles towing capacities.
That said, if you need... view full answer...
The Curt Trailer Hitch Receiver # C13300 is compatible with your 2000 Chevy Blazer with the ZR2 package. I reached out to my contact at Curt who confirmed that the frame is still the same for the ZR2 so since the hitch is at the back it will fit.
If you let me know what you plan on using the trailer hitch for I can make some recommendations if necessary.
I've also attached an installation video of this on a 1996 Blazer that you can use as a reference. view full answer...
If your 2020 Chevy Blazer has the typical blade-style 7-way trailer connector then yes, the # PK12716 Pollak 7-way to 4-pole adapter you'd looked at is exactly what you'd need to provide lighting inputs to your utility trailer with a 4-pole trailer connector. view full answer...
Yes, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # C13418, will fit your 2022 Chevrolet Blazer. It is a Class III hitch receiver with a maximum tongue weight of 750 lbs and a maximum gross trailer weight of 5,000 lbs.
I have included a product description link and a video installation link below. view full answer...
The Curt Echo # C51180 will work with your 2003 Chevy Blazer. To install it would require the use of Installation Kit # ETBC7L and a 4-way connector # C58044.
I have added a link to video reviews for you as well. view full answer...
Go To Results