Compatibility of Parts to Install Brake Controller in 1979 Chevy Blazer
Question:
I have chosen the following parts for my trailer and vehicle. I have a 16 foot dual axle trailer with 2 brakes and a 1979 K-5 Blazer 4x4. Can you please tell me if they are a good fit and work well together before I purchase them? C24VV ETBC7 C51515 118311 50-67-106 Thank you
asked by: John S
Helpful Expert Reply:
I can certainly help you out ensuring you have all the correct parts to install a brake controller. Since you decided on the Curt TriFlex # C24VV, and don't have a harness port in your '79 Blazer, you are correct that you'd need adapter # C51515.
It will also be necessary to add the wiring, which comes with the # ETBC7, and along with that you'll need a 4-way, and # 118311 is a confirmed fit for your Blazer and will work with the ETBC7. Finally, the 7-Way Connector # 50-67-106 is going to fit into the 7-way of the ETBC7.
You have chosen wisely, and will be good to go for a brake controller install.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt TriFlex NEXT Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- CURT
more information >
Universal Wiring Adapter for Curt Trailer Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Universal
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
7-Way Molded Connector w/ 18' Cable - Trailer End
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 11 - 20 Feet Long
- Plug and Lead
- 7 Round - Blade
- Bargman
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: What Are the Torque Specs for Trailer Suspension Parts
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What Wiring Diagram do You Have for the Hopkins 7-Way # HM40975 on My Ford F-350?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Surge Brake Coupler For a EZ Loader Boat Trailer With Disc Brakes and Obsolete A-50 Coup
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: 30A TOW TAIL Fuse on a 2020 Toyota Tundra
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Equalizer Upgrade Recommendation For 7-3/4 Inch Long Equalizer on Tandem Axle Trailer
- Q&A: Installation of Solera Manual Pull Style to Power Awning Conversion
- Q&A: Parts Needed to Add Brakes to SureTrac Trailer with 3500-lbs Axle
- Article: Trailer Lighting Requirements
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer