The Universal Awning Fit Kit for Rhino-Rack Vortex Aero # RR31111 will attach to the Rhino-Rack Vortex Aero Crossbars # RRVA137B-2. The brackets will mount on the bars and provide you an L shaped bracket for mounting an awning.
The LED Light Mounting Brackets # RR43174 can be used for attaching different lighting kits to the top of your crossbars. These brackets can be mounted on the top channel or the bottom channel if desired to keep the top channel free for your other accessories. view full answer...
The hitch you would have on your 2004 Volvo XC70 would be a Class II 1-1/4 inch hitch like the # 36297 so you would need the 1-1/4 inch version of the Yakima Holdup, part # Y02445. This rack would work great for you.
Thule racks have been very popular for us so that is why they show up quite a bit in our popular bike rack lists. I attached a review video for the Holdup for you to check out as well. view full answer...
For a trailer wiring harness, the 4 pole trailer connector, part # C59496 will work on your vehicle.
You'll want to install the wiring harness according to the instructions, which involves running the power feed directly to the positive battery terminal, not the 12-v outlet in the cargo area. Drawing the power directly from the battery keeps your vehicle's electrical system fully isolated from any short circuits that could occur in the trailer wiring. view full answer...
We do not have any confirmed hitch fits for your 2008 Volvo C70 coupe. I confirmed this directly with Draw-Tite and Curt. Curt hitch # C11065 is a fit only for the T5 convertible model for years 2011 through 2013. I cannot recommend installing this on a car for which it was not intended. Since there are no hitch fits there are also no custom-fit plug-in wiring harness products for the car so trailer towing is not an option.
Also, there are no aftermarket roof racks available for it. This... view full answer...
For your 2022 Volvo XC60 that has flush rails you'll need a roof rack with longer crossbars to fit your two kayaks side by side which for that we have the Thule Wingbar Evo Rack part # TH711420, # TH710601, and # TH186028 which will give you a really quiet and high quality rack with 53 inch long crossbars.
Then for rear loading carriers you could use the Thule Dockglide part # TH896. The rear saddles are felt lined which allows the kayak to easily slide forward up to the front saddles. view full answer...
While I do not see any aftermarket manufacturers with a trailer hitch receiver for your 2020 Volvo S60, you may still be able to have one fabricated at a nearby fabrication shop. The Weld-On Receiver # E17 may help them to create a custom hitch on your Volvo.
I recommend also installing the Curt T-Connector Vehicle Wiring Harness # C56224 when you have the receiver fabricated. This will give you a 4-flat connector which connects to most small trailers. It will also allow for Auxiliary... view full answer...
We do have hitch-mount bike racks that fit the 2-inch hitches for your 2014 Volvo XC90 and many of these bike racks allow for full access to the car's rear hatch and cargo area. If you happen to need a hitch I recommend the 2-inch Curt # 13559 Class III hitch. This will allow you to use most bike racks including the following racks.
The most popular type of hitch rack for keeping cargo area access is the swing-away type, such as the Yakima FullSwing 4 Bike Rack # Y02465. The FullSwing... view full answer...
The available trailer hitches for a 2007 Volvo XC70 are all class II hitches with 1-1/4 inch hitch receivers. These trailer hitches have a gross trailer weight capacity of 3,500 pounds and a tongue weight capacity of either 300 or 350 pounds.
You could go with an adapter like the Brophy # HTAD which converts a 1-1/4 inch receiver to a 2 inch receiver. However, I do not recommend it because it will reduce your tongue weight capacity by half.
If you decide to go with a Class II hitch,... view full answer...
We do offer the Curt # C56287 harness for the mid-year model of the 2015 Volvo V60.
We do also have trailer hitch receivers for your V60. The link at right will let you see all options, which include both 1-1/4-inch Class II and 2-inch Class III hitches. The most cost-effective hitch offered, Curt Class III hitch # 13266, installs without drilling using included hardware and requires some trimming of the rear fascia. The written install instructions are linked at right along with two... view full answer...
The Stealth hitch # SH77FR is a confirmed fit on the 2019 Volvo XC40. For a wiring harness you can use kit # C59496. An installation article is linked for you to show how this 4-pole wiring harness kit will install.
You could also check out the Stealth Hitch for Towing # SH77FRT. It comes with a ball mount with ball and trailer wiring. This trailer wiring will need programmed at the dealership. view full answer...
The hitch you're needing is the Curt Class II, part # C12207, which we do offer.
If you were wanting to use the hitch for towing purposes (as opposed to using it as an attachment point for a bike rack or cargo tray) you'll also need a trailer wiring harness like part # 119178KIT, a ball mount like part # C45017 and a trailer ball like # 19256 for a 1-7/8 ball or # 19258 for a 2 inch ball. view full answer...
It appears you will need to have a custom receiver fabricated for your 2019 Volvo S60 T5 Inscription. We have the 1-1/4" # E-911 or 2" # E-9 receiver tube that you can use to have a receiver fabricated. Currently none of our aftermarket manufacturers are producing a receiver for your Volvo.
I was able to verify with Curt that their T-Connector Vehicle Wiring Harness # C56224 will fit your Volvo and give you a 4-way flat connector. This will connect to the tail lights on most small trailers... view full answer...
The Curt vertical receiver adapter, part # C45013 is designed to work only with the Curt Stealth Hitch, but it might possibly work with other vertical receivers. We currently don't offer a vertical hitch receiver, only an adapter.
The crucial dimension will be distance from the center of the hitch pin hole on the vertical tube to the end of the receiver. If this distance is more than 7/8 of an inch, the Curt adapter # C45013 will not work for you. See the diagram to the right.
If you... view full answer...
Due to the towing limitations of the vehicle and the attachment points where the hitch would install, only a Class I hitch with the 1-1/4 inch receiver is available for the 2005 Volvo S40.
I'd recommend the Curt Class I hitch, part # C11438.
You could use a hitch adapter like # HTAD to accommodate your existing bike rack, but because using an adapter applies additional leverage to the hitch and its attachment points to the vehicle, using an adapter would reduce the 200 lb tongue weight... view full answer...
As long as your vehicle is rated for use with a weight distribution system, we have just what you would need.
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup... view full answer...
For your 2015 Volvo S60, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Item # C56224. This harness will quickly and easily allow you to install a 4-way trailer connector on your Volvo S60. The T-connector plugs directly into existing wiring. It features a powered converter that reduces strain on your wiring system and provides superior performance.
I've linked you to the install instructions and an informational video.
The # C56287 hasn't... view full answer...
For trailer wiring you'd want the part # 118411 which is a confirmed fit and would work well on your 2006 Volvo XC90.
For a ball mount for a variety of applications the best option is the part # BWTS10048B which has every ball size on it and can be set at a variety of rises and drops so it can work well on your trailers. view full answer...
While there is not a single item that will do what you are looking for you can build one quite easily. First you will need a 7-Way # C58155 which will allow you to connect directly to the trailer 7-way. Then you will need either the Custer Single Function LED Strobe Driver # STR-QRLY if your trailer has LED tail lights with up to 420 milliamps of draw, or you will need to source a flasher from a local auto parts store if you have incandescent tail lights. From there wiring is straight forward... view full answer...
It appears that none of the aftermarket manufacturers have a hitch option for your 2024 Volvo S60. I recommend visiting a local fabrication shop in your area to determine if they can help you with a Weld-On Receiver # E-912. If they determine there is no way to install a hitch below your chassis you will want to consider using another means for transporting what you need.
If you need to haul bikes the Yakima FullBack 2 # Y02634 or 3 # Y02633 bike rack which will mount to your trunk. These... view full answer...