The bigger the solar panels you go with from Go Power the more wattage you end up getting so between the 130 watt kit part # 34282730 and the # 34282729 I'd go with the 130 watt kit. The length is only 10 inches longer so overall you get more wattage without sacrificing that much space when storing them.
The amperage also increases from 4.4 amps to 6.74 amps to. view full answer...
The K-Source Replacement Side Mirror # KS70141T that you referenced is actually for a 2010 - 2013 Toyota 4Runner. For your 2010 Toyota Tacoma you want part # KS70075T instead which is electric and doesn't have the turn signal built-in. view full answer...
I have an answer for you. Unfortunately, if you have a 2012 Toyota Tacoma with (6-ft. bed), the Replacement Tarp EX68FR will not fit your truck. However, since you do not have the serial number, we have a couple options for your replacement. If you purchased the cover around the time you bought the truck, I confirmed with Extang that you will need Replacement Tarp EX43915B. This cover is a replacement for the original Trifecta. If you purchased the cover more recently (after 2017), the... view full answer...
The correct replacement tarp for the Extang Signature Series tonneau cover that fits your 2014 Toyota Tacoma 6 foot bed is the part # EX72VR. view full answer...
According to the serial number you sent in your Lippert pin box is a 1116. This means the correct Reese Goose Box replacement is part # RP94716-61301 but I have a different recommendation for 2 reasons; this pin box is only rated for 16,000 lbs and the GVWR of your Keystone is 16,500 lbs so you can potentially overload the pin box, plus the parent company of Reese was bought out not long ago (as of May 2023) and availability of a lot of their products is still up in the air so it may be... view full answer...
I contacted the manufacturer with the date code that you were able to provide and they were able to tell me that the correct replacement tarp/vinyl for the cover on your 2009 Toyota Tacoma with 5' bed is the Replacement Tarp for TruXedo Lo Pro Soft Tonneau Cover # TX1117751. view full answer...
You need the Replacement Hardware Kit # RHK for the Curt Trailer Hitch Receiver # C13264 that fits your 2020 Toyota Tacoma. You will need to select Curt from the manufacturer drop down menu and put in the hitch item number C13264 in the box. This will give you all the hardware for your receiver. view full answer...
We've checked with Lock N Roll in the past and while they don't offer a locking pin for the ball mount portion of the # 336VS511 they do know that the Fastway Hitch Lock part # FA86-00-3660 does fit it. view full answer...
According to Lippert, the # LC421484 isn't compatible with your Level Up Hydraulic Leveling System. The
# LC421484 is compatible with the # LC358590 or # LC675817 Ground Control 3.0 or the Ground Control TT automatic travel trailer leveling system, part # LC672136.
If you need a replacement keypad, you'll want to use 425306 which we offer as # LC74FR. view full answer...
The correct mounting brackets for your Westin HDX Nerf Bars # 56-12775 on your 2019 Toyota Tacoma Double Cab are the # 56-12775PK. This includes the brackets as well as the mounting hardware. view full answer...
Thank you for providing the pictures. This helps me to confirm you will need the Replacement Tarp # EX92915-20 for the Extang Trifecta 2.0 Soft Tonneau Cover # EX92915 on your 2009 Toyota Tacoma. view full answer...
To replace the tarp on your 2017 Toyota Tacoma 5' Bed Extang Trifecta 2.0 Soft Tonneau Cover # EX92830 you need the following:
- Replacement Tarp # EX92830-20 view full answer...
Yes, the replacement tarp part # EX92915-20 is the correct replacement cover for a 2008 Toyota Tacoma 6 foot bed that has an Extang Trifecta Tonneau # EX92915 installed. As long as your cover is an Extang Trifecta this is exactly what you'd need! view full answer...
The Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover, # EX92915-20 that you reference is the correct replacement cover for a 2011 Toyota Tacoma 6 foot bed that has an Extang Trifecta 2.0 Soft Tonneau Cover, # EX92915 installed.
If you have an original Extang Trifecta Series B Soft Tonneau Cover, then the # EX92915-20 is not confirmed to fit and I recommend you update your truck with the Extang Trifecta 2.0 Soft Tonneau Cover, # EX92915. view full answer...
Using the 7 and 4-Way trailer connector, # HM40975-11998, is a good idea if the harness that plugs into the factory 7-Way also was damaged. Because one end of the harness included with the connector just has blunt cut wires, you will need to wire them in to the vehicle wiring by function as follows (the colors listed below are the harnesses colors, you will need to use a circuit tester such as # PTW2992 to determine the appropriate wire on the vehicle tow package wiring harness):
Red is... view full answer...
For a replacement tarp for the Extang Tuff Tonno Soft Roll-Up Tonneau Cover # EX14910 that fits the 6-foot-stepside bed Tacoma you can use Replacement Cover # EX13910.
The cover # EX13630 you referenced fits the Tuff Tonno cover # EX14630 made for Mazda and For pickups. view full answer...
You have a Westin E-Series Bull Bar, # 31-5600, for your 2011 Toyota Tacoma 4x4. The replacement bracket and hardware kit you will need is # 31-560PK. view full answer...
Great news! I was able to go out to the warehouse and look at the SMI Stay and Play Duo # SM99251 to compare the breakaway plugs.
I found that they are exactly the same plug/key, so the # SM99905 you were looking at will work for both the Air Force One # SM99243 and your Stay and Play Duo # SM99251.
It's always better to have a replacement ready and on hand just in case. I have linked all the above mentioned parts to this page for your purchasing convenience. view full answer...
The replacement cover for the TruXedo Lo Pro QT Soft Roll-up Tonneau Cover # TX556901 on your 2005 Toyota Tacoma with a 6 ft bed can be found with part # TX5569-CVR.
If you need to replace the weather seal as well that is listed on our site as part # TX1114731 which is sold by the foot. view full answer...
The correct replacement hardware kit for the Westin Bull Bar on your 2007 Toyota Tacoma Sport will be the part # 32-160PK. This is the complete hardware kit for the Westin Ultimate Bull Bar # 32-1600 and # 32-1605, which are designed for the 2005-2015 Toyota Tacoma. It includes all of the necessary mounting hardware, including the brackets.
The Replacement Installation Kit # 32-169PK that you referenced is not the correct kit for your Tacoma, as this is a replacement kit for Bull Bars... view full answer...