To install a 7-way on your 2019 Toyota Tacoma SR5 you will either need the 7- and 4-Pole Trailer Connector Socket # HM40975 which will plug into a USCAR connector. Or you will need the Tekonsha OEM Replacement Vehicle Wiring Harness # 22117. The USCAR connector is the large round connector which will plug into the back of the # HM40975. If you do not have this particular connector the Tekonsha kit has all the wiring you will need to install a functioning 7-way and will also allow for a... view full answer...
It sounds like you have a 6-way trailer connector on your trailer. Either that or a 7-way. If it looks like the picture with 6 round pin holes you have a 6-way. If it's a 7-way it will look like the second picture with the 6 "blades" around a single pin in the middle.
Whichever one you have the easiest way to install the correct harness on your 2012 Toyota Tacoma is to start with a 4-way trailer connector. For the 4-way you can use # 118496. This installs by plugging in behind the... view full answer...
For your 2018 Toyota Tacoma, the Westin Sportsman Grille Guard - 1 Piece - Black Powder Coated Steel # 40-3885 is a confirmed fit for your vehicle. The front sensors on vehicles at this time do not have a relocation option, so you would either need to do a customized sensor relocation or disconnect the sensors so you don't get the error message if you choose to install any of the grille guards from any of the manufacturers. view full answer...
Yes, you can physically install both the Dexter Trailer Springs Over-Under Conversion Kit part # K71-384-00 and Lippert Components Standard Axle Lift Kit part # LC425750 but the taller the trailer is, the higher your center of gravity will be which could cause the trailer to become unstable. I recommend one or the other, the axle flip kit will provide more of a lift but keep in mind this only works for you if your leaf springs are under the axle. view full answer...
I guess if your trailer tongue is 4", 4-1/2", or 6" squared then the Mount-n-Lock GennyGo Generator and Cargo Carrier # MNT77FR could technically fit, but this was designed and tested for being installed on the bumper of an RV. If you were to install this on a trailer tongue then your load would be putting force perpendicular to the brackets as opposed to in line. Since this wasn't tested in this manner I only recommend using this on the bumper of your RV.
The only kind of tray that we... view full answer...
If your 2015 Toyota Tacoma has a double cab and a naked roof the Rhino-Rack Vortex roof rack to fit consists of:
54 inch Vortex Crossbars # RRVA137B-2
2500 Series Legs # RRRLKVA
Fit Kit # DK174
For a half system that will install one crossbar on your truck use:
# RRVA137B
# RRRLKVAH
# DK174H view full answer...
I am not familiar with the spacing of the holes for the OEM racks on the 2021 Toyota Tacoma Pro with Double Cab. But, the odds of the Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-490B working with those holes are slim and you will almost certainly have to drill news holes.
It is possible that some of the holes can be used, but the track will likely require more holes and different spacing than the OEM holes that are present. view full answer...
The compressor systems such as # AL25854 are not rated for tire inflation as they come. What I recommend is a system that is designed for exactly what you want to do. These systems come with separate air tanks and coiled inflation hoses. The most cost effective model is from Firestone, # F2047, and it will work with the Air Lift air bag systems for your 2015 Toyota Tacoma 4x4.
The Air Lift kit for your 4x4 Tacoma is # AL59561. Please note this system will not fit Pre-Runner models. view full answer...
I did some checking and brake controller wiring harness # HA81785-HBC for Hayes brake controllers does fit your 2006 Toyota Tacoma. view full answer...
The Rhino-Rack RLCP Leg Kit for OEM Fixed Mounting Points - Pad Mount - Qty 6 RLCP02 are not compatible with the Yakima Track System, however, I do have a fit. The Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and if you want 6 total add the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 2 # RRRLT600H. To make this compatible you will also need the Adapter Kit for Rhino-Rack RTL600 Legs... view full answer...
The Rhino-Rack Masterkey Lock Barrels # RRRK001-2 are not compatible with the Thule One-Key System Lock Cylinders # TH450200. You will have carry separate keys for your Rhino-Rack crossbars and Thule Accessories. view full answer...
I have a great alternative for you. Unfortunately, since the Swagman Pick-Up Truck-Bed-Mounted 2 Bike Carrier # S64702 installs into your trucks bed rails, it will not allow you to simultaneously use your soft-roll tonneau cover with it.
With that being said, a great alternative is the Hollywood Racks Truck Bed Bike Carrier - Fork Mount # HRT970. Since the Hollywood Racks bike carrier simply bolts onto your truck-bed rail, you will be able to fully close your tonneu cover (when the bike... view full answer...
The A/M/G American Flag 2-Inch Hitch Cover # AMG102202 will fit a 2-inch hitch receiver opening and since this is the hitch size offered for your truck this hitch cover will work fine. The American Flag emblem portion of this hitch cover is in fact American-made.
You will need a hitch pin/clip like # PC3 to hold the hitch cover in place, or you can use a hitch lock like # e98880 that we offer to secure it to your receiver tube. view full answer...
The Tailgate EasyLift, item # 74211 is not designed for the smaller sized pickups. The width of the bed is a factor and the weight of the tailgate will not allow for the tailgate to lower completely with the assist installed. view full answer...
Your 2009 Toyota Tacoma Extended, or Access, Cab will use the Westin Oval Tube Steps with Custom Install Kit, Polished Stainless Steel, for Toyota Tacoma, item # 22-5050-1475. The 22-5030-1475 is for the Double Cab and the 22-5020-1475 is for the Sequoia and is no longer available. view full answer...
There is another option but the Pop & Lock Custom Tailgate Lock # PAL8120Q you were looking at is for a 2007-2014 GMC Sierra or Chevrolet Silverado.
For your 2020 Toyota Tacoma you will need the Pop & Lock Custom Tailgate Lock # PL54FR which will not require drilling. The Pop & Lock # PL54FR will bolt to your factory tailgate handle and the included wiring harness will connect to a black and blue wire located by the driver side B-Pillar on your vehicle which allows it to be locked and... view full answer...
The replacement cam locks from global link will allow you to remove the key when in the unlocked position, but you won't find a cam lock that would allow you to latch the compartment door closed without locking it. Thumb latches, like the # 37200145 you were looking at would allow you to latch the door, but there's no locking mechanism in them.
You would need to install a slam latch like part # GL34FR in order to be able to latch the door closed and lock it as needed. I've attached a... view full answer...
Yes, the capnuts for the 60" tracks # Y01135 and 54" tracks # Y26RR are the same so part # Y8810155 would be the correct fit for your 54" tracks. view full answer...
Since there isn't a compatible roof rack fit available for your 1996 Toyota Tacoma the only way to get a mounting point above the cab would be to use a cabover ladder rack like the Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707. These racks are bit noisy on the road and don't offer much adjustability so there is also the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever # TH43001XT-600EX. This rack sits on a base that will allow you to move the towers around to fit different... view full answer...
I reached out to Westin and they said that the Platinum Series # 21-2775 and PRO TRAXX # 21-22775 will not make contact with your OEM mud flaps. They will be very close to the mud flaps on your 2023 Tacoma but it won't be enough for them to to rub and cause an issue. view full answer...
Go To Results