The best solution we have is similar to the swing away adapter you mentioned but instead you'd want a swing away bike rack like the Yakima FullSwing part # Y02465 with the snowboard/ski adapter # Y02418 and you'd have a snowboard carrier setup that fits the 2 inch hitch you have at the rear of your 2007 Toyota Sienna that can swing out and away from the rear of the vehicle when needed for rear cargo area access! view full answer...
I checked out the specs on your old Rockwood 2560G and the two aren't really too different in terms of weight, but typically we do recommend using a weight distribution hitch any time the GVWR of the trailer is more than 50% of the tow vehicle. Taking this into consideration and the added likelihood of wind becoming more of a factor, a good weight distributing hitch with sway control would be a good addition to your towing setup.
You'll want to choose your weight distribution hitch based... view full answer...
Normally for vehicles we recommend 4-way brackets like the part # 18144 which attach to the bottom of the rear bumper. We don't recommend ever drilling into the hitch. I attached an install video for this bracket as well.
Or if you really wanted to attach the bracket to the hitch you would also want the part # 18140 which would attach to the hitch tube and then would allow you to attach the part # 18144. view full answer...
For your 2020 Toyota Sienna either the etrailer.com # e98853 or the Curt # C13343 Class III hitch will offer the best ground clearance out of the available options. Both feature a 2" receiver that will sit about 13 inches off the ground when installed.
Between these two options I recommend the etrailer.com # e98853 because of its unique matte black finish that provides a rugged appearance while also being a bit more resistant to scratches. Otherwise these two units are virtually identical.... view full answer...
Since there aren't 7-way kits made specifically for your 2014 Toyota Sienna you would need to start first with a 4-way like the part # C56106 and then use a 7-way adapter like the part # 37185 to give you the 7-way you are in need of.
If you have a trailer with brakes you'd need the # ETBC7 instead with a brake controller like the P2 # 90885 and you'd be set. view full answer...
To avoid any issues with ground clearance with your 2020 Toyota Sienna, I strongly recommend a trailer hitch with a concealed crosstube because they will sit up higher and give you more ground clearance than a hitch with a visible crosstube.
When we test fit the three trailer hitches that fit your 2020 Sienna that have a concealed crosstube - the etrailer.com Trailer Hitch Receiver # e98853, Curt Trailer Hitch Receiver # C13343, and Draw-Tite Trailer Hitch Receiver # 76112 - we found that... view full answer...
We have just what you are looking for!
I recommend going with the Westlake ST235/80R16 Radial Tire w 16" Bobcat Aluminum Wheel - 8 on 6-1/2 - LR E - Black # LHAWSO513B which have a tire with the exact same overall dimensions of your 9.5R16 tire at 30.8" tall and 9.5" wide, so this would be a perfect replacement option. The included wheel has the 8 on 6-1/2" bolt pattern you are needing along with the 0 offset.
This combination has a max load rating of 3520 lbs at 80 PSI, so since you... view full answer...
The parts needed to install a set of Thule Wingbar Evo crossbars on your 2022 Toyota Sienna are part numbers # TH711400 and # TH710401. view full answer...
We have the perfect solution for you! The Curt Echo Mobile Trailer Brake Controller # C51180 plugs directly into a 7-Way connector and is controlled through a bluetooth connection to your Apple or Android. The Echo Smart Control App is free and compatible with an Apple OS that is 8.0 or newer or an Android OS that is 4.4 or newer.
If you currently only have a 4-Way connector on your 2018 Toyota Sienna, like the T-One # 118498 for an SE or T-One # 118648 for a non-SE, then all you need... view full answer...
Using a hitch mounted bike rack or cargo carrier isn't technically towing so if your owners manual say "no towing" that doesn't mean you couldn't use a hitch rack. The trailer hitch I recommend for your 2017 Toyota Sienna is the etrailer.com hitch part # E98853 which is a 2 inch hitch that has a concealed crosstube that allows it to be less visible. 2 inch hitches have higher capacities than 1-1/4 inch hitches which will be very helpful when carrying a 4 bike rack as they can be on the... view full answer...
The trailer hitch options we currently offer for a 2022 Toyota Sienna (XLE Included) are listed below:
Curt Trailer Hitch Receiver part # C22UR
Draw-Tite Max-Frame Trailer Hitch Receiver part # DT55MR
etrailer Trailer Hitch Receiver part # e56RR
The Draw-Tite Max-Frame Trailer Hitch Receiver is tested higher at 4,500 lbs and 675 lbs so although this does not mean you can tow/haul more, the extra capacity helps with peace of mind so this is what I recommend. It will be great for towing... view full answer...
I checked with Draw Tite just now and they confirmed that the # DT55MR does fit your 2022 Toyota Sienna.
If you need trailer wiring too the Tekonsha kit part # TK69FR is an easy fit and very reliable as well. view full answer...
To install a bike rack on your 2014 Toyota Sienna, you'd first need to install a trailer hitch, if you don't have one already. The Curt Class III trailer hitch, part # C13105 would be an excellent choice. The Class III hitch uses the more common 2 inch receiver opening, which would give you a better selection of hitch mounted accessories like a bike rack like the Thule Hitching Post Pro # TH934XTR or a cargo carrier like the Curt # C18151.
For carrying 4 bikes, you cannot go wrong with... view full answer...
The best trailer wiring harness that fits your 2022 Toyota Sienna is the Tekonsha part # TK69FR which has the most reliable converter box and the easiest install.
If you need a trailer hitch the Draw Tite # DT55MR is a great option as well. view full answer...
In order to lock the Surco Safari basket # SPS4560-1101 to the vehicle roof or accessories to the basket you would have to use a cable lock such as # e98891. But this would only work if the vehicle had raised side rails so you could pass the cable underneath of them. view full answer...
Thank you for your recent purchases from etrailer.com. The hitch you chose for your 2006 Toyota Sienna, the 2-inch Curt Class III hitch # C13105 is suitable for use with weight distribution and it offers adequate tongue weight capacity (500-lbs when used with weight distribution) to handle your boat trailer's estimated 350-lb tongue weight.
Weight distribution systems are selected primarily based on your trailer's actual fully loaded as-towed tongue weight. For a boat trailer this means... view full answer...
On hitches that we have installed on a 2011 Toyota Sienna, we have found that the distance from the center of the hitch pin hole straight back to clear the rear bumper measured approximately 5-1/4 inches. I do not know what the factory installed hitch measurement is, so you will want to measure from the center of the hitch pin hole back to the distance required to clear the rear bumper.
The Curt Euro-Style ball mount, # C45572, measures 7-1/4 inches from the center of the hitch pin hole... view full answer...
I checked with Kat's Heaters and they show the FL position on the engine block for your 2013 Toyota Sienna with the V6 3.5L engine as the correct location for the Block Heater Cartridge # KH11813. When you are looking under the hood at the front of the van this will be furthest right (towards the driver side) point of the engine block closest to you. view full answer...
For your 2007 Toyota Sienna the Curt hitch part # C13105 is a confirmed fit. Then for trailer wiring the part # C55580 is a confirmed fit.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount... view full answer...
We do have Air Lift suspension kits that fit your 2005 Toyota Sienna like the AirLift 1000 kit part # AL60732 but the 5000 series is not a fit for your vehicle due to the coil suspension. This specific kit is for trucks.
I attached a picture and install video for this kit on a 2005 Sienna just like yours as well for you to check out. Basically the bag slips between coils of the spring. view full answer...
Go To Results