If you're planning on installing the awning to the Yakima OffGrid # Y07138 then the SlimShady like part # Y96VR is what you want to go with as it uses clamps to secure to the crossbars on your vehicle. The Rhino-Rack Sunseeker gives you more options to add extensions to the awning but it installs via T-Slots on your roof rack so it can't be installed on the OffGrid directly.
As far as operation and ease of use goes these awnings are about the same so it really boils down to if you want... view full answer...
After consulting with Edge Performance, the Edge Insight CS2 # EP84030 is compatible for your 2000 Toyota Land Cruiser Prado as long as it is equipped with an OBDII diagnostic port. This product provides a full-color screen that displays up to 8 parameters of your vehicle at once, such as engine and transmission temperatures, speed, RPM, etc.
Please note while this item may help you with your fuel economy by tracking and improving certain driving habits, the Insight only displays data... view full answer...
I would be happy to help you. You will need a ball mount with 5-6 inches of rise to lift up the height of your ball mount so it is level with the coupler on your trailer.
If you have a 2" hitch you will want the Curt Ball Mount item # C45446. This ball mount has a 5" rise. You will want to use the 2" hitch ball item # A-90 with this ball mount.
If you have a 1-1/4" hitch you will want the Brophy Drawbar item # BM96. This ball mount has a 5-1/2" rise. You will want to use the 2" Hitch... view full answer...
The Surco Safari roof rack will fit to your vehicle and the Malone Roof Rack, part # MPG202. You have a couple of options with mounting the basket.
The Surco Safari rack I recommend for your vehicle is the 50 x 60 variant, part # SPS5060-1101. This includes an additional kit that will mount to your raised factory rails.
This kit includes four clamps that will mount the basket directly to your factory rails that run front to back without actually needing a roof rack. If you're planning... view full answer...
Since your 2019 Land Cruiser has the factory tow package you can use the Tekonsha Plug-In Wiring Adapter item # 3040-P to install a Tekonsha Brake Controller like item # 90195.
I saw you were looking at the Redarc Tow-Pro Liberty Brake Controller item # RED24FR. This is one of the best brake controllers on the market and one I highly recommend. You can install this using the Tekonsha Plug-In Wiring Adapter item # 3040-P however you will need an additional adapter. It is the Redarc Tow-Pro... view full answer...
The Firestone Coil-Rite Air Helper Springs, part # F4124, would be the correct part number for the rear of your 1996 Toyota Land Cruiser if it is a four wheel drive model. They do not offer any system for the front of your vehicle. I would not recommend to try to use the rear springs on the front of your vehicle. I am including a link to the installation instructions on the Firestone rear springs.
Firestone does offer lift spacers for vehicles that are lifted but they will not work with... view full answer...
Yes, the Thule Hullavator Pro Kayak Carrier part # TH898 will work with the Malone AirFlow2 Roof Rack either using the integrated channels or the wrap-around style clamps. However, the Hullavator requires that the crossbars extend at least 4" past the mounting feet so in order to obtain this I recommend you use the 65" long version part # MPG217. view full answer...
The Rhino-Rack Roof Rack Legs - Gutter Mount - 5-9/10" Tall - Qty 4 # RL150S13-2 are measured from the inside channel of the rain gutter to the underside of the crossbar according to my tech contact at Rhino-Rack. This may or may not give you enough clearance for your 1997 Toyota Land Cruiser factory roof rack clearance when you have some flex in the crossbars.
If you need taller towers, the rain gutter mounts you want are the Rhino-Rack Roof Rack Legs - 8-3/10" Tall - Qty 2 # RL210S2... view full answer...
Yes, you can use the Bully adjustable ladder rack, # CG-903, on your 1986 Toyota Land Cruiser. This vehicle, like you said, has side rain gutters which is what the rack attaches to. We also have a couple of regular roof racks that will also fit. I have included a link to them for you. view full answer...
The Rhino Rack Pioneer Platform part # RR45TB is a confirmed fit for your 2018 Toyota Land Cruiser but for the kit that includes all of the mounting hardware to attach to the fixed mounting points on your roof you'd instead want the part # RR89QX. view full answer...
You will want to measure the mounting bolt holes in your frame to determine if the Curt Trailer Hitch Receiver # C13089 will fit your 1996 Toyota Land Cruiser Prado TX JDM import. The Curt receiver is designed for the US spec Land Cruiser and has not been tested to fit any of the imports. The mounting holes closest to the end of the frame are 44-1/4" on center and measure 11-7/8" and 9-5/8" from the forward most holes(see image).
If your frame does not have these measurements you will... view full answer...
The Thule # TH859XT Canyon is indeed a fit for your Land Cruiser, but just to be sure I phoned my Thule representative who confirmed it for me.
Due the the height of the vehicle, many of our customers find that a tire mounted step like part # HE4040 makes accessing their cargo safer and more convenient.
You can see a product demonstration video by clicking the provided link. view full answer...
I may have another option available, but as all the hitches we carry are for US market vehicles, I cannot confirm the fitment on a Japanese market 96 Toyota Land Cruiser Prado, unfortunately. However, I did include a quick diagram of how the Curt # C12181 hitch will measure as it may still work for your vehicle.
If these measurements do not add up though, the only other thing I can recommend is something like the Draw-Tite Multi-Fit # 5350. This will fit a frame that is 24" to 46" wide... view full answer...
I do have an option for you but the Rhino-Rack Pioneer Platform Rack with Backbone Mounting System part # JA9328 only fits the factory mounting points on a Toyota 4Runner.
I recommend to use the Rhino-Rack Universal Pioneer Platform Rack for Crossbars part # RR42115BF if you want to fit the platform to your Thule Square Bars. This particular platform is 58" Long x 47" Wide which is the largest Rhino Rack platform option that fit's cross bars.
It sounds like your roof has raised rails... view full answer...
The Bestop Supertop Soft Top for Toyota Land Cruiser, part # B5146415 that you referenced, is indeed the correct top for your 1974 Toyota Land Cruiser FJ40. This complete top features 23-ounce black denim fabric, zip-out windows and it includes the bow support system. Doors are not included. The linked video illustrates.
You can use Zipper Cleaner and Lubricant # B1120600 to keep your zippers maintained. view full answer...
We have a front hitch for your 2018 Toyota Land Cruiser!
It's the Curt Front Mount Trailer Hitch, part # 31198. This 2" receiver hitch has a 500-lb vertical load capacity and a 9000-lb line pull capacity.
I've linked to a video installation of this hitch on a 2019 Sequoia for your reference. view full answer...
The square crossbars of the Malone Megasport trailer part # MPG535 are compatible with Thule accessories that were designed to fit square bars. view full answer...
Yes, the 55" x 49" Yakima LockNLoad Platform Rack for Crossbars # Y05044-39 will fit with the OEM crossbars on your 2021 Toyota Land Cruiser Heritage Edition just fine.
Attached is a review video for you to check out. view full answer...
The WeatherTech Cargo Liner - Cocoa # WT43356 is the correct option for your 2021 Toyota Land Cruiser when you have the 3rd row seating folded down, yes.
Please note that WeatherTech has a note in saying that their cargo mat isn't compatible with the Heritage Edition models. If that's what you have then I recommend checking out the etrailer Cargo Area Protector # e98877 as an alternative. This isn't a custom fit like the WeatherTech but it does provide a decent looking cover to help keep... view full answer...
Since you have the seats pulled from your 2002 Toyota Land Cruiser your best option to fill up as much of that space as possible is the AirBedz XUV Air Mattress # 341031. It's 66" long x 52" wide (43" at the tailgate) x 10" tall. This mattress sleeps 2 adults and has a built-in, battery-powered pump that inflates and deflates the mattress in minutes.
It also comes in blue # 341030 and camo # 341032. view full answer...
Go To Results