The Stabil-Step Stabilizer Jack # JSS-7 would just be placed under your step. You can use the holes you are looking at to mount this to a board for extra stability if you would like. Attached is a picture that a customer sent in where they mounted a board to the bottom for a greater surface area. view full answer...
What you can do is get the TireMinder i10 TPMS for RVs - LCD Monitor - Signal Booster - 4 External Tire Sensors # TM89FR and then also order 3 of the part # TM-2ALUM which comes with 2 of the aluminum tire sensors. This will give you the 6 aluminum plus 4 brass sensors you need for your application. view full answer...
The purple wire on the Replacement Control Module for Lippert Electric Coach Step # LC301702 is intended to connect to the positive power wire for the coach's porch light, so it comes on when the step is activated. Unfortunately neither I nor my contact at Lippert has any way to look up that wire color for your 2011 Tiffin Allegro.
If you have a circuit tester like # PTW2992 you can try testing the wires on the coach until you find the one that delivers power to the porch light.
In a... view full answer...
The green wire of the 4-way connector you sent in a picture of is the right turn/stop circuit, the yellow is left turn/stop, brown is running light, and white is ground. You could use the # 18252 to easily splice into the circuits as well to make an additional connector. view full answer...
You will have no problem using your Curt Echo Wireless Brake Controller item # C51180 when you lose cell signal. The wireless functions are controlled by Bluetooth. Bluetooth does not require a carrier signal or Wi-Fi to function. view full answer...