Yes, the Lippert Scissor Stabilizer Jacks # LC285326 is a set of two jacks with a 24 inch lift, maximum load capacity of 10,000 lbs (5,000 lbs per jack). The jacks have a collapsed height of 4-1/4 inches and extended height of 24 inches, providing a total of 24" of lift.
Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the... view full answer...
The Trailer Valet JXS Trailer Jack part # TV64FR comes with a footplate only. There isn't an exact fit wheel option for this jack but there are likely other options that will work. That said, these wheels reduce the lift/support capacity of the jack quite substantially.
The Removable, 6" Poly Caster Assembly part # JC-101 would be a compatible add-on wheel option limited to 1,200 lbs. view full answer...
The Dutton-Lainson Pull Pin, Easy Swivel Trailer Jack, part # DL22689, comes with the weld-on bracket and the retaining ring that connects the jack to the weld-on bracket and allows the jack to swivel. view full answer...
The Domar Stabilizer Jack, # TJ01RT, does not include the installation hardware. This jack can be welded or bolted to the trailer frame. Having the jack welded to the trailer frame by a qualified professional would be the best option, but bolting the jack to your trailer will work as well.
The bolt holes on this jack are 7/16 inches in diameter and 3 inches apart on center. I recommend using grade 5 or grade 8 bolts for the strongest possible connection. These can be found at most local... view full answer...
Lippert Components Power Stabilizer Trailer Jack Item # LC298707 is a single jack that spans the width of the trailer frame and will have a leg on the left and right sides. We actually have a few different electric stabilizers like this and I have included a link to them for you. They are all sold as individual units (except the Ground Control system which is completely different than the others). view full answer...
Yes, the Pro Series trailer jack # PS1400300303 includes the mounting hardware. I have included a picture of it for you and a link to a video review of the jack. view full answer...
Yes, the pin (bushing) that holds the handle to the jack is included in the Replacement Handle for Dutton-Lainson Sidewind Style Trailer Jack, part # DL22446. This handle will fit the Dutton-Lainson 6400A or 6700A series sidewind tongue jacks made after 1996. view full answer...
The Pro Series Trailer Jack, part # PS1400960376 does not come with an extension for a handle.
The handle, part # PS1400920383 is sold as a separate item.The # PS1400920383 handle will extend 13-1/2 inches when installed which should give you the needed room at the side of your trailer. view full answer...
The Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR comes with the auxiliary power wire for trailer 7-way power connection.
However, the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs # LC69VR comes with the power wire for the trailer battery connection only. The Auxiliary Power Cord for Lippert Power Stance Electric Trailer Jack # LC79VR is sold separately and is 6 feet long. view full answer...
Yes, the Xtreme Off-Road Ratcheting Trailer Jack w/ Dual Wheels # ARK54FR comes with the necessary hardware and mounting brackets. I've attached a review video below where Shane will go over the specifics of the jack and show you the included mounting hardware. view full answer...
Even though Lippert (LCI) does make different electric trailer jacks like parts # LC285318 and # LC643589, if you are wanting to use the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System # LC672136 then you need to replace your current jack with the electric jack that comes with this system. It has specific programming that allows it to communicate with the control unit for the leveling system and the other electrical jacks don't have this built-in so they wouldn't... view full answer...
The Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 does not come with the bolt-thru swivel bracket you will need to attach it to the trailer. For this, you can use the part # P9012-00. The plate that you are referring to will attach to the above bracket. As you mentioned, you will need to cut/grind the old bracket off and weld the new one on in order to use this jack.
I have attached a review video of the jack for you as well. view full answer...
The Domar trailer stabilizing jack you referenced, part # TJ01RT is sold individually. For a pair, you would need to order two of them. We also recommend the Handle Rod, part # SJ-100-HD to adjust the drop of the jack foot. view full answer...
The Replacement Top Cover for Lippert Components Electric Trailer Jack # LC285160 is only available with the switches on the front. It is the direct replacement cover for the 3,500 lb Lippert Electric Trailer Jack # LC285318.
The only similar top cover that does not have switches is the Replacement Cover for Stromberg Carlson Jack # JET-2500-02 which is the direct replacement for the 2,500 lb Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500. view full answer...
The Lippert Components High-Speed Power Stabilizer Jack # LC369774 is sold as a single stabilizer unit with two legs. Two will be needed to equip the front and rear of a trailer. The frame mounting brackets on this motorized jack require about 20-inches of space on the trailer frame. view full answer...
The Fulton F2 Swing-Up Trailer Jack # F1413040134 has the mounting hardware included with the jack.
This jack has a 1,600-lb weight capacity and has a wide 8-inch wheel. I have attached a link to a product review video you can check out. view full answer...
The Andersen # AM3620 includes 1 plastic drive on jack that can also be used as a leveler for single axle trailers, as a chock or when turned on its side it can be used as a base for a trailer jack. A rubber grip is included to prevent the chock from slipping.
I've provided a link to a product demonstration video. view full answer...
The # F500349 Replacement Bolt-On Mounting Kit for Fulton XP Series Jacks comes with a single bolt, nut and washer for the center attachment point. There are no U-bolts included in this kit.
If you are looking for the mounting hardware used with the Fulton XP Series Jack, the # F500286 Replacement Mounting Hardware for Fulton Jacks is what you need.
I have attached a review and installation video showing the mounting hardware in use to mount the jack to the trailer that you may reference. view full answer...
The Square Pipe Mount Swivel Jack w Footplate part # TJDP-7000S-B does indeed come with the pipe mount that gets welded to the trailer frame that the jack gets attached to and swivels on. view full answer...
Without a picture it would be pretty hard to say for certain. But I checked the landing gear sets we offer and the Lippert Manual Landing gear part # LC333966 has a top plate on the jacks that are held on with two bolts/screws. view full answer...