In regards to the Thule EasyFold XT 2 E-Bike Platform Rack part # TH903202, the lock codes are no longer printed on the face of the core as they once were. Therefore, you will need to get new lock cores if you don't have your key number. In order to do this, you will need to have the lock cores unlocked and so long as they are you can obtain the Thule One-Key System Lock Cylinders part # TH450400 and change them out with the included change key. If the cores are locked then you need to... view full answer...
We do have replacement hardware available for the Curt # C13409. What you need is the Replacement Hardware Kit for Trailer Hitches # RHK. All you need to do is enter the C13409 item number in the field labeled "Hitch Item Number" and add to cart. view full answer...
The closest alternative we offer for the # C18115-FAR replacement fairing would be the Rhino Rack # RRRF3 which is 44 inches long as opposed to the Curt # C18115-FAR which is 1 inch longer. The problem you'll run into by attempting to use a different fairing is that the mounting holes won't line up.
I'd recommend going with the fairing that was designed for use with your basket, the # C18115-FAR. view full answer...
I'm not seeing a part number on the sticker shown in the photo, but if the hitch is part # C13409 it will fit a 2019-2021 Subaru Forester. The hitch part number might be located elsewhere on the hitch, and would be indicated by a 5 digit number beginning with the number 1.
If that's what you have, you can obtain replacement hardware using our # RHK kit. Click the provided link, and on the product page type 'C13409' into the provided field, then choose 'Curt' from the drop down menu.
If... view full answer...
Yes there is!
The Yakima DoubleDown Ace 4 Bike Carrier Y02451 fits both 1-1/4" and 2" hitches but if you do not have the adapter sleeve you need Replacement Adapter Sleeve # Y8890342. This will allow your DoubleDown Ace to be used with a 2" hitch. view full answer...
According to my contact at Dometic, that thermostat is no longer available as a replacement part. Unfortunately, this means the only solution is to replace the entire fan.
I recommend the Fan-Tastic Vent Roof Vent # FV803350. This has 3 manual speeds, a rain sensor, powered arm, and a thermostat. If you would like to have a remote we also have the # FV807350. This has the same features as the other fan but adds the digital remote as well as 13 speeds. view full answer...
We don't have a kit for the RIde-On Adapter TH532 without the crossbars, but we do carry all of the parts individually.
4 of the # 915-0625-54
4 of the # 853-2154
4 of the # 853-2156
4 of the # 853-5267
4 of the # 753-2854
4 of the # 936060054
4 of the # 853-5269
8 of the # 853-5293
1 of the # 853-5270-02
1 of the # 853-3593 view full answer...
We do have what you need, but the Replacement Strap for Thule Caravan Quest Roof Mounted Cargo Bag # 853-5907 is not the correct replacement strap for your Thule Outbound Rooftop Cargo Bag # TH868.
I contacted the manufacturer and the correct replacement strap for your Thule Outbound cargo bag is the Replacement Strap for Thule Tahoe Roof Mounted Cargo Bag # 8535494. view full answer...
Replacement spacer block # RP3022 is the exact block used in many different trailer hitch installations. Its grade isn't ever specified but hitch hardware is always at least grade 5 and in some cases there is a grade 8 used. It is not stainless steel.
The RP3022 is just the block with no other parts included. It looks like there are 2 bolt sizes used to install the Draw-Tite hitches on the 2010 Subaru Forester, # 80103-1 for 7/16 inch bolts and # 80101-1 for 1/2 inch bolts. You would need... view full answer...
The Curt hitch part # C47HR that fits your 2024 Subaru Forester would not void the warranty. With aftermarket products like this hitch you are protected by the Magnuson Moss Act which basically says that Subaru would have to prove the hitch voided the warranty and couldn't claim the hitch by itself automatically voids it. view full answer...
Good news! I can help you get the correct Draw-Tite hardware for your 2017 Subaru Forester trailer hitch.
The Draw-Tite # 75876 is confirmed to fit your vehicle. This will be the number for the "Hitch Item Number" you will place in the box on the Replacement Hardware Kit # RHK product page. Then simply pick the Draw-Tite manufacture from the drop down box and then hit the add to cart button. This will get you all the correct original hardware so that you can install your hitch to your... view full answer...
Yes, we do sell replacement hardware for all of the hitches we offer with the part # RHK. You'd just need to enter the part number for the hitch that you have and we'll ship you out the correct replacement hardware. view full answer...
The replacement inner tube for the Yakima Rack and Roll Trailer # Y08106 or # Y08107 you are looking for is part # Y8880283.
I have linked it to this page for your purchasing convenience. view full answer...
If you have the Yakima Black Jetstream crossbars on your 2017 Forester, the longer crossbars that will work with your roof rack are part # Y00426 for 60 inch, and part # Y00427 for 70 inch.
If you have the Yakima CoreBar roof rack, replacement 60 inch crossbars are part # Y00422 and 70 inch are part # Y00423.
If your roof rack has round crossbars you can use part # Y8810025 for 66 inch and part # Y00411 for 78 inch.
You will need to check with your local authorities to see if there... view full answer...
To order replacement hardware for a trailer hitch the part number you need is # RHK. On the product page of # RHK you'll select Draw Tite from the drop down menu and then enter part number 75876 and we'll ship you out the correct hardware. view full answer...
For a 65 inch crossbar roof rack confirmed as a fit for your 2016 Subaru Forester that will work great with the Thule Hullavator # TH898 we have the Malone Roof Rack part # MPG203 which clamps easily to the raised side rails on the vehicle roof. This will give you the additional overhang you need to carry the Hullavator. view full answer...
I called my contact at Redline, and they told me that they use the same lock and key for their flush mount door latches. So you could order 4 of part # L1883 and they would all be keyed alike. If you need a larger latch, 4 of part # L3980 would also be keyed alike. Both of these flush mount locking door latches use the same key number. view full answer...
We do! To get replacement hardware you need the part # RHK, which is a complete hardware kit.
It looks like you were looking at the Curt Trailer Hitch # C13144 for a 2016 Subaru Forester so if that's the case you just need to input the hitch number, 13144, into the box on the RHK hardware page and we'll send everything out to you!
If you're only missing a few bolts then it'll honestly be more cost-effective to pick up some 1/2"-13 x 1-3/4" bolts from your local home improvement or hardware... view full answer...
Yes, we do have the Replacement Key HF321 # GL69FR. This key works with FIC entry and baggage doors on rv's and is compatible with the HF321, EF321 and CF321 locks. view full answer...
The part you linked is the Replacement Lock Core and Key for SportRack Explorer Cargo Box # SR03807 which is the replacement lock core and key for the Thule SideKick and the SportRack Explorer cargo box.
If this is what you're looking for, then you're all set. If you're looking for something else feel free to provide a bit more context to what you're looking for and I'd be happy to help. view full answer...
Go To Results