To install a Thule Hullaport # TH834 on aero shaped crossbars like what your 2019 Toyota RAV4 has you'd want the adapter part # THXADAPT11. view full answer...
Yes, Gen-Y does strongly recommend using a stabilizer kit # 325-GH-0100 with the Gen-Y Adjustable 2-Ball Mount # 325-GH-316 if you end up using a drop setting of more than 12 inches. This ball mount setup in the lowest setting is 12-1/2 inches of drop which is why you'd need it if you were to use the lowest setting. This prevents any wobble or sway from starting. view full answer...
According to Ford's Towing Guide, the 2016 Ford F-350 Super Duty with the 6.7 Diesel engine, Crew Cab, 4x4 has a maximum 5th wheel/Gooseneck towing capacity of 15,700 lbs for single rear wheel trucks. For dual rear wheel drive trucks, it's between 23,500 and 26,500 depending on the axle ratio.
If you're in the market for a 5th wheel hitch, I recommend the B&W Companion # BWRVK3400-5W for a short bed, or # BWRVK3500-5W if you have a long bed, along with the custom installation kit # BWGNRK1111-5W.... view full answer...
According to the manufacturer, the Replacement Inner Tube with Drop Leg, Foot, and Pull Pin for Curt Heavy Duty Direct Weld Square Jack # C28957 measures 28 inches tall and 3-1/2 inches wide.
This is a direct replacement for the Curt square jack part 28512. view full answer...
The bore diameter or hole size in the center of the wheel for the Complete Agricultural Hub Assembly for Spindle # AS3000F part # AH30660FCOMP is 3". view full answer...
I went out the warehouse and measured the 1,000 pound SumoSprings your 2016 Toyota Tacoma and they're right under 5 inches at about 4-15/16 inches.
These are custom fit for your Tacoma as long as it has the factory suspension. If you've modified it at all let me know and see if we have another option that'll work for you. view full answer...
I'm not quite sure what you mean by puck to end of frame, but I can confirm that the B&W Companion OEM 5th Wheel Trailer Hitch with Slider for Ford Towing Prep Package # BWRVK3370 is a fit for your Ford F-350 Super Duty.
Overall it measures 36 inches wide and 32.375 inches long, with the puck attachments being separated by 30 inches in width and 13 inches in depth.
I have added a link to a video review and install for you to check out as well of the B&W Companion OEM 5th Wheel Trailer... view full answer...
The bolt hole dimensions of the Buyer's Products lunette ring, part # 337BDB125015, is 4-1/2 inches both vertically and horizontally. I've linked a video showing them being measured. Also, the holes themselves are 5/8 inch in diameter.
We carry a couple nose plates that match up to the lunette ring; part # 337TNP716625750 is a 3/4 inch thick plate and part # 337TNP716750100 is 1 inch thick. view full answer...
The measurement I believe you're looking for on the BoatBuckle G2 ratchet straps, part # IMF08893, is about 4-1/2 inches. I've attached a picture that shows the dimension. If this isn't the correct measurement let me know. view full answer...
The best way to find out what kind of clearance is needed is to measure. From the research I did, your 2017 Toyota 4Runner is about 72" tall with factory tires.
The Rhino-Rack Roof Mounted Steel Cargo Basket # RMCB you referenced is 5 1/2" overall in height. So that should put your 4Runner about 77-78" which is right under the 81" opening. But I still recommend that you measure your 4Runner and garage.
Rhino Rack has a net and strap kit made for this basket # RLN1-RTD4 to keep all your... view full answer...
It depends on where the Boss Snow Plow is attached to the frame on your 2015 Ford F-350 super duty. Most snow plows and front mount hitches like part # 65049 have identical mounting locations so they are not compatible at the same time. However, I have attached a snip from the installation instructions for your reference. If you look at the attached video if your snow plow shares mounting locations of the hitch, they will not fit together on the truck. I do not know of anyone that has done... view full answer...
The Air Lift 1000 Air Helper Springs, part # AL60769, have a total capacity (put together) of 1000 pounds. They are not meant to be a suspension replacement, but more of an enhancement for your existing coil springs.
Keep in mind that these do not increase your vehicle's weight capacity. They are more for keeping your vehicle level and diminishing sway. I've linked to a video demonstration of this. view full answer...
The listed 35-1/16" width for the Furrion RV Refrigerator # FCR14ACBQASS is indeed taken from the outside of the flange on one side to the outside of the flange on the other side. This is the unit's overall width. It has an overall height, including the flange, of 74-1/4 inches. view full answer...
The Dexstar Conventional Steel Wheel # AM20514 that you referenced features a 0.453" diameter valve stem hole.
If you need a valve stem the Americana Rubber # AM20903 will work perfectly for up to 65 psi or the Americana Metal # AM20906 can be used for higher air pressures of up to 200 psi. I have attached a few short video reviews on these products that you can check out as well. view full answer...