The part for your 2000 Saturn SC2 is indeed EZ bracket part # 52181-1. We do carry them and can ship them to immediately. Attached are the installation details you will need. view full answer...
The 2001 Saturn SL1 uses turn signals that are separate from the brake lights. There are to ways you can wire the vehicle. First, you can wire it so that when connected to the motor home, the turn signals and brake lights will be combined. Or, you can wire it to retain the separate functions. The second method requires a few more parts.
For either method, you will start with Roadmaster Universal Hy-Power Diode Wiring Kit, # RM-154. A wiring diagram is included after the description on... view full answer...
I recommend using a direct receiver type of tow bar over a ball mount tow bar when flat towing. You can experiene a lot of rattling with a ball mount style tow bar # RM-501 and would have to have the ball mount tow bar exactly level. With a receiver hitch style tow bar you'll have three inches of give either higher or lower from level, as you can see in the attached picture. With the receiver style tow bars, like the # RM-522 I recommended before for your 2002 Saturn, you can install the... view full answer...
The best recommendation I can make for you would be to get a load range E tire like the Loadstar K399 Bias Trailer Tire # AM1HP56. This will fit your rim and will have the highest load rating we offer in that size.
We do not have have taller tire that would fit your rim, but the # AM1HP56 should work very well for you. I attached a couple FAQ articles you might find informative also. view full answer...
The Reese Strait-Line Weight Distribution with Sway Control # RP66084 would fit on your trailer frame as long as it is less than 2-1/2 inches wide.
However, because of the height of the trailer frame, I recommend using the Reese Chain Hangers for Reese Weight Distribution Systems # RP58305 in place of the hangers that come with the system. The hangers # RP58305 will bolt onto the trailer frame and can be placed at an appropriate height for the load bar arms. These hangers will also ensure... view full answer...
For what you are looking for the Handle Assembly for Polar Cam-Action Latch Kits # PLR158-100-A is the best option. It is right the length you need as well as the correct width at 1-1/14 inch which means it will fit into the latch properly. view full answer...
A much easier solution that would give you a permanent flat tow lighting solution for your 2002 Saturn S Series would be to install a bulb and socket kit like part # RM-155. Basically with this kit you would install an additional bulb in the current taillight housing of your vehicle which the tow bar wiring will control. I attached an install video for this product for you to check out.
Or if you really wanted to make a taillight kit with LED light bars you would want the part # STL79RB... view full answer...
The Roadmaster Falcon 2 Tow Bar # RM-520 normally comes with the quick-disconnects needed to match up with the Crossbar-Style Base Plate Kit # 154-2 that you're looking at for your 2002 Saturn SL2. If you don't have this piece then you can replace it with the Quick Disconnect Crossbar Assembly # 910021-00 for your tow bar and the base plate kit to be compatible with each other.
For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring,... view full answer...
First, while you might not be able to find a digital copy of the manual you can find paper copies out there. One thing you might try is to find someone near you selling the same car and go look at their manual for the flat towing procedures.
From what I could find you can flat tow your 2001 Saturn SC1. It is not recommended to tow it over 65 miles per hour. Additional information is available once you locate an owner's manual.
To flat tow the vehicle there are 5 main parts you will need:... view full answer...
Yes, there is replacement hardware available for your Draw-Tite Class I 1-1/4 Inch Hitch, part # 24620. It is the Replacement Hardware Kit, part # RHK. When you get to that product page there will be three boxes in the middle of the page. One is for the hitch item number, in your case it would be 24620. The next box is for the manufacturer, in your case it would be Draw-Tite. The last box is the quantity. view full answer...
For a basic but effective RV AC unit the Advent Air part # ADV44FR would be a great option that runs off 110 AC power like you have present. This comes with a roof distribution box as well as a wall thermostat to control it so it would be all that you'd need. view full answer...
We do offer a Roadmaster XL base plate kit for your 2000 Saturn SL, but the Roadmaster XL Base Plate Kit, # 162-3, will not fit your vehicle. This kit is designed to fit 1996 to 1999 model years only. I verified with my contact at Roadmaster that there were a few slight frame and fascia changes from the 1999 year model SL to the 2000 year model SL which is why they had to manufacture a different XL base plate kit for the later model SLs.
We cannot recommend modifying a base plate kit to... view full answer...
The custom-fit base plates for your 2002 Saturn SC1 3-door coupe is part number 52181-1. I have included a link below to that product. view full answer...
If the 162-1 Roadmaster base plate kit you are currently using is an XL kit, which I believe it is, then all you will need to set up your 2001 Oldsmobile Alero is a Roadmaster XL Base Plate Kit, part number 194-3.
If you need wiring for the Alero you can choose either, part number 38955, tail light isolating kit which will wire to the vehicles tail lights, and you will need a converter # 118158 since your Alero has separate turn and brake lights or you can use the, part number RM-155,... view full answer...
We do have the complete hardware kit for the Draw-Tite Trailer Hitch Receiver # 24620 that fits a Saturn S Series.
You'll use part # RHK and then enter the hitch's model number and select the manufacturer from the drop down. This will order you the exact hardware kit for your hitch. view full answer...
The Roadmaster Stowmaster tow bar # RM-501 and other generations of the Stowmaster will fit the 1998 Saturn Wagon as long as it has the proper baseplates, # 52181-1.
[If you wanted to be able to easily switch from one vehicle to the other I recommend adding some vehicle side quick disconnects, # RM-222. view full answer...
You will need to get a completely new tow bar if you're wanting to install a custom base plate kit on your 2002 Saturn SC2. The Curt Tow Bar # C19745 that you have is designed to be connected to your vehicle using the universal brackets that come with the tow bar and the tow bar isn't compatible with anything else.
I recommend going with the Roadmaster EZ Base Plate Kit # 52181-1 and pairing it with the Roadmaster StowMaster Tow Bar # RM-501 which connects to the motorhome using a coupler... view full answer...
To use the Roadmaster base plate to Blue Ox/Demco tow bar adapter, # RM-033, you will need to install Roadmaster base plates like # 162-2. Then, to make the arms of the base plates removable, you will also need quick disconnects # RM-201.
If you have a Blue Ox Adventurer, Acclaim, Ambassador, Aventa, Aladdin, Alpha or Allure tow bar, you could just use Blue Ox base plates, # BX3310, and not worry about an adapter.
With the base plates and tow bar out of the way you will also need safety... view full answer...
Removable arm-type base plate drawbars for your 1996 Saturn SL2, such as those in the Roadmaster # 52181-1 and the Blue Ox # BX3310 that are shown on the link at right, should not be too difficult to remove. I am concerned that the difficulty you are having removing the one drawbar could be a result of an impact or other damage.
Has this system been in use for some time or is it new?
If it is a new system then I urge you to take it to the place of purchase for inspection.
If its been... view full answer...
Both Blue Ox and Roadmaster make base plates for your vehicle that feature removable base plates. On your particular vehicle, the Blue Ox # BX3310 would be easier to install and the draw bars are easier to remove.
The Blue Ox Alpha tow bar, part # BX7380 would be a good choice for a tow bar, and it includes the safety cables. The towbar features automatically locking arms that allow you to attach the tow bar to the base plates even when the vehicle isn't perfectly lined up behind the motorhome.
For... view full answer...
Go To Results