Expert Answers about Palomino

• Replacement 3,500lb Dexter Axle For Diamond C 3RBT Utility Trailer
• Based on the information you gave me, the closest axle we have is the 3,500lb EZ-Lube Dexter axles which measure 74" from spring center to spring center and 89" from hub face to hub face. While you were looking for 88" hub face to face, this 89" shouldn't cause any issue and is likely the correct size axle that you were needing since 89" is extremely common. Either way, the 1" difference will not be a problem. For a complete axle and electric brake setup with 5 on 4-1/2 bolt pattern you...
  view full answer...


• Can Typical Trailer Ball Mount Be Used With Stealth Hitch 391HYUNPALIS19 on 2021 Hyundai Palisade
• The receiver included on the # 391HYUNPALIS19 is meant for hitch mounted accessories only and not for towing. For towing, you'd want to use the # 391CONVPT5L upgrade which provides the approved ball mount. Stealth doesn't recommend using a standard ball mount in the # 391HYUNPALIS19 version
  view full answer...


• Replacement Propane Supply Hose From Regulator to RV Propane Supply Line
• It sounds like you're looking for a 3 foot long supply hose; typically the outlet end of a regulator will almost certainly be a 3/8" female NPT and from the picture you sent it looks like you've got a female flare connector on the other end that goes to the metal RV piping. Additionally, since you've said that the piping side is larger it sounds like you're looking for the # 37207-31445 which has a 1/2" Female flare connector on one end and a 3/8" male NPT on the other.
  view full answer...


• Recommended Hitches for a 2011 Ford Fusion or 2015 Honda Civic Sedan
• We do have solutions for both of these vehicles that are going to be custom fit and won't require any drilling. For your 2011 Ford Fusion I recommend using the Curt # C11390 and for your 2015 Honda Civic you'll want to use the Curt # C11391; Curt hitches generally have a much thicker powder coating on them, so they're going to stand up to the rigors of the road a little bit better and won't be as likely to get nicks in the coating that might lead to corrosion issues. These are both custom...
  view full answer...


• Which Power Inverter For Running Laster Printer In Car
• The power consumption of a laser printer can vary considerably from unit to unit, but the documentation that came with your printer should list the specific power requirements. From my research, I found that the typical home-use laser printer will use between 300 and 550 watts when printing. Given that, the Wagen # WC3720 1000 watt power inverter would be the perfect choice, as it's never a bad idea to have a little more capacity than you actually need. I've linked you to a product demonstration...
  view full answer...


• Trailer Hitch for 2018 Dodge Durango that Doesnt Require Fascia Removal During Installation
• We do offer hitch fits for the 2018 Dodge Durango that don't require removing the rear fascia in order to install it. The Draw-Tite Class III hitch, part # 75713 would be one of those fits, but I personally prefer the Curt # C13182 because I believe Curt does a little nicer job with their powder coating process. If your spare tire is a full size tire on a wheel larger than 18 inches, the spare won't be able to be stored under the vehicle once the hitch is installed. R/T models with dual...
  view full answer...


• Recommended Towing Mirrors for 2020 Jeep Gladiator
• I have a solution for you, but the CIPA # CM11551 are designed to fit on a Ford truck. I'll also add that there is not a custom slip on towing mirror for the 2020 Jeep Gladiator. Instead of the # CM11551, you can use the CIPA Universal Towing Mirrors # 7070-2 which are a great towing mirror for your 2020 Jeep Gladiator that attach with ratcheting rubber straps to provide a secure connection to your Jeep's mirrors. Those rubber straps will do a great job of limiting vibration that other...
  view full answer...


• What Type of Hitch Fits in a Demco 6206 5th Wheel Adapter
• The Demco # DM6206 adapter allows you to mount a 5th wheel hitch that fits in industry standard rails on a Chevy or GMC truck that has an OEM prep package. As long as your GMC hitch isn't designed to fit in the factory pucks and is designed to fit in industry standard 5th wheel rails, you would be able to use the # DM6206 to drop into your factory pucks. This adapter would provide you with industry standard base rails to mount a 5th wheel hitch. I've linked a brief video on this part for...
  view full answer...


• Adding Multiplexer to RVS-619N-S System And How To Wire Multiple Cameras Constantly On
• I have the perfect solution for you! To add a multiplexer to your Rear View Safety # RVS-619N-S system you can use the Rear View Safety Multiplexer Box # RVS-501N , which is the part that is normally included in the upgraded # RVS-770619N-S system. During installation you can wire the system power into the battery to keep the cameras constantly on, so that you get a camera feed while moving forward. However, which camera is turned on is dictated by passive triggers that change depending...
  view full answer...


• How to Install Furrion FCE48TASL Side Cameras On RV with Diagram
• To add two side cameras to your Furrion Vision S Wireless RV Backup Camera System with 5" Screen # FOS05TASF, you can use the Marker Light RV Side Cameras # FCE48TASL. I can understand your concern with the trailer having all LED lights, but it will not be an issue on an RV like yours which will provide more than enough power. So, the # FCE48TASL install the same as any 2-wire (power and ground) side marker light, with the addition of the extra red wire to power the camera. I have attached...
  view full answer...


• Can I Flat Tow a 2018 Ford Edge Behind a 2021 Tiffin Wayfarer 25TW
• It looks like a Tiffin Wayfarer 25TW has a towing capacity of 5000-lbs and the curb weight of a 2018 Ford Edge tops out at 4400-lbs roughly, so you should be able to flat tow that vehicle behind it without any issues. You'll want to consult with the dealer or Tiffin for confirmation on this. When it comes to your 2018 Ford Edge, there are some variations of the Edge that are not flat-towable; if you have the 2.0L EcoBoost with an automatic transmission (6F35) then you need to tow it using...
  view full answer...


• Scamp 19 trailer triler hitch rails installin 2001 dodGE QUAD CAB
• We have just what you're looking for if you've got a 5th wheel hitch that fits in the industry standard base rails. For your 2001 Dodge Dakota Quad Cab you'll want to use the Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt # RP30035, which will give you the base rails you need to install a 5th wheel hitch and tow a 5th wheel trailer. I've linked a review video of this kit for you to have a look at.
  view full answer...


• Recommended Spare Tire Carrier for 8 Lug Wheel on Trailer Tongue
• If your spare tire is under 45-lbs, then you can use the Fulton Hi-Mount Spare Tire Carrier # FHDSTC0101 but a better solution if you've got a trailer frame that is 4" x 4" would be the Ultra-Fab Folding Spare Tire Carrier for Trailers and RVs - Bumper Mount # UF15-954730. This carrier has a capacity of 60-lbs so it's going to be able to handle a little bit more beefy of a wheel; while it's normally meant for a bumper, it can be used on a trailer frame all the same. I've linked some review...
  view full answer...


• Mounting Hardware for a 2012 Ford Escape Receiver Hitch
• We do offer a Replacement Hardware Kit # RHK. Its a great option for Curt, Da'Lan, Draw-Tite, etrailer, Hidden Hitch or Reese trailer hitch receivers. Please specify your manufacturer and hitch number when placing the order.
  view full answer...


• Wiring Harness Adapter to connect Reese Brake Controller to 2015 Ford F-150 Factory Tow Wiring
• The wiring harness that you will need to get your Reese brake controller connected to your 2015 Ford F-150 is the Tekonsha Plug-In Wiring Adapter # 22292. This will connect to the factory connector under the dash on the drivers side.
  view full answer...


• Recommended Weight Distribution System for Coachmen Catalina Expedition 192FQS
• From what I was able to determine with some research, it looks like the 2021 Coachmen Catalina Expedition 192FQS has a 5040-lbs GVWR and 540-lbs tongue weight; you'll want to choose a weight distribution system based off of the tongue weight of your trailer when it's fully loaded, which should be at maximum 15% of your GVWR. I recommend using the Strait-Line Weight Distribution System w Sway Control - Round Bar - 10,000 lbs GTW, 800 lbs TW # RP66087 which is the perfect fit for your trailer's...
  view full answer...


• Recommended Winch and Mounting Plate for 2017 Honda Rancher 420FM1
• I do believe that the 420 FM1 series Honda ATV you're referring to is part of the Honda Rancher family of ATVs, so you can use the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15181 paired with something like the Superwinch Terra Series ATV Winch - Synthetic Rope - Hawse Fairlead - 3,500 lbs # SW1135230. This winch has a synthetic rope like you're seeking and is ideal for ATVs and will work with that Bulldog mounting plate. I've linked a review video of the winch mount for you to...
  view full answer...


• Recommended Solution to Tow 5th Wheel Trailer with Curt Gooseneck Hitch
• The best solution is going to be using a simple gooseneck to 5th wheel adapter for your 5th wheel trailer; I recommend using the Convert-a-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter - 12" to 16" Tall - 20,000 lbs # CAB-C5G. This adapter has poly cushions that help absorb road shock and smooth out your towing experience, and this will be compatible with your Curt gooseneck hitch. I've linked a review video of this adapter for you to check out.
  view full answer...


• Replacement Wheel Stud with 1/2 x 20 and .62 Spline Diameter
• It sounds like the Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1 # 7-122 is what you're looking for. This is a 1/2" x 20, 2" long stud with a .61 spline diameter-which is the closest we've got to your .62; this could just be down to a slight difference in the measurements taken and I believe this should work for you.
  view full answer...


• Recommended 5th Wheel Hitch for 2015 Ram 1500 Short Bed
• I have a solution for you, but the Reese Select you were looking at is not going to work since you've got a 6-1/2 foot long bed and you will need a sliding hitch typically for this application. I recommend using the Demco Hijacker Autoslide # DM8550034, which will require a rail kit like the Demco Premier Above Bed Rail Kit # DM8552030-71. The Hijacker Autoslide is a great choice because it automatically engages the slider, which means that you won't need to get out of the truck each time...
  view full answer...