You can select replacement 4-on-4 hubs for your trailer by determining the bearings used in your original hubs. The linked photo shows the typical appearance of bearing part numbers. You can pull one of your hubs, remove its bearings and note those inner and outer bearing part numbers.
The 4-on-4 hubs we offer include both idler hubs and hub/drum assemblies for brakes. You can see all on the linked page. Click on the type you need.
Note that all of these hubs use either of two inner and... view full answer...
It sounds like you're either needing to replace the axle on your trailer or you need a lift kit for them.
To replace the axle the only torsion replacement we have comes from Timbren with their Axle-Less systems. These come in a variety of options but for standard configurations we have the following:
- 5-Bolt Idler Hub # A35RS545
- 5-Bolt Brake Assembly Kit # A35RS545E
Attached is a review video of the Timbren kit as well as a link to our selection for you to filter through. If you... view full answer...
According to my Wesbar representative, the 7292 light is no longer available, although I did find some with red lenses online by doing a Google search. I looked though our selection of amber clearance/marker lights, and was unable to find anything with a matching bolt hole pattern. Unless you can find one online, you'll probably find your best bet will be to replace the lamps. I've linked to our selection of amber marker/clearance lamps. I'd recommend going with LED lamps if possible. They'll... view full answer...
I have a suggestion for you as the rubber style plug is obsolete when Ram switched to the new Cover # EJ-3520-BCV style which uses the Cap # EJ-3520-BCP you found. With your cover having the odd egg shape you can enlarge the hole to a round hole which you can fit with a rubber firewall plug that you can source from a local auto parts store. Do be sure to verify sizes available before cutting a hole in your current cover. view full answer...
Trailer running lights not working with certain Nissan vehicles is a common problem with an easy fix. There is a relay for the trailer running light circuit that is located in the fuse box (in the cab). If that relay is missing or no longer functions then it can be replaced with one of the blue relays from the Curt Relay Kit # C57000.
The relay of the running light circuit on your 2013 Nissan Frontier is in the relay harness behind the passenger floorboard kick panel.
If you check out... view full answer...
Appreciate that info, and the correct replacement tarp for your 2005 Nissan Frontier with a 6 foot bed and the TruXedo TruXport Soft, Roll-Up Tonneau Cover # TX284101 is the following part number:
- Replacement Tarp for TruXedo TruXport Soft, Roll-up Tonneau Cover # TX2841-CVR view full answer...
The single leaf spring you referenced, part # e46SR, would work fine as a replacement for the 5-leaf springs you currently have. You are correct in stating that corrosion would be less of an issue with this particular spring.
Make sure to replace the leaf springs in pairs by axle. view full answer...
The Tow Ready wiring harness you referenced, Replacement OEM Tow Package Wiring Harness with 4-Flat # 118263, is a correct fit for the 2007 Nissan Xterra that came with the factory tow package.
However, if your OEM vehicle connector is missing you can obtain one from your local dealership or you can go an easier route and simply wire in a 4-pole vehicle connector like # 18002. You can use butt connectors like # 05731-5 to connect the 4 wires, matching them color for color. Once you make... view full answer...
The Curt MV Weight Distribution System w/ Friction Sway Control # C17062 sounds like the lift bracket hook may be needing replaced. That hook should easily hold onto the chain link to lift the bar. For this replacement I recommend the Replacement Lift Bracket for Curt Weight Distribution Systems # C17008. view full answer...
It sounds like you're talking about the Velcro strips that keep the cover secure on the sides on your 2010 Nissan Frontier. You can use the Replacement TruXedo TruXport Shur-Bond Hook-And-Loop Fastener Strips for 6-1/2' Beds # TX1117876 and cut it down to size. If you needed the loop side for the tarp then you can use two of the # TX1705183.
If you meant the corner weather seals we have the Replacement Corner Weather Seal for TruXedo TruXport Covers # TX1703568. We also have the rear... view full answer...
You said you have a 4 on 4 wheel bolt pattern on the wheels you have on your trailer with the 20.5X8-10 tires. The overall diameter of that tire is 20.5 inches.
The Kenda Tire/Wheel Combo, part # AM30790 has a 5.30 - 12 tire on a 12 inch wheel and measures 21.9 inches diameter, and has a 4 on 4 bolt pattern as well. .
If you have sufficient clearance under the trailer when adding the 12 inch wheels and tires, you will be fine.
I have attached a helpful article about measuring the... view full answer...
I was not able to find any purchase history for you for an actual tow bar but I did find that you ordered, among other things, a trailer hitch receiver # HH87663 which is a Class III hitch from Hidden Hitch. I suspect you were referring to the hitch when you used the term 'tow bar'. Just FYI - an actual tow bar is a device used to let one vehicle pull another, such as part # BX7380.
All hitches that we sell include the specific hardware kit required for safe installation. I am sorry that... view full answer...
We do indeed offer replacement shanks for the Convert-A-Ball interchangeable trailer ball system.
For a shank with a 3/4 inch diameter shaft, the # 104B with a 5000 lb capacity or the # 101B with a 3500 lb capacity is available.
Neither shank is compatible with a 2-5/16 inch ball, as the weight capacity of either shaft is insufficient for a trailer that would use a 2-5/16 inch ball. view full answer...
For your 2019 Nissan Murano we only have hitches like the etrailer part # e98907 which have the crosstube underneath the vehicle. Based on the muffler location on your vehicle there just isn't a way to fit a hitch that only has the opening visible below it. view full answer...
There used to be a replacement of just the 7-Way and wiring for the older Pathfinder wiring harnesses but it looks like the connectors needed to be changed for the 2013-2020 Pathfinder so the only wiring harness available comes with the Kit # 118273.
It seems pointless to get all of that extra stuff but since relays can need to be replaced from time to time it isn't a terrible thing to have those extra parts.
Attached is an installation video for you to check out if you need a refresher... view full answer...
Both the Curt # C11348 and Draw-Tite # 24798 Trailer Hitch Receivers that fit your 2011 Nissan Versa use 1/2"-13 mounting bolts.
A Curt Fish Wire Bolt Leader # C58400 will allow you to be able to install the new hardware you get in the Replacement Hardware Kit # RHK for your Versa. view full answer...
The replacement hardware you need for trailer hitch # 60945 or any trailer hitch we carry for any vehicle is # RHK. This is a replacement for all of the hardware though. Still, it is good to have some spares. What you do is enter the hitch number and manufacturer on the RHK and the appropriate kit will be sent.
Please note that if you have a 2005 Nissan Maxima this trailer hitch will not fit. It is designed for the 1995 to 2003 Maxima which was the generation prior to the 2005 generation.... view full answer...
I have a solution for you, but we do not have the individual hardware kits for each hitch built out within the site- there are just too many to list. In order to get the correct Replacement Hardware Kit # RHK , you'll simply go to the linked page for the RHK and select the manufacturer of the hitch, in this case it is a Curt. After that, you'll put in the part number of the Curt Hitch # 13241 where it says "Hitch Item Number". After you've done that, you'll just add the item to your cart... view full answer...
Tekonsha does not offer replacement circuit boards or converter boxes for their kits like the # 118547 so your best option is to go with an all new kit as it's only way to order the box. view full answer...
Go To Results