The 2 inches of overhang at the rear of the camper when you use MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat part # MA00-05100K will be fine when you are pulling the camper. You would just want to keep the the extra 2 inches of overhang in mind when you park or store the camper in an enclosed space so you don't end up bumping it into something. view full answer...
The Thule Pulse Medium Rooftop Cargo Box # TH614 that you referenced should fit perfectly on your 2018 Nissan Rogue Sport without any interference with that prominent rear antenna. We actually mounted this exact box on an older 2014 model Rogue Sport, which is the same generation as your 2018 model, and as you can see by the below image there was plenty of space between the box and the antenna.
If you want to be extra sure you can also take a measurement from the center of the front crossbar... view full answer...
With the Whispbar line being discontinued in North America in the Fall of 2016, I cannot say the if Yakima Fit Kit # Y00158 will be compatible. However, I was able to find one old listing that did mention the lengths of the bars that came with your Whispbar S28W Flush Bar Pack (1100mm and 1150mm), and they will be a bit longer than the Yakima FlushBar Crossbars # Y00456-0457 (1047mm and 997mm) that are designed for your 2022 Nissan Rogue Sport.
I know it's a bummer to do this, especially... view full answer...
For your 2020 Nissan Rogue Sport you are going to want the Curt Trailer Hitch Receiver item # C13377 this is a custom fit hitch that bolts directly to your Nissan with included hardware. I have linked an installation video and attached a photo so you can see what this hitch will look like when it is installed.
You will also need a wiring harness to control your trailer's lights. I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C33HR.
To... view full answer...
The Derale Adjustable Fan-Control Thermostat with Thread-In Probe part # D16749 as you pointed out is a universal fan controller. Therefore I cannot confirm fit on specific applications. That said, what you can do to ensure fit is verify that you have a 12 volt electrical system and have a way to attach the radiator probe which uses a 3/8" NPT fitting. If so, you will be good to go. view full answer...
There are indeed trailer hitch receivers that fit your 2022 Nissan Rogue Sport; I went ahead and verified these fits directly with the manufacturers for you. The fits are the following:
- Curt Trailer Hitch Receiver # C13377
- etrailer Trailer Hitch Receiver # e79YR
These hitches are very much the same, with the same installation and the same bumper and ground clearances, so I recommend going with whichever one is the best price.
The only other thing I wanted to mention, in case you... view full answer...
I was able to verify for you that the Curt hitch is a fit for the 2020 Nissan Rogue Sport; whomever you spoke with simply made a mistake, and the correct fit for the '20 Rogue Sport is indeed the exact part number you mentioned:
- Curt Trailer Hitch Receiver # C13377
We have actually installed the Curt # C13377 on a 2020 Nissan Rogue Sport, as you can see in the photo below; I also checked with the official applications guide from Curt and verified this fit for you. view full answer...
The Draw-Tite # 75902 fits 2008-2020 Rogue models, and although it isn't a fit for your 2021 model, we do have a hitch fit available for the 2021. I'd recommend the Curt Class III, part # C24HR.
If you'll be using the hitch for towing, you'll also need a trailer wiring harness, part # TK76FR, a ball mount like
# 2753 and # 19260 for a 1-7/8 or # 63845 for a 2 inch hitch ball. view full answer...
The Curt Trailer Hitch Receiver # C13377 is confirmed to fit your 2021 Nissan Rogue Sport. While drilling is not required for the mounting holes you may have to enlarge the access holes to get the square hole spacers into the frame with the fish wires.
The Curt T-Connector Vehicle Wiring Harness # C33HR will give you a 4-way flat connector. This is needed to connect to most small trailers that you may tow. It will also allow you to use Auxiliary Lights # C53201 with any hitch mounted accessory... view full answer...
Yes, we have a hitch for your 2021 Nissan Rogue Sport. The Curt Trailer Hitch Receiver # C13377 is confirmed to fit your 2021 Nissan Rogue Sport. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
If you plan to do any towing you can round out a tow package for your 2021 Nissan Rogue Sport by picking up the... view full answer...
Yes, the Inno rack does indeed fit your 2019 Nissan Rogue Sport with a bare roof, and you'll need a few parts to make the crossbars you listed fit, which are the feet that mount the crossbars, and the fit kit that the feet go on. So, the exact parts you need for the Inno roof rack on your 2019 Nissan Rogue Sport with a bare roof are the following:
- Inno Aero Crossbars # INXB138-2
- Inno Through Feet for Aero Crossbars # INXS250
- Fit Kit # INK764
I verified all of this with Yakima... view full answer...
That's an excellent question, and while there is a maximum crossbar thickness, there isn't actually a minimum crossbar thickness for the Swagman Fork Down Roof Mounted Bike Carrier # S64710.
There is a maximum crossbar thickness because the mounting hardware uses clamps with U-bolts that are only so wide, but so long as your crossbars are less than 3 inches in width, the Swagman Fork Down Roof Mounted Bike Carrier # S64710 will easily mount right to your crossbars. view full answer...
We do have a trailer hitch fit for your 2022 Nissan Rogue Sport with the etrailer Trailer Hitch Receiver # e79YR!
If you let me know what you are wanting to use the trailer hitch for I can make some recommendations for you. view full answer...
There are two hitch options for the 2017 Nissan Rogue Sport, Curt Class III 2" hitch part # C13377 and Draw-Tite Class III 2" hitch part # 76177 which are almost exactly the same. The installation, weight capacity and concealed cross tube design are the same for both hitches. The only real difference is that the Curt option is assembled in the USA which is why I recommend it. I have attached an installation video for your reference.
If you need wiring, I recommend Tekonsha T-One Vehicle... view full answer...
The AirBedz XUV Air Mattress w/ Built-In Battery-Powered Pump # 341030 will fit in your 2020 Nissan Rogue Sport just fine even if the backseats don't fold all the way flat. If you check out the linked video of this on a 2015 Toyota 4Runner you'll see that we didn't have the seat all the way flat and we were still able to use it.
The mattress is 66" long x 52" wide (43" at the tailgate) so at 6'3" you won't be able to lay out straight but you could lay a little diagonal and curl up some... view full answer...
The etrailer Trailer Hitch Receiver part # e79YR which is a fit for a 2019 Nissan Rogue Sport also fits the following:
2017 - 2022 Nissan Rogue Sport
If you need replacement hardware, we do offer this as the Replacement Hardware Kit part # RHK. view full answer...
Yes, your 2021 Nissan Rogue Sport SV is 100 percent compatible with the Curt hitch you asked about, with the correct fit being the following part number:
- Curt Trailer Hitch Receiver # C13377
The # C13377 doesn't actually use screws to install on your '21 Rogue Sport, they are Grade 8 bolts, along with the nuts and washers (all of which is included with the hitch); but yes, that is all that is needed in regards to hardware. It will bolt onto the frame and give you a 2 inch hitch with... view full answer...
The etrailer Trailer Hitch Receiver # e79YR is confirmed to fit your 2022 Nissan Rogue Sport and has the 2" receiver that you are needing. This hitch is made in the USA, has a bolt-on, no-drill installation and has a nice matte black finish. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
If you plan to do any towing, you can round out a tow package by adding the Curt T-Connector Vehicle Wiring Harness # C33HR... view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver part # DT85MR is a great option for a 2021 Nissan Rouge and what I recommend using. It should still allow for the hands free liftgate to be operational but you will need to now place your foot on either side of the receiver tube. view full answer...